<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD v1.3 20210610//EN" "https://jats.nlm.nih.gov/publishing/1.3/JATS-journalpublishing1-3.dtd">
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:ali="http://www.niso.org/schemas/ali/1.0/" article-type="review-article" dtd-version="1.3" xml:lang="en">
<front>
<journal-meta>
<journal-id journal-id-type="publisher-id">gcj1</journal-id>
<journal-title-group><journal-title>Remote Sensing of Land</journal-title></journal-title-group>
<issn publication-format="electronic">2582-3019</issn>
<publisher><publisher-name>Gatha Cognition</publisher-name></publisher>
</journal-meta>
<article-meta>
<article-id pub-id-type="doi">10.21523/gcj1.17010104</article-id>
<article-id pub-id-type="publisher-id">gca1</article-id>
<article-categories><subj-group subj-group-type="heading"><subject>Review Article</subject></subj-group></article-categories>
<title-group><article-title>Space-borne Active Microwave Remote Sensing of Soil Moisture: A Review</article-title></title-group>
<contrib-group>
<contrib contrib-type="author"><contrib-id contrib-id-type="orcid" authenticated="false">https://orcid.org/0009-0001-5405-2020</contrib-id><name><surname>Bhagat</surname><given-names>Vijay</given-names></name><xref ref-type="aff" rid="aff1"/></contrib>
</contrib-group>
<aff id="aff1"><institution>Akole Taluka Education Society&apos;sAgasti Arts, Commerce &amp; Dadasaheb Rupwate Science CollegeTal. Akole, Dist. Ahemadnagar, Maharashtra, India(Affiliated to Savitribai Phule Pune University)</institution></aff>
<pub-date publication-format="electronic" date-type="pub"><day>03</day><month>11</month><year>2017</year></pub-date>
<volume>1</volume>
<issue>1</issue>
<fpage>53</fpage><lpage>86</lpage>
<history><date date-type="received"><day>20</day><month>09</month><year>2017</year></date><date date-type="rev-recd"><day>20</day><month>10</month><year>2017</year></date><date date-type="accepted"><day>23</day><month>10</month><year>2017</year></date></history>
<permissions><copyright-year>2017</copyright-year><license license-type="open-access" xlink:href="https://creativecommons.org/licenses/by-nc-nd/4.0/"><ali:license_ref>https://creativecommons.org/licenses/by-nc-nd/4.0/</ali:license_ref><license-p>This is an open access article distributed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND 4.0).</license-p></license></permissions>
<self-uri xlink:href="https://gathacognition.com/article/gca1/space-borne-active-microwave-remote-sensing-of-soil-moisture-a-review"/>
<self-uri content-type="pdf" xlink:href="https://gathacognition.com/uploads/admin/articlefiles/GCJ1M1.pdf"/>
<abstract>
<p>Space-borne active microwave remote sensing is an efficient technique to acquire knowledge of land surface soil moisture (SM). Several studies have reported comparable results of surface SM using space-borne scatterometer responses to backscattering from soil layer. However, detection and measuring of SM using these techniques require an appropriate filtering of data, site-specific calibration of surface roughness parameters, prior knowledge of the study area, specific research purpose, careful selection of model, different suitable datasets with appropriate time series, etc. Reported success studies are very site-, data- and situation-specific and show uncertainty in SM estimations therefore, insufficient to reach global conclusions and applications. Scientific challenge before the community is to develop or modify models and appropriate datasets for SM estimations with simplification and high precision with global applicability for complex bio-physical units. The field is new, active, attractive, challenging and interesting area of research for sustainable land and climate change management.</p>
</abstract>
<kwd-group kwd-group-type="author"><kwd>SAR</kwd><kwd>Scatterometer</kwd><kwd>Polarimetry</kwd><kwd>Dielectric Properties</kwd><kwd>Calibration</kwd><kwd>Modeling</kwd><kwd>Validation</kwd><kwd>Uncertainty</kwd></kwd-group>
</article-meta>
</front>
<body>
<sec id="s1"><title>Introduction</title>
<p>Soil moisture (SM) regulates inland water cycle, soil activities, atmospheric balance, vegetation cover, land degradation, human activities, etc. and therefore, important for sustainable land and climate change management (<xref ref-type="bibr" rid="R677">Sano <italic>et al.,</italic> 2006</xref>; <xref ref-type="bibr" rid="R665">Pellarin <italic>et al.,</italic> 2009</xref>; Bhagat, 2014; <xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>). It is an important variable for weather predictions (<xref ref-type="bibr" rid="R629">Jia <italic>et al.,</italic> 2009</xref>), climate change modeling, surface runoff predictions (<xref ref-type="bibr" rid="R677">Sano <italic>et al.,</italic> 2006</xref>; <xref ref-type="bibr" rid="R633">Kelly <italic>et al.,</italic> 2003</xref>; <xref ref-type="bibr" rid="R593">Brocca, <italic>et al.</italic>, 2010</xref>; <xref ref-type="bibr" rid="R674">Said <italic>et al</italic>., 2012</xref>), flood risk estimations (<xref ref-type="bibr" rid="R680">Schumann and Baldassarre, 2010</xref>), drought monitoring (<xref ref-type="bibr" rid="R700">Wanders <italic>et al.,</italic> 2012</xref>), agricultural area mapping (<xref ref-type="bibr" rid="R703">Wang <italic>et al.,</italic> 2010</xref>), crop modeling (<xref ref-type="bibr" rid="R624">Ines, 2013</xref>), irrigation management (<xref ref-type="bibr" rid="R675">Saindranath <italic>et al</italic>. 2000</xref>;<xref ref-type="bibr" rid="R617"> Hajj <italic>et al.</italic>, 2016</xref>; <xref ref-type="bibr" rid="R674">Said <italic>et al.,</italic> 2012</xref>), etc. and highly varies with space and time, therefore high spatial and temporal resolution requires for realistic results from SM retrieval models (<xref ref-type="bibr" rid="R700">Wanders <italic>et al.,</italic> 2012</xref>). In-situ sensors for SM measurements are costly and provide local information (<xref ref-type="bibr" rid="R617">Hajj <italic>et al.</italic>, 2016</xref>). Land-surface models are unable to produce near-surface SM at local and regional scale (<xref ref-type="bibr" rid="R665">Pellarin <italic>et al,.</italic> 2009</xref>; <xref ref-type="bibr" rid="R629">Jia <italic>et al.,</italic> 2009</xref>).</p>
<p>Remote sensing (RS) techniques provide spatial distribution of SM from few squire meters to kilometers, which not requires areal averaging from point data (<xref ref-type="bibr" rid="R697">Wagner <italic>et al.,</italic> 2007</xref>). Space-borne passive microwave remote sensing of SM is not adequate for requirements of studies at watershed, catchment, and field scale with analyses at finer scale spatial resolution (<xref ref-type="bibr" rid="R602">Das <italic>et al.,</italic> 2008</xref>; <xref ref-type="bibr" rid="R688">Tomer <italic>et al.,</italic> 2015</xref>). However, radar backscatter has significant, strong, positive, linear and independent relationship with volumetric SM (0-5cm depth) (<xref ref-type="bibr" rid="R681">Shoshany <italic>et al.,</italic> 2000</xref>; <xref ref-type="bibr" rid="R671">Romshoo and Musiake, 2003</xref>; <xref ref-type="bibr" rid="R629">Jia <italic>et al.,</italic> 2009</xref>). Therefore, space-borne active microwave sensors like SAR (<xref ref-type="table" rid="T48">Table 1</xref>) are more useful to meet the requirements of spatial resolution for SM analyses at small-scale land surface units i.e. watershed, catchment area, agricultural fields, etc. (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al</italic>., 2008</xref>; <xref ref-type="bibr" rid="R688">Tomer <italic>et al.,</italic> 2015</xref>; <xref ref-type="bibr" rid="R617">Hajj <italic>et al.</italic>, 2016</xref>; <xref ref-type="bibr" rid="R610">Filion, <italic>et al.,</italic> 2016</xref>).</p>
<table-wrap id="T48"><label>Table 1</label><caption><title>SAR Sensors</title></caption><table frame="hsides" rules="groups">
<tbody>
<tr><td rowspan="2">Platform</td><td rowspan="2">Sensor</td><td rowspan="2">Band(s)</td><td rowspan="2">Polarization</td><td colspan="2">Resolutions</td><td>Swath</td><td rowspan="2">Mission</td></tr>
<tr><td>Spatial (m)</td><td>Revisit (days)</td><td>(km)</td></tr>
<tr><td>SEASAT</td><td>SAR</td><td>L</td><td>HH</td><td>25</td><td>16</td><td>100</td><td>1978</td></tr>
<tr><td>SIR-A</td><td>SAR</td><td>L</td><td>HH</td><td>40</td><td></td><td>50</td><td>1981</td></tr>
<tr><td>SIR-B</td><td>SAR</td><td>L</td><td>HH</td><td>25</td><td></td><td>30</td><td>1984</td></tr>
<tr><td>Almar-1</td><td>SAR</td><td>S</td><td>HH</td><td>13</td><td></td><td>172</td><td>1991-92</td></tr>
<tr><td>ERS-1</td><td>AMI</td><td>C</td><td>VV</td><td>30</td><td>40</td><td>100</td><td>1991-2000</td></tr>
<tr><td>JERS-1</td><td>SAR</td><td>L</td><td>HH</td><td>18</td><td>44</td><td>75</td><td>1192-98</td></tr>
<tr><td>SIR-C/X-SAR</td><td>SIR-C; X-SAR</td><td>L,C,X</td><td>VV, HH, HV, VH, HH</td><td>30</td><td></td><td>10-200</td><td>1994</td></tr>
<tr><td>ERS-2</td><td>AMI</td><td>C</td><td>VV</td><td>30</td><td>3 or 30</td><td>100</td><td>1995</td></tr>
<tr><td>RADARSAT-1</td><td>SAR</td><td>C</td><td>HH</td><td>8</td><td>40</td><td>100-170</td><td>1995</td></tr>
<tr><td>SRTM</td><td>C-SAR</td><td>C,X</td><td>VV, HH</td><td>30</td><td></td><td>50</td><td>2000</td></tr>
<tr><td></td><td>X-SAR</td><td></td><td>HH</td><td></td><td></td><td></td><td></td></tr>
<tr><td>ENVISAT</td><td>ASAR</td><td>C</td><td>VV, HH, HH/VV, HV/ HH, VH/VV</td><td>30</td><td>3</td><td>100-400</td><td>2002</td></tr>
<tr><td>ALOS</td><td>PALSAR</td><td>L</td><td>Quad-pol</td><td>10</td><td>3</td><td>70</td><td>2006</td></tr>
<tr><td>TerraSAR-X</td><td>SAR</td><td>X</td><td>Quad-pol</td><td>1</td><td>11</td><td>10-100</td><td>2007</td></tr>
<tr><td>RADARSAT-2</td><td>SAR</td><td>C</td><td>Quad-pol</td><td>3</td><td>40</td><td>10-500</td><td>2007</td></tr>
<tr><td>COSMO/SkyMed Series</td><td>SAR-2000</td><td>X</td><td>Quad-pol</td><td>1</td><td></td><td>10-200</td><td>2007-2010</td></tr>
<tr><td>TecSAR</td><td>SAR</td><td>X</td><td>HH, HV, VH, VV</td><td>1</td><td>3</td><td>40-100</td><td>2008</td></tr>
<tr><td>SAR-Lupe</td><td>SAR</td><td>X</td><td>-</td><td>&lt;1</td><td></td><td>-</td><td>2006-2008</td></tr>
<tr><td>Kondor-5</td><td>SAR</td><td>S</td><td>HH, VV</td><td>12-3</td><td>r</td><td>-</td><td>2008</td></tr>
<tr><td>TanDEM-X</td><td>SAR</td><td>X</td><td>Quad-pol</td><td>1</td><td>11</td><td>10-150</td><td>2009</td></tr>
<tr><td>RISAT</td><td>SAR</td><td>C</td><td>Quad-pol</td><td>3</td><td></td><td>30-240</td><td>2009</td></tr>
<tr><td>ARKON-2</td><td>SAR</td><td>X,C,P</td><td>-</td><td>2</td><td></td><td>-</td><td>2011</td></tr>
<tr><td>Sentinel-1</td><td>C-SAR</td><td>C</td><td>Quad-pol</td><td>5</td><td>12</td><td>80-400</td><td>2011</td></tr>
<tr><td>MapSAR</td><td>SAR</td><td>L</td><td>Quad-pol</td><td>3</td><td></td><td>20-55</td><td>2011</td></tr>
<tr><td>KompSAT-5</td><td>SAR</td><td>X</td><td>HH, HV, VH, VV</td><td>20</td><td>28</td><td>100</td><td>2011</td></tr>
<tr><td>SAOCOM-1</td><td>SAR</td><td>L</td><td>Quad-pol</td><td>7</td><td>8</td><td>50-400</td><td>2011</td></tr>
<tr><td>RISAT-1</td><td>SAR</td><td>C</td><td>Quad-pol</td><td>1</td><td>25</td><td>10-225</td><td>2012</td></tr>
<tr><td>HJ-1C</td><td>SAR</td><td>S</td><td>HH, VV</td><td>20</td><td>4</td><td>-</td><td>2012</td></tr>
<tr><td>Terra-SAT</td><td>SAR</td><td>X</td><td>HH, VV</td><td>&lt;1</td><td>11</td><td>5-266</td><td>2013</td></tr>
<tr><td>SMAP</td><td>SAR</td><td>L</td><td>HH, HV, VV</td><td>3km</td><td>1-2</td><td>300-1000</td><td>2013</td></tr>
<tr><td>ALOS-2</td><td>PALSAR-2</td><td>L</td><td>Quad-pol</td><td>3</td><td>14</td><td>25-490</td><td>2014</td></tr>
<tr><td>DESDynl</td><td>SAR</td><td>L</td><td>Quad-pol</td><td>25</td><td></td><td>&gt;340</td><td>2015</td></tr>
</tbody>
</table>
</table-wrap>
<p>SM retrievals using active microwaves space based sensors are very attractive for meteorological: climatological analysis (<xref ref-type="bibr" rid="R715">Zribi <italic>et al.,</italic> 2011</xref>), weather forecasting, drought analyses; hydrological: runoff estimations (<xref ref-type="bibr" rid="R593">Brocca <italic>et al.,</italic> 2010</xref>), flood studies, wetland detection (<xref ref-type="bibr" rid="R607">Dwivedi <italic>et al,.</italic> 2000</xref>); agronomic: agricultural productivity predictions; human health analysis; national security analysis, etc. (<xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.,</italic> 2008</xref>; <xref ref-type="bibr" rid="R609">Entekhabi <italic>et al.,</italic> 2010</xref>). Scholars have reported better results of SM retrievals from active sensors than the passive sensors (<xref ref-type="bibr" rid="R700">Wanders <italic>et al.,</italic> 2012</xref>). SM estimations are: 1) more realistic for near surface retrievals (<xref ref-type="bibr" rid="R665">Pellarin <italic>et al.,</italic> 2009</xref>; Wanders <italic>et al.,</italic> 2012); 2) relatively unaffected by cloud cover: atmospheric water and hydrometeors for microwave backscatter (<xref ref-type="bibr" rid="R633">Kelly <italic>et al.</italic> 2003</xref>); 3) change detection from dry (0%) to very humid (100%) soils (5cm deep) (<xref ref-type="bibr" rid="R603">Djamai, <italic>et al.,</italic> 2015</xref>); 4) possibilities of finer scale, field level estimations and variation analysis (<xref ref-type="bibr" rid="R671">Romshoo and Musiake, 2003</xref>; <xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>); and 5) useful for SM analysis over irrigated areas (<xref ref-type="bibr" rid="R617">Hajj <italic>et al.,</italic> 2016</xref>).</p>
<p>Radar backscatters are sensitive to land surface characteristics including the dielectric constant (<xref ref-type="bibr" rid="R615">Gorrab <italic>et al.,</italic> 2015</xref>) and surface roughness (Root Mean Square (rms) height and correlation length) of the soil (<xref ref-type="bibr" rid="R712">Zribi and Dechambre, 2003</xref>), and the physical and geometrical properties of vegetation (vegetation water content, backscatter size, shape, orientation, etc.) (<xref ref-type="bibr" rid="R686">Srivastava <italic>et al.,</italic> 2015</xref>), the local incidence angle (<xref ref-type="bibr" rid="R591">Braun and Hochschild, 2017</xref>), frequency and polarization (<xref ref-type="bibr" rid="R663">Patel <italic>et al.,</italic> 2006</xref>). SM can be detected and delineated using different methods and techniques reported in the literature (<xref ref-type="bibr" rid="R712">Zribi and Dechambre, 2003</xref>; <xref ref-type="bibr" rid="R605">Du <italic>et al.,</italic> 2010</xref>) are: (a) quantitative measurements of SM for bear soils using polarized SAR data- 1) dual-polarization e.g. L-band SAR data (<xref ref-type="bibr" rid="R606">Dubois <italic>et al.</italic>, 1995</xref>) (2) three-polarization SAR measurements (Oh <italic>et al.</italic>, 1992), (b) multi-incidence angle SAR data for correcting the effects of surface roughness, (c) combination of optical data and SAR measurements for correcting vegetation effects, (d) change detection of SM using repeat SAR data; (e) Bayesian method of soil moisture estimations, (f) combination of active microwave data and passive microwave data. Thus, 1) finer spatial resolution, 2) multiple satellite sensors, 3) strong relation to <italic>V<sub>sm</sub></italic> , 4) penetration up to ~5cm depth, and 5) insensitive to clouds and 6) less sensitive to atmospheric condition including smoke, fog, rain, snow, etc. (<xref ref-type="bibr" rid="R708">Yue<italic> et al., </italic>2016</xref>) are commonly reported advantages of the radar sensing of SM (<xref ref-type="bibr" rid="R647">Moran <italic>et al.,</italic> 2004</xref>).</p>
<p>Scholars like <xref ref-type="bibr" rid="R696">Verhoest <italic>et al.</italic> (2008)</xref>, <xref ref-type="bibr" rid="R701">Wang and Qu (2009)</xref>, <xref ref-type="bibr" rid="R582">Barrett <italic>et al.</italic> (2009)</xref>, <xref ref-type="bibr" rid="R601">Das and Paul (2015)</xref>, etc. have reviewed scholarly literature on SM retrievals using active MW sensors. <xref ref-type="bibr" rid="R696">Verhoest <italic>et al.</italic> (2008)</xref> have summarized the problems encountered when parameterizing soil roughness and impact of the errors made on the retrieved soil moisture and noted need of more studies on the uncertainty assessment of SM retrieval models. <xref ref-type="bibr" rid="R701">Wang and Qu (2009)</xref> have reviewed applications of satellite based active microwave remote sensing (AMWRS) of surface SM. <xref ref-type="bibr" rid="R582">Barrett <italic>et al.</italic> (2009)</xref> have reviewed the current status to highlight the key areas for research in SM retrievals using active MW remote sensing data. <xref ref-type="bibr" rid="R601">Das and Paul (2015)</xref> also have reviewed research reports on SM retrieval using active MW remote sensing data and different models. Ouchi (2013) has reviewed recent trends and development of SAR with related techniques, selected topics and applications. Further, this study focussed on review the applicability to models available for SM retrievals to outline the trends and scope for further studies.</p>
</sec>
<sec id="s2"><title>Space-Borne Active Microwave Remote Sensing</title>
<p>Active microwave remote sensors like SAR have capacity to get high resolution images during day-night time in all-weather conditions (Ouchi, 2013) however, microwaves are very sensitive to geometric conditions at surface like topography, soil texture, surface roughness, vegetation cover, SM, etc. (<xref ref-type="bibr" rid="R588">Blumberg <italic>et al.,</italic> 2002</xref>; <xref ref-type="bibr" rid="R699">Walker <italic>et al.,</italic> 2004</xref>; <xref ref-type="bibr" rid="R676">Sanli, <italic>et al.</italic> 2008</xref>). Active sensors (e.g. SAR) offer SM data at higher spatial resolution compared to passive sensors (<xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>). <xref ref-type="bibr" rid="R700">Wanders <italic>et al.</italic> (2012)</xref> reported more realistic performance of ASCAT than AMSR-E and SMOS for estimation of actual near-surface SM over Spain. SAR data relatively unaffected by cloud cover including atmospheric water and hydrometeors for microwave backscatter at 5.3GHz (<xref ref-type="bibr" rid="R633">Kelly <italic>et al.</italic>, 2003</xref>).</p>
<p>There are two active microwave main sensor types: 1) synthetic aperture radar (SAR) and 2) scattermeters. We have several advanced space borne SAR sensors (Table 1) (<xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>; <xref ref-type="bibr" rid="R605">Du <italic>et al.</italic>, 2010</xref>; Ouchi, 2013). Popular approaches of SAR data used for SM retrievals are (<xref ref-type="bibr" rid="R588">Blumberg <italic>et al.,</italic> 2002</xref>): 1) time series, 2) quad-polarized, and 3) multiple-look angle.</p>
<p>The backscattering coefficient of ERS-2 SAR data shows high sensitivity to surface SM at a field scale (<xref ref-type="bibr" rid="R671">Romshoo and Musiake, 2003</xref>). Airborne SAR data captured at an incidence angle between 10º and 20º and C-band frequencies are suggested for SM monitoring therefore, theoretically ERS-1 SAR is an ideal SM sensor as they are capturing the data at incidence angle of 23º, and C-band, 5.3GHz frequency at VV -polarization with 30m spatial resolutions (<xref ref-type="bibr" rid="R633">Kelly <italic>et al., </italic>2003</xref>). The ERS SAR data is single polarized and single frequency. Therefore, multiple look scenes have been used in different studies to solve the parametric problems: more sensitive to surface roughness and less to the dielectric properties (<xref ref-type="bibr" rid="R588">Blumberg <italic>et al.,</italic> 2002</xref>).</p>
<p>The new ENVISAT Advanced Synthetic Aperture Radar (ASAR) Wide Swath Mode (WSM) data (single-frequency (C-band), single-polarization (VV)) provide good potential for routinely monitoring near surface SM due to the increased temporal revisit capability compared with ERS2 SAR (<xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>). ASAR can be operated in different modes i.e. 1) Narrow Swath modes at high resolution (30 m) and 2) Wide Swath modes at medium resolution (150 m) with temporal revisit capability of 3–5 days, area coverage of 400 × 400 km and resolution of 1km. <xref ref-type="bibr" rid="R699">Walker <italic>et al.</italic> (2004)</xref> have used C-band vertically polarized SAR data captured using Second European Remote Sensing (ERS-2) satellite to estimate SM in surface layer<xref ref-type="bibr" rid="R715">. Zribi <italic>et al.</italic> (2011)</xref> have estimated SM for evaluation of soil evaporation using ENVISAT-ASAR images over semi-arid region in North Africa. ASCAT data expresses values between 0 and 100 for very dry and very wet conditions, respectively (<xref ref-type="bibr" rid="R700">Wanders <italic>et al.,</italic> 2012</xref>). Further, <xref ref-type="bibr" rid="R603">Djamai <italic>et al.</italic> (2015)</xref> have estimated variation in SM for the top soil layer (5cm deep) using ASCAT from onboard the Meteorological Operational (MetOp). HJSAR carries S-band (3.2 GHz) has good penetration ability with \( P_{VV}\), 24 hours revisit period and 20m ground resolution (<xref ref-type="bibr" rid="R605">Du <italic>et al.,</italic> 2010</xref>). <xref ref-type="bibr" rid="R665">Pellarin <italic>et al. </italic>(2009)</xref> have used AMSR and METEOSAT second generation (MSG) measurements for retrieval algorithm for the quality SM estimates.</p>
<p><xref ref-type="bibr" rid="R712">Zribi and Dechambre (2003)</xref> have proved usefulness of RARDARSAT and ASAR-ENVISAT data captured using simultaneous dual incidence angle mode to characterize bare soil parameters. <xref ref-type="bibr" rid="R639">Kurucu <italic>et al. </italic>(2009)</xref> have fused Radarsat-1 fine beam mode image pertaining to the low lands with a satellite pour l’Observation de la Terre (SPOT)-2 satellite image of the same date for SM assessments for drought monitoring.</p>
<p><xref ref-type="bibr" rid="R573">Aubert <italic>et al. </italic>(2013)</xref> have used TerraSAR-X data based on empirical soil moisture estimation logarithm for estimation of SM over agriculture area. <xref ref-type="bibr" rid="R601">Das and Paul (2015)</xref> have reported good potential of RISAT-1 images for the identification of local variations of soil dielectric constant (e), texture and SM. <xref ref-type="bibr" rid="R615">Gorrab <italic>et al. </italic>(2015)</xref> have used an empirical change detection approach using TerraSAR-X data and ground auxiliary PhetaProbe network measurements for SM estimations. <xref ref-type="bibr" rid="R617">Hajj <italic>et al.</italic> (2016)</xref> have developed an inversion approach to estimate surface SM over irrigated areas using SAR data (X-band). Further, <xref ref-type="bibr" rid="R686">Srivastava <italic>et al.</italic> (2015)</xref> have reported mapping abilities using SM retrieval models and multi-polarized SAR data without making any assumptions. However, little information is available about the applications of radar backscatter to estimate the SM distributions in transition zones between humid and semi-arid climates (<xref ref-type="bibr" rid="R681">Shoshany <italic>et al.,</italic> 2000</xref>).</p>
</sec>
<sec id="s3"><title>Radiometry</title>
<p>Radar backscattering coefficient can be expressed as (<xref ref-type="bibr" rid="R650">Narayanan <italic>et al.,</italic> 1999</xref>): 1) soil dielectric properties and 2) soil roughness properties. Fundamental differences between passive and active microwave remote sensing are: 1) passive microwave remote sensors records emitted energy from soil in microwave, therefore depending upon soil microwave emissivity (<xref ref-type="bibr" rid="R706">Wigneron <italic>et al</italic>., 2003</xref>) and 2) active microwave sensors records backscattered energy from soil which was transmitted from same satellite therefore depending upon deference between amount of energy transmitted and received back.</p>
<sec id="s3-1"><title>3.1 Backscatter</title>
<p>Radar backscatters from soil surface show positive relation with near surface soil moisture (<xref ref-type="bibr" rid="R588">Blumberg <italic>et al.,</italic> 2002</xref>) and roughness (<xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>). It decreases with increasing incidence angle and with decreasing roughness (<xref ref-type="bibr" rid="R606">Dubois <italic>et al.,</italic> 1995</xref>). Microwave backscatter usually expressed as backscattering coefficient (\(\sigma ^{0}\)) (1) (<xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>). \(\sigma ^{0}\) demonstrates the combined effects of surface conditions (roughness and vegetation) and radar configurations (frequency, polarization, incident angle) (<xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>). It is the function, \(f\) of SM\( \theta _{S}\) and surface roughness.</p>
</sec>
<sec id="s3-2"><title>\(\sigma ^{0}=f \left( h_{RMS},l \theta _{s} \right)\) after <xref ref-type="bibr" rid="R668">Rahman <italic>et al.</italic> (2008)</xref> (1)</title>
<p>Surface roughness can be modeled using the root mean squared height (\( h_{RMS}\)) and the correlation length (\(l\)) of the same height variation.</p>
<p>\(\sigma ^{0}\) is composition of three contributors (2) from vegetated surface:</p>
<p>\(\sigma ^{0}= \tau^{2} \sigma _{s}^{0}+ \sigma _{veg}^{0}+ \sigma _{int}^{0} \) after <xref ref-type="bibr" rid="R647">Moran <italic>et al.</italic>(2004)</xref> (2)</p>
<p>where, \(\sigma ^{0}_s\) is backscatter from bare soil surface, \(\tau^{2}\) is two-way attenuation of the vegetation, \(\sigma ^{0}_{veg}\) is direct backscatter contribution of the vegetation and \(\sigma ^{0}_{int}\) is multiple scattering from the vegetation and ground surface (<xref ref-type="bibr" rid="R647">Moran <italic>et al.,</italic> 2004</xref>). \(\sigma ^{0}_s\) has functional relationship (3) with SM,, \( V _{SM}\) as:</p>
<p>\(\sigma _{s}^{0}=f \left( R,~V_{SM} \right)\) after <xref ref-type="bibr" rid="R647">Moran <italic>et al.</italic> (2004)</xref> (3)</p>
<p>where, \(R\) is surface roughness term.</p>
<p>Further, <xref ref-type="bibr" rid="R668">Rahman <italic>et al.</italic> (2008)</xref> have suggested equation for estimations of \(l\) (4) and \( h_{RMS}\) (5) for parameterize IEM for preparation of surface SM map.</p>
<p>\(l= \omega \left( \Delta \sigma ^{0}, \sigma _{dry}^{0} \right)\) after <xref ref-type="bibr" rid="R668">Rahman <italic>et al.</italic> (2008)</xref> (4)</p>
<p>\(h_{RMS}= \psi \left( \Delta \sigma ^{0}, \sigma _{dry}^{0} \right)\) after <xref ref-type="bibr" rid="R668">Rahman <italic>et al.</italic> (2008)</xref> (5)</p>
<p>where, \(\omega\) and \(\psi\) are functions determined by substitution of terms. Three radar images require for roughness mapping. Two images with different incidence angles for determination of \(\Delta \sigma ^{0}\) and one with dry ground condition for measurement of \(\sigma ^{0}_{dry}\). It can be calculated using two images captured in dry and wet conditions. The values of \(l\) and \( h_{RMS}\) can be substituted in the equation for \(\sigma ^{0}\) as (6):</p>
<p>\(\sigma _{wet}^{0}= \lambda \left( \Delta \sigma ^{0}, \sigma _{dry}^{0}, \theta _{S} \right) \) after <xref ref-type="bibr" rid="R668">Rahman <italic>et al.</italic> (2008)</xref> (6)</p>
<p>here, subscript ‘wet’ in \(\sigma ^{0}_{wet}\) is used to distinguish it from backscatter of dry surface. This equation can be inverted (7) for estimation of surface SM as:</p>
<p>\(\theta _{S}= \lambda ^{-1} \left( \Delta \sigma ^{0}, \sigma _{dry}^{0}, \sigma _{wet}^{0} \right)\)after <xref ref-type="bibr" rid="R668">Rahman <italic>et al.</italic> (2008)</xref> (7)</p>
<p>where, \(\Delta \sigma ^{0}\) and \(\sigma ^{0}_{dry}\) are function of roughness parameters as \(\Delta \sigma ^{0} \left( h_{RMS},l \right)\) and \(\sigma _{dry}^{0} \left( h_{RMS},l \right)\).</p>
<p>The digital number (DN) of the ASAR data can be converted into radar backscattering coefficient, \(\sigma _{i,j}\) (8) as:</p>
<p>\(\sigma _{i,j}=\frac{DN_{i,j}^{2}}{K}sin \left( \alpha _{i.j} \right)\) after <xref ref-type="bibr" rid="R668">Rahman <italic>et al.</italic> (2008)</xref>, <xref ref-type="bibr" rid="R703">Wang <italic>et al.</italic> (2010)</xref> (8)</p>
<p>where, \(DN _{i,j}\) is the digital number of the pixel (\(i, j\)), \(a_{i, j}\) is the incidence angle, and \(K\) is calibration constant.</p>
<p>The polarized backscattering coefficient, σ⁰ can be expressed as:</p>
<p>\(\sigma _{VH}^{0}=\frac{k^{2}}{2}e^{2k_{z}^{2} \sigma ^{0}} \sum _{n=1}^{\infty} \sigma ^{2n} \vert I_{VH}^{n} \vert ^{2} \left[ \frac{W^{ \left( n \right) } \left( -k_{x},0 \right) }{n~!} \right]\) after <xref ref-type="bibr" rid="R671">Romshoo and Musiake (2004)</xref> (9)</p>
<p>where, \(\sigma _{VH}^{0}\) is the polarized radar backscatter; \(V\) and \(H\) are vertical and horizontal polarisation; \(k_{z}=\ k\ cos \theta \) and \(k_{x}=k\ sin \theta \), \(\sigma \) is surface \(rms\) height and \(W^{ \left( n \right) } \left( u,~v \right)\) is the roughness spectrum of the surface.</p>
<p><xref ref-type="bibr" rid="R671">Romshoo and Musiake (2004)</xref> have reported good agreement of estimation using the Dubois model for either no or sparse vegetation.</p>
<p>The radar backscatter (\(\sigma \)) of soil, with a range of moisture concentrations, can be approximated (10) as:</p>
<p>\(\sigma \left( dB \right) =aV_{sm}+b \) after <xref ref-type="bibr" rid="R681">Shoshany <italic>et al.</italic>(2000)</xref> (10)</p>
<p>where, \(a\) and \(b\) are empirical coefficients and \(V_{sm}\) is volumetric SM.</p>
<p>Nonlinear relationship between backscatter volumetric SM observed for bare soils and linear relation is found over vegetated areas (<xref ref-type="bibr" rid="R651">Narvekar <italic>et al.,</italic> 2015</xref>). Therefore, nonlinear models are useful for estimations of SM using backscatter coefficient on bear soil and linear over vegetated areas (see next sections).</p>
<p>Backscatter coefficient can be converted into dB using following equation (11):</p>
<p>\(\sigma _{dB}^{0}=10log_{10} \sigma ^{0}\) after <xref ref-type="bibr" rid="R637">Kong and Dorling (2008)</xref> (11)</p>
<p>For radar, co-polarized backscatter from earth surface is the product (12) of three components i.e. 1) soil surface backscatterer– two-way attenuation through a vegetation layer, 2) the backscatter from the vegetation and 3) the interaction between the vegetation and soil surface (<xref ref-type="bibr" rid="R701">Wang and Qu, 2009</xref>). Radars corporatized backscatter, \(\sigma _{pp}^{ \tau}\) is combination of three components (12):</p>
<p>\(\sigma _{PP}^{ \tau}= \sigma _{PP}^{s}~.exp \left( -2~.~ \tau_{c} \right) + \sigma _{PP}^{vol}+ \sigma _{PP}^{int}\) <xref ref-type="bibr" rid="R692">Ulaby <italic>et al.,</italic> (1996</xref>) (12)</p>
<p>where, \(\sigma _{PP}^{s}\) is soil surface backscatter, \(\tau_{c}\) is two-way attenuation through a vegetation layer of opacity, \(\sigma _{PP}^{vol}\) is backscatter from the vegetation volume and \(\sigma _{PP}^{int}\) represents interaction between the vegetation and soil surface. Soil surface backscatter dominates the backscatter for bare surface and influenced by soil SM and surface roughness (<xref ref-type="bibr" rid="R701">Wang <italic>et al</italic>., 2009</xref>).</p>
</sec>
<sec id="s3-3"><title>3.2 System Parameters</title>
<p>Parameters of microwave sensor are wavelength, polarization and incidence angle related to nadir (<xref ref-type="bibr" rid="R679">Schmugge, 1976</xref>).</p>
</sec>
<sec id="s3-4"><title><italic>3.2.1 Wavelength</italic></title>
<p>X-band (shorter wavelengths, 3cm) reflects from canopy surface of vegetation, L-band (longer wavelengths, 24cm) penetrate through the canopy and reflect from the soil surface and C-band (intermediate wavelengths, 6cm) reflects from both the canopy and soil surface (<xref ref-type="bibr" rid="R582">Barrett <italic>et al.</italic>, 2009</xref>). X- and L-band (TerraSAR-X, CosmoSkyMed and ALOS), and C-band with polarimetric data (RADARSAT-2) are widely suggested for better characterization of surface parameters (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2008</xref>). These bands provide data in combination of co-polarization (\( P_{VV},~P_{HH}\)) and Cross-polarization (\(P_{VH},~P_{HV}\)) (Table 1) and show exponential relationship with surface roughness over bare soil (<xref ref-type="bibr" rid="R716">Zribi <italic>et al.,</italic> 2016</xref>). Therefore, many researchers have successfully used X- and C-bands to estimate the SM of bare soil with good results (<xref ref-type="bibr" rid="R617">Hajj <italic>et al.,</italic> 2016</xref>). C-band (4-5GHz) penetrates into soil layer of 1-2cm, determines the composite reflection coefficient and sensitive to canopy. Further, <xref ref-type="bibr" rid="R632">Kaojarern <italic>et al.</italic> (2004)</xref> have reported potential depth of SM using C-band up to 10cm. This frequency can penetrate better into the dry vegetation canopy and at low incidence angles (<xref ref-type="bibr" rid="R699">Walker <italic>et al.,</italic> 2003</xref>). C-band radar signals are directly dependent on the share of sand and clay in the soil. The sensitivity of radar signals to SM increases with decreasing soil clay content (<xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>). Zribi <italic>et al.,</italic> (2007) have used C-band ASAR/ENVISAT for estimation of SM over bare soil with low-density vegetation and using data acquired at low-incidence angle. Further, <xref ref-type="bibr" rid="R632">Kaojarern <italic>et al.</italic> (2004)</xref> have been used C-band data for monitoring the SM in post-harvest rice field in Thailand. <xref ref-type="bibr" rid="R637">Kong and Dorling (2008)</xref> have estimated SM suing C-band, single-polarization (\(VV\)) images captured in descending mode and PCA technique. However, sensitivity of C-band to canopy makes difficult to separate SM induced scattering from rough soil surface including vegetation (<xref ref-type="bibr" rid="R650">Narayanan et al., 1999</xref>; <xref ref-type="bibr" rid="R672">Rötzer <italic>et al., </italic>2015</xref>). It is difficult to map SM using C-band over vegetated area (<xref ref-type="bibr" rid="R602">Das <italic>et al.,</italic> 2008</xref>) and discriminates between surface roughness is greater than 1.5cm (<xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.,</italic> 2008</xref>). C-band gives response to crop structure and foliage and L-band dependents vegetation characteristics like tree branch and trunk structures. L-band is useful to estimate SM up to 5cm in top soil layer and 20cm for uniform SM distribution in the profile and insensitive to short and modest vegetation cover as compared to SM and surface roughness (<xref ref-type="bibr" rid="R650">Narayanan <italic>et al.,</italic> 1999</xref>). They penetrate through thin canopy layer of crops (<xref ref-type="bibr" rid="R667">Rahman and Sumantyo, 2012</xref>). C- and X-bands penetrate less in forested areas (<xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.,</italic> 2008</xref>). Therefore, L-band (1-2GHz) are the most promising techniques for SM retrievals (<xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>; <xref ref-type="bibr" rid="R599">Colliander, 2016</xref>) than the C- and X-bands. Scholars show better penetration capability in vegetation, relatively less sensitive to short and sparse vegetation and useful for detection and estimation of SM for agricultural as well as hydrological applications <xref ref-type="bibr" rid="R650">(Narayanan <italic>et al.,</italic> 1999</xref>). L-band data with low incidence angles is suggested for minimization of the effect of vegetation and surface roughness. Further, \(\sigma _{HV}^{0}/ \sigma _{VV}^{0}\), signal (L-band) ratio are useful to distinguish bare soils from vegetation cover (<xref ref-type="bibr" rid="R573">Aubert <italic>et al.</italic>, 2013</xref>). However, <xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.</italic> (2008)</xref> have noted weak backscattering from wheat at X-band, and negligible at L- and C-bands.</p>
<p>X-band signals have equivalent potential to C-band for SM mapping (<xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.,</italic> 2008</xref>). <xref ref-type="bibr" rid="R573">Aubert <italic>et al.</italic> (2013)</xref> have studied relationship between TerraSAR-X signals acquired at mono SAR configurations (incidence angle and polarization) and SM data for training database of 182 bare plots. <xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.</italic> (2008)</xref> have suggested X-band for analysis SM ranges between 27% and 32%. <xref ref-type="bibr" rid="R636">Kirimi <italic>et al.</italic> (2015)</xref> used TerraSAR-X SM retrievals using the Oh Model. Further, <xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.</italic> (2008)</xref> reported weak potential of this band for mapping the surface roughness.</p>
<p><xref ref-type="bibr" rid="R601">Das and Paul (2015)</xref> have reported positive relationship of backscattering coefficient calculated for band RH and RV with volumetric moisture content in tropical dry and sub-humid zones in India. P-band penetrates into deeper soils but requires larger antenna and unmanageable from space-borne platforms (<xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic>, 1999</xref>).</p>
<p>L-band (0.3-3GHz) was used for the characterization of the dielectric constant for estimations of SM over arid soils (<xref ref-type="bibr" rid="R613">Gharechelou <italic>et al.,</italic> 2015</xref>). The depth of microwave penetration in soil profile depends on wavelength and the complex dielectric constant of the soil. It can be express (13) as:</p>
<p>\(\delta p \cong \frac{ \lambda *\sqrt[]{ \varepsilon ^{&apos;}}}{2 \pi * \varepsilon ^{&quot;}}\) <xref ref-type="bibr" rid="R686">Srivastava <italic>et al.</italic> (2015)</xref> (13)</p>
<p>where, \(\delta p\) is depth of penetration, \(\lambda \) is wavelength, \(\varepsilon ^{&apos;}\) is real part of complex dielectric constant; \(\varepsilon ^{&quot;}\) is imaginary part of complex dielectric constant. Thus, L-, X-, and C-bands have potential of SM retrievals with in-depth knowledge of soil surface characteristics. There is large contrast between the dielectric properties of soil and water. Backscatter increases with increasing water content in soil (<xref ref-type="bibr" rid="R588">Blumberg <italic>et al.,</italic> 2002</xref>). However, shorter wavelength is relatively more sensitive to the surface roughness.</p>
<p>Figure modified after <xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>.</p>
</sec>
<sec id="s3-5"><title>3.2.2 Polarization (P)</title>
<p>Radar backscatters depend on topography, soil texture, surface roughness and soil moisture (<xref ref-type="bibr" rid="R699">Walke <italic>et al.,</italic> 2003</xref>) therefore, the data recorded using single configuration (polarization and incidence angle) is not sufficient for detection of SM specially under mature crops (<xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.,</italic> 2011</xref>). Radar data in multi-frequency, multi-polarization or multi-angle makes possible to separate the roughness, vegetation, topography, and soil moisture effects on recorded radar signals (Oh <italic>et al.,</italic> 1992; <xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>).</p>
<p>The vertical polarization is more sensitive to SM than the horizontal polarization (<xref ref-type="bibr" rid="R651">Narvekar <italic>et al.,</italic> 2015</xref>) and cross-polarized SAR data at longer wavelength has been suggested for the quantitative retrievals of vegetation (<xref ref-type="bibr" rid="R663">Patel <italic>et al.,</italic> 2006</xref>). Microwave sensors (X-, L- and C-band) provide polarimetric data: co-polarized (\( P_{VV},~P_{HH}\)) and cross-polarised (\(P_{VH},~P_{HV}\)) data. The co-polarization backscattering coefficients are expression of nonlinear functions of the surface dielectric constant, the incidence angle, the wavelength and the root mean square of surface height (<xref ref-type="bibr" rid="R701">Wang 2009</xref>). Fully polarimetric data reduce ambiguity of the outcome (<xref ref-type="bibr" rid="R638">Kumar <italic>et al.</italic>, 2017</xref>).</p>
<p>Cross-polarised (\(P_{VH},~P_{HV}\)) values are lower than the co-polarized (\( P_{VV},~P_{HH}\) values for magnitude therefore, more prone to errors (<xref ref-type="bibr" rid="R650">Narayanan <italic>et al.,</italic> 1999</xref>). Co-polarized signals are less sensitive to vegetation, easy to calibrate and less susceptible to system noise (<xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>). Backscattering coefficient with \(P_{HH}\) is more sensitive to soil moisture than \( P_{HV}\). Therefore, \(P_{HH}\) and \( P_{VV}\) improve estimation of SMC (Baghdadi <italic>et al., </italic>2015). Further, Zribi <italic>et al.</italic> (2007) have noted similar results \(HH\) and \(VV\) -polarizations. However, <xref ref-type="bibr" rid="R613">Gharechelou <italic>et al.</italic> (2015)</xref> have reported that \(HV\) -polarization is more sensitive to soil moisture than the \(HH\) over Aridic soils in Iran. <xref ref-type="bibr" rid="R667">Rahman and Sumantyo (2012)</xref> have used dual-polarized SIR-C and PALSAR backscatter data for forest analysis.</p>
<p>Cross-polarized data is more useful for analyzing the contribution of vegetation in the total backscattering (<xref ref-type="bibr" rid="R652">Necsoiu<italic> et al., </italic>2013</xref>). Vertical polarization is less sensitive to vegetation coverage than the horizontal polarization (<xref ref-type="bibr" rid="R629">Jia <italic>et al.,</italic> 2009</xref>).Vegetation strongly absorbs the signals in \(VV\) channel and \(HH\) is more sensitive for SM in near surface (<xref ref-type="bibr" rid="R661">Pasolli <italic>et al.,</italic> 2014</xref>). Further, <xref ref-type="bibr" rid="R590">Bourgeau-Chavez <italic>et al.</italic> (2007)</xref> have reported that \(VV\)-polarization (ERS-2) is less sensitive than \(HH\)-polarization to the orientation of plant leaves. <xref ref-type="bibr" rid="R605">Du <italic>et al</italic>. (2010)</xref> have successfully used \(VV\)-polarisation at S-band of HJ SAR for SM retrievals. Therefore, \( P_{HV}\) removes the effect of vegetation and \(P_{HH}\) provides slightly better results than \(P_{VV}\) (<xref ref-type="bibr" rid="R621">Holah <italic>et al.,</italic> 2005</xref>). However, \(VH\) and \(HV\) are strongly correlated and give similar information (<xref ref-type="bibr" rid="R661">Pasolli <italic>et al.,</italic> 2014</xref>). \(HH\) and \(HV\) channels of SAR are highly recommended to determine more precise estimations of SM (<xref ref-type="bibr" rid="R621">Holah <italic>et al.,</italic> 2005</xref>; <xref ref-type="bibr" rid="R661">Pasolli <italic>et al.,</italic> 2014</xref>).</p>
<p>PALSAR is reported as the most cost effective for providing data compared to ASAR versus RADARSAT at \(VV\) polarisation for better estimations of SM (<xref ref-type="bibr" rid="R676">Sanli <italic>et al.,</italic> 2008</xref>). Further, <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref> have recommended ASAR data at \( P_{VV}\) with more potential than RADARSAT-1 for SM estimation however, <xref ref-type="bibr" rid="R676">Sanli <italic>et al.</italic> (2008)</xref> found no better outputs. An inversion algorithm based on the co-polarized data will be more robust for vegetation and however, overestimate surface roughness and underestimate soil moisture (<xref ref-type="bibr" rid="R606">Dubois <italic>et al. </italic>1995</xref>). Further, <xref ref-type="bibr" rid="R576">Baghdadi <italic>et al</italic>. (2013)</xref> have compared the fully polarimetric data at X-, C-, L-, P-, and UHF-bands and found no relevance of polarimetric parameters for characterization of the soil surface (moisture content and surface roughness) over bare agricultural areas. Therefore, more studies are required to find wide applicability of polarised data in different bio-physical units.</p>
</sec>
<sec id="s3-6"><title>3.2.3 Incidence Angle (<italic>θ</italic>)</title>
<p>Contribution of the backscattering from soil surface to the total backscattering mainly depends on the incidence angle (<xref ref-type="bibr" rid="R619">Hégarat-Mascl <italic>et al.</italic>, 2002</xref>) and the characteristics of the vegetation. C-band energy penetrates through canopy with steep incidence angles over sparse vegetation (<xref ref-type="bibr" rid="R590">Bourgeau-Chavez <italic>et al.,</italic> 2007</xref>). Therefore, incidence angle below 30º is recommended for retrieval analysis of SM content (<xref ref-type="bibr" rid="R652">Necsoiu <italic>et al.,</italic> 2013</xref>, <xref ref-type="bibr" rid="R610">Filion <italic>et al.,</italic> 2015</xref>). <xref ref-type="bibr" rid="R648">Moran <italic>et al.</italic> (2000)</xref> have used C-band, \(VV\) -polarized data captured at 23º incidence angle to minimize the influence diversity in terrain and vegetation. <xref ref-type="bibr" rid="R619">Hégarat<bold>-</bold>Mascl <italic>et al.</italic> (2002)</xref> show linear relationship of radar signal at \(VV\) -polarization and 23º incidence angle with SM. <xref ref-type="bibr" rid="R673">Sahebi <italic>et al.</italic> (2004)</xref> have used C-band with \(HH\) -polarization captured at 10°-12° incidence angle to minimise the roughness effect. <xref ref-type="bibr" rid="R621">Holah <italic>et al.</italic> (2005)</xref> have recommend low and medium incidence angles (20°-37°) as optimal parameter for SM estimations whereas the high-incidence angle (40°-43°) of ASAR images are the most suitable for roughness analysis with minimum influence of SM (<xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>). Therefore, SAR C-band images acquired at low (<xref ref-type="bibr" rid="R662">Patel and Srivastava, 2015</xref>) and medium incidence angle are suggested for the best SM estimations (<xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.,</italic> 2008</xref>). Various ranges as optimal incidence angle have been suggested for SM retrievals: 1) 10° to 20° (<xref ref-type="bibr" rid="R671">Romshoo and Musiake, 2004</xref>); 2) 10° to 17° (<xref ref-type="bibr" rid="R662">Patel and Srivastava, 2015</xref>), etc. However, <xref ref-type="bibr" rid="R612">Geng <italic>et al.</italic> (1996)</xref> have concluded that images captured at higher incidence angel gives larger difference between dry and wet soils for given polarisation. <xref ref-type="bibr" rid="R648">Moran <italic>et al.</italic> (2000)</xref> have noted importance of adjustment of topographic influence on local incidence angle. <xref ref-type="bibr" rid="R585">Bertoldi <italic>et al.</italic> (2014)</xref> have been used Standard Quad Polarization (\(HH\), \(HV\), \(VH\), \(VV\)) at mean incidence angle of 45 for SM retrievals over mountain area. <xref ref-type="bibr" rid="R615">Gorrab <italic>et al.</italic> (2015)</xref> have used TerraSAR-X image for mapping of bare soil surface parameters including SM.</p>
<p>Several studies have improved SM retrieval using SAR C<bold>-</bold>band images taken at two incident angles (<xref ref-type="bibr" rid="R573">Aubert <italic>et al.,</italic> 2013</xref>). <xref ref-type="bibr" rid="R712">Zribi and Dechambre (2003)</xref> have used \(P_{HH}\) polarization of C band (5.3 GHz) acquired at two incidence angle 23º and 39º with 3 days delay to estimate SM using duel<italic>-</italic>configured integral equation model. They have proved usefulness of space-borne RARDARSAT and ASAR-ENVISAT data captured using simultaneous dual incidence angle mode to characterize bare soil parameters. <xref ref-type="bibr" rid="R668">Rahman <italic>et al.</italic> (2008)</xref> have suggested the method depends on radar images captured from two different view angles with the repeat cycle of the satellite. Simultaneously acquiring images at multiple polarizations and two view angles are useful to eliminate the errors due to registration inaccuracy (<xref ref-type="bibr" rid="R668">Rahman <italic>et al.,</italic> 2008</xref>). Further, ratio of radar signals recorded at low to high incidence angle, \(\Delta \sigma ^{0} = \sigma_{26 ^{\circ} –28 ^{\circ}} \sigma_{50 ^{\circ} –52 ^{\circ}}\) decreases with surface roughness (<xref ref-type="bibr" rid="R575">Baghdadi <italic>et al</italic>., 2008</xref>). Co-polarization ratio increases with increasing incidence angle (Oh <italic>et al.,</italic> 1992).</p>
<p><xref ref-type="bibr" rid="R678">Santi <italic>et al.</italic> (2013)</xref> have used SAR data captured at various incidence angles (20° to 50°) for SM estimation using ANN. <xref ref-type="bibr" rid="R601">Das and Paul (2015)</xref> have used RISAT-1 signal with RH and RV configuration at high incident angle (48.11º) to analyse the behaviours of several soil conditions. Bai and He (2015) have not considered the effect of local incidence angle on the backscattered signal used for SM retrievals with help of Dubois model for the flat topography in prairie areas.</p>
</sec>
<sec id="s3-7"><title>3.2.4 Radiometric Calibration (RC)</title>
<p>Sensor calibration requires for reliable results of the SM retrievals using SAR (<xref ref-type="bibr" rid="R648">Moran <italic>et al.</italic>, 2000</xref>). <xref ref-type="bibr" rid="R612">Geng <italic>et al.</italic> (1996)</xref> have used Dobson method for relative calibration of single look, multi-polarized SAR image and reported 20% better results than non-calibrated data. <xref ref-type="bibr" rid="R633">Kelly <italic>et al.</italic> (2003)</xref> have reduced speckle using ‘adaptive Lee sigma filter’. Method suggested by <xref ref-type="bibr" rid="R640">Laur et al. (1996)</xref> has been widely used for calibration (14) of SAR data (<xref ref-type="bibr" rid="R681">Shoshany <italic>et al.,</italic> 2000</xref>; <xref ref-type="bibr" rid="R633">Kelly <italic>et al.,</italic> 2003</xref>; <xref ref-type="bibr" rid="R699">Walker <italic>et al.,</italic> 2003</xref>; <xref ref-type="bibr" rid="R632">Kaojarern <italic>et al</italic>., 2004</xref>; <xref ref-type="bibr" rid="R674">Said <italic>et al.,</italic> 2012</xref>; etc.).</p>
<p>\(\sigma ^{0}=DN^{2} \times \frac{1}{k}\frac{sinZ}{sinZ_{ref}}\) after <xref ref-type="bibr" rid="R699">Walker <italic>et al.</italic> (2003)</xref> (14)</p>
<p>where, \(k\) is the calibration constant, \(Z\) is the zenith angle for the pixel, and \(Z_{ref}\) is reference incidence angle.</p>
<p><xref ref-type="bibr" rid="R580">Bai <italic>et al.</italic> (2015)</xref> have used following equation (15) for radiometric calibration of TerraSAR-X image:</p>
<p>\(\sigma _{dB}^{0}=10~log_{10} \left[ \left( \vert k_{s} \vert ^{2}-NEBN \right) \times sin \left( \theta \right) \right]\) after <xref ref-type="bibr" rid="R580">Bai <italic>et al.</italic> (2015)</xref> (15)</p>
<p>\(\sigma ^{0}\) is backscattering coefficient, \(\theta\) is incidence angle, \(k_s\) is calibration coefficient. \(k_s\) depends on \(\theta\) and polarization. \(NEBN\) is noise equivalent beta naught, which interprets the noise contribution to the signals.</p>
<p>Scholars have been used algorithms developed by the German Aerospace Center (DLR) and the Italian Space Agency (ASI) for radiometric calibration of SAR images (<xref ref-type="bibr" rid="R617">Hajj <italic>et al.</italic>, 2016</xref>). Radiometric calibration transforms the DN to a radar backscattering coefficient (16) for COSMOSkyMed (CSK) data.</p>
<p>\(\sigma _{i}^{0}=K_s~ \cdot DN_{i}^{2} \cdot sin \left( \theta \right) -NESZ\) after <xref ref-type="bibr" rid="R617">Hajj <italic>et al.</italic> (2016)</xref> (16)</p>
<p>where, \(k_s\) is the calibration constant, \(\theta\) is the reference incidence angle, and \(NESZ\) is the Noise Equivalent Sigma Zero. Further, <xref ref-type="bibr" rid="R617">Hajj <italic>et al</italic>. (2016)</xref> have used following equation (17) for RC of CSK images</p>
<p>\(\sigma _{i}^{0}=DN_{i}^{2}~ \cdot ~\frac{1}{K~ \cdot F}~ \cdot sin \left( \theta \right) R_{ref}^{2~ \cdot R_{exp}}\)after <xref ref-type="bibr" rid="R617">Hajj <italic>et al.</italic> (2016)</xref> (17)</p>
<p>where,\(R_{ref}\) is the reference slant range, \(R_{exp}\) is the reference slant range exponent, \(K\) is the calibration constant, and \(F\) is the rescaling factor. They have averaged these values, \(\sigma _{i}^{0}\) at plot level i.e. grassland plots in decibel scale using following equation (18):</p>
<p>\(\sigma _{dB}^{0}=10~ \cdot log_{10} \left( \sum _{}^{} \sigma _{i}^{0} \right)\) after <xref ref-type="bibr" rid="R617">Hajj <italic>et al.</italic> (2016)</xref> (18)</p>
<p><xref ref-type="bibr" rid="R637">Kong and Dorling (2008)</xref> have used calibration procedure provided by data producer for calibration of ASAR data.</p>
<p>Topographic distortions are very difficult to remove from SAR image using calibration techniques because of layover and shadowing effects (<xref ref-type="bibr" rid="R585">Bertoldi <italic>et al., </italic>2014</xref>). It makes more complexities for SM retrievals. Backscatter response varies according to soil types needs calibrations for each textural class. Further, SM moisture data has been also used for calibration of models which required for inversion of radar images (<xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic>, 2006</xref>). Some scholars have used calibration curve prepared based on SM measurements according to soil types (<xref ref-type="bibr" rid="R588">Blumberg <italic>et al.,</italic> 2002</xref>). However, some scholars have developed techniques for SM estimations without prior knowledge about roughness parameters with the help of calibration approach (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2008</xref>). <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref> used calibration parameter dependent on roughness, the incidence angle (\(\theta\)), the polarization (\(P\)), and the radar frequency for replacement of in-situ SM data. Calibration based models are very sit-specific and not useful to extrapolate the SM for different bio-physical units. Thus, multiple frequency, - polarization, - incidence angle SAR images are suggested to remove surface roughness and vegetation effects from retrieved SM (<xref ref-type="bibr" rid="R590">Bourgeau<bold>-</bold>Chavez <italic>et al.</italic>, 2007</xref>).</p>
</sec>
<sec id="s3-8"><title>3.3 Surface Parameters</title>
<p>Radar backscatter has combined effect of: 1) surface conditions including slope, roughness, dielectric constant of the target e.g. SM and vegetation; and 2) radar configurations including frequency, polarization, incident angle (<xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>). The analysis of relationship between soil surface roughness and radar backscattering are important for precise SM estimations (<xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic>, 2015</xref>).</p>
</sec>
<sec id="s3-9"><title>3.3.1 Surface Roughness</title>
<p>Surface roughness, \(Z_s\) is a description of the irregularity (randomness) of the micro-topography of the earth surface (<xref ref-type="bibr" rid="R642">Li <italic>et al.,</italic> 2015</xref>). Roughness effect on radar backscatter is possibly equal to or greater than the effect of soil moisture (<xref ref-type="bibr" rid="R644">Lu and Meyer, 2002</xref>). Therefore, roughness parameterization is an important, crucial (<xref ref-type="bibr" rid="R660">Pant <italic>et al.,</italic> 2010</xref>) and problematic issue in SAR-based soil moisture retrievals (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2008</xref>). The input data about roughness parameters for backscattering modeling needs for precise estimations of SM over bare surface (<xref ref-type="bibr" rid="R714">Zribi <italic>et al.,</italic> 2005</xref>). It has been analyzed using two parameters: correlation length (\(l\)) and \(rms\) height (\(s\)) (<xref ref-type="bibr" rid="R660">Pant <italic>et al.,</italic> 2010</xref>). <xref ref-type="bibr" rid="R716">Zribi <italic>et al. </italic>(2006)</xref> have analyzed role of roughness in surface scattering model for heterogeneous terrains. \(Z_s\) simply described (19) as:</p>
<p>\(Z_{s}=s^{2}/l\) after <xref ref-type="bibr" rid="R712">Zribi and Dechambre (2003)</xref>, <xref ref-type="bibr" rid="R713">Zribi <italic>et al. </italic>(2006)</xref> 19)</p>
<p>The variation of a surface height relative to reference surface for random component can be described using the standard deviation of surface height (\(s\)) and the surface correlation length (\(l\)). \(Z_s\) is key parameter in volumetric and spatial estimations of the SM using MW backscatters data. Many researchers have determined \(Z_s\) parameters, \(\sigma\) = 0.3–3cm, cl. = 3–35cm.</p>
<p>Researchers have developed the methods of \(Z_s\) retrieval using: 1) microwave backscatters from vegetation canopy, 2) triangular prisms, and 3) surface roughness testing apparatus and the corresponding testing methods. Further, <xref ref-type="bibr" rid="R699">Walker <italic>et al.</italic> (2003)</xref> have reported four methods for physically measurement of roughness parameters (1 to 2m length of profile): “(i) inserting a thin metal plate vertically into the soil and spraying with paint from horizontal direction; (ii) taking a photograph of the intersection of the ground surface with a gridded plate and digitizing the intersection; (iii) using a panel with drop pins; and (iv) using a laser profiler”. However, calculations of the \(l\) and the standard deviation of a surface height based three-dimensional parameters for the surface requires large efforts computation (<xref ref-type="bibr" rid="R642">Li <italic>et al.,</italic> 2015</xref>). <xref ref-type="bibr" rid="R642">Li <italic>et al.</italic> (2015)</xref> have developed a GPU [Graphics Processing Unit]-based method to calculate the soil surface roughness parameters. Some scholars have used semi-empirical Water Cloud Model to eliminate the vegetation effects on the backscatter coefficient for SM estimations using, viz. <xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012)</xref> ERS-2 SAR images.</p>
<p>Long profiles are suggested for precise estimation of the roughness parameters (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2008</xref>) and direct measurement of roughness parameters over larger area is very time consuming and expensive (<xref ref-type="bibr" rid="R660">Pant <italic>et al.</italic>, 2010</xref>). Therefore, SAR estimations of roughness parameters are suggested and many empirical models are available for these estimations. Oh <italic>et al.</italic> (1992) have calculated the polarization ratios for analysis of bare soil surface: co-polarized ratio, \(\sigma _{HH}^{0}/ \sigma _{VV}^{0}\) and cross-polarized ratio, \(\sigma _{HV}^{0}/ \sigma _{VV}^{0}\). Co-polarized ratio increases with incidence angle and increasing soil moisture content whereas cross-polarized ratio show weak dependence with soil moisture content. Further, <xref ref-type="bibr" rid="R685">Srivastava <italic>et al.</italic> (2008</xref>) have used depolarization ratios for estimations of surface roughness (20) using polarized Envisat-1 ASAR data as:</p>
<p>\(\sigma _{VH}^{0}- \sigma _{VV}^{0}\) after <xref ref-type="bibr" rid="R685">Srivastava <italic>et al.</italic> (2008)</xref> (20)</p>
<p>They have shown <italic>rms</italic> height from SAR backscatter as scatterplots using linear regression analysis (21; 22) as:</p>
<p>\(rms~height=A+B^{*} \left( \sigma _{VV}^{0} \right)\)after <xref ref-type="bibr" rid="R685">Srivastava <italic>et al.</italic> (2008)</xref> (21)</p>
<p>\(rms~height=A+B^{*} \left( \sigma _{VH}^{0} \right)\)after <xref ref-type="bibr" rid="R685">Srivastava <italic>et al.</italic> (2008)</xref> (22)</p>
<p>It is good indicator of surface roughness derived from multi-polarized SAR data.</p>
<p>\(C_{r}= \left( 1-\frac{L_{2}}{L_{1}} \right) \times 10\) after <xref ref-type="bibr" rid="R601">Das and Paul (2015)</xref> (23)</p>
<p>where, \(C_r\) is roughness at any direction; \(L_1\) is the length of roller chain; and \(L_2\) is linear distance of chain due to roughness. Surface roughness using single SAR image of single band (C-band or X-band) can be represented (24) as:</p>
<p>\(\sigma =f \left( V_{sm}, \lambda \right) \Longrightarrow V_{sm}=f^{&apos;} \left( \sigma \right)\) after <xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic> (2016)</xref> (24)</p>
<p>where, \(\sigma\) is backscatter coefficient. Combined use of two bands of SAR images can eliminate the effect of surface roughness and establish relationship of \(\sigma\) with volumetric SM. Zhang <italic>et al.</italic> (2016) have combined two SAR C- and X-bands using (25):</p>
<p>\(\begin{equation} \left.\begin{aligned} \sigma _{c}=f_{1} \left( V_{sm}, \lambda _{c} \right) \\ \sigma _{x}=f_{2} \left( V_{sm}, \lambda _{x} \right) \\ \end{aligned} \right\} {\implies} \ m_{v}=f^{&apos;} \left( \sigma _{c}, \sigma _{x} \right) \end{equation}\)after <xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic> (2016)</xref> (25)</p>
<p>Contribution of SAR backscatter for a vegetation cover depends upon the vegetation volume, dielectric and structure of the vegetation constituents as well as the frequency, polarization and incidence angle of the MW (<xref ref-type="bibr" rid="R686">Srivastava <italic>et al.,</italic> 2015</xref>; <xref ref-type="bibr" rid="R617">Hajj <italic>et al.,</italic> 2016</xref>). Many models are available for roughness estimations, however, no explicit model available for precise estimations. They are very site specific and confined to the study area. The radar-perceived roughness is a combination of surface and subsurface roughness.</p>
</sec>
<sec id="s3-10"><title>3.3.2 Surface Correlation Length (\(l\))</title>
<p>Correlation length of surface provides reference to estimate the statistical independence of two points (<xref ref-type="bibr" rid="R642">Li <italic>et al.,</italic> 2015</xref>). Accuracy of SM estimation using IEM model depends on measurements of correlation length (<xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.,</italic> 2006</xref>). However, measuring correlation length is pragmatic and difficult to interpret (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2008</xref>). The values are varied and depend on the length of transect and increasing with increasing profile length.</p>
<p>The correlation coefficient for radar detected scattering values spread over a 2D area can be calculated (26):</p>
<p>\(\sigma \left( j \right) =\frac{ \sum _{i=1,~k=1}^{M} \left( z_{i}-z_{i} \right) \left( z_{k}-z_{k} \right) }{ \sum _{i=1,}^{M} \left( z_{i}-z_{i} \right) } \vert \sqrt[]{ \left( x_{i}-x_{k} \right) ^{2}- \left( y_{i}-y_{k} \right) ^{2}} \epsilon \left( j-0.5,~j+0.5 \right)\)after <xref ref-type="bibr" rid="R642">Li <italic>et al.</italic> (2015)</xref> (26)</p>
<p>where, \(j\) is the value gives to calculate the different correlation coefficients. <xref ref-type="bibr" rid="R642">Li <italic>et al.</italic> (2015)</xref> have recommended this method for calculation of the soil backward scattering coefficient using Advanced Integrated Equation Model (AIEM) of microwaves for ground detection.</p>
<p>Smoother profiles need longer profiles for the estimation of the correlation length (<xref ref-type="bibr" rid="R595">Callens <italic>et al</italic>., 2006</xref>). <italic>rms</italic> height does not decrease with increasing profile length therefore many profiles required to get precise estimations of the average correlation length.</p>
</sec>
<sec id="s3-11"><title>3.3.3 Autocorrelation Function (ACF)</title>
<p>Autocorrelation function for lags, \(\xi =j \Delta x \) (\(\Delta x \) is spatial resolution of the profile) of surface height is one of the surface roughness parameters (<xref ref-type="bibr" rid="R582">Barrett <italic>et al.</italic>, 2009</xref>). Analytical models based on physical approximations require knowledge of the autocorrelation function (<xref ref-type="bibr" rid="R694">Vannier and Taconet, 2014</xref>). Bi-dimensional autocorrelation function more appropriate to characterize bare soil agricultural surfaces for multi-scale processes (<xref ref-type="bibr" rid="R694">Vannier and Taconet, 2014</xref>).</p>
<p>The Gaussian and exponential autocorrelation function have been widely used backscattering models for SM retrievals (<xref ref-type="bibr" rid="R595">Callens <italic>et al.,</italic> 2006</xref>):</p>
<p>Gaussian function (27):</p>
<p>\(ACF \left( \xi \right) =e^{- \vert \xi \vert /l}\) after <xref ref-type="bibr" rid="R696">Verhoest <italic>et al.</italic> (2009)</xref> (27)</p>
<p>Exponential autocorrelation function:</p>
<p>\(ACF \left( \xi \right) =e^{- \xi ^{2}/l}\) after <xref ref-type="bibr" rid="R696">Verhoest <italic>et al.</italic> (2009)</xref> (28)</p>
<p>Exponential ACF shows smaller correlations at small lags than Gaussian function (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2009</xref>) therefore, Baghdadi <italic>et al.</italic> (2015) found better SM simulation with exponential autocorrelation function than with Gaussian function. Gaussian and exponential ACF differently describe the surface according to lags and correlation length. Gaussian ACF shows a smoother surface than the exponential for lags smaller than correlation length (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2009</xref>). The shorter the ACF indicates the smaller the correlation length (<xref ref-type="bibr" rid="R595">Callens <italic>et al.</italic>, 2006</xref>). Exponential function produces ACF close to natural soils and Gaussian ACF to rougher surfaces (<xref ref-type="bibr" rid="R595">Callens <italic>et al.</italic>, 2006</xref>). Therefore, <xref ref-type="bibr" rid="R628">Ji <italic>et al.</italic> (1996)</xref> have used hybrid, Gauss-Exp function product of Gaussian and exponential ACF reported as a suitable model. <xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.</italic> (2008)</xref> have computed <italic>rms</italic> surface height and correlation length for each training field using the mean of the autocorrelation function (<xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.</italic>, 2008</xref>). Use of ACF is replacing to correlation length to reduce the number (2 instead of 4) of parameters required for characterization of agricultural bare soils. Wet surface shows spatial autocorrelation in the variogram (<xref ref-type="bibr" rid="R633">Kelly <italic>et al.,</italic> 2003</xref>). IEM needs knowledge about the shape of the autocorrelation function (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2009</xref>). However, backscattering coefficient estimated using unsuitable ACF leads to errors (Baghdadi <italic>et al.</italic>, 2015). High degree of temporal autocorrelation gives better results of SM estimation using PCA (<xref ref-type="bibr" rid="R671">Romshoo and Musiake, 2004</xref>). <xref ref-type="bibr" rid="R641">Li <italic>et al.</italic>, (2002)</xref> introduced a power law for both models.</p>
</sec>
<sec id="s3-12"><title>3.3.4 Surface \(rms\) Height</title>
<p>backscattering coefficient, \(\sigma ^{0}\) have relationship with <italic>rms</italic> height (<xref ref-type="bibr" rid="R684">Sonobe <italic>et al.,</italic> 2008</xref>). Energy reflected back to the radar increases with increasing roughness therefore, larger <italic>rms</italic> height indicates more energy reflected back and backscattering coefficient (<xref ref-type="bibr" rid="R649">Narayanan and Hegde, 2000</xref>). <xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic> (2016)</xref> have used <italic>rms</italic> height to replace the surface roughness parameter in a linear regression model. <italic>rms</italic> height is a dimensionless form of the projected roughness on the wave incident plane (<xref ref-type="bibr" rid="R671">Romshoo and Musiake, 2004</xref>).</p>
<p>Standard deviation of a surface height can be expressed (29) as:</p>
<p>\(\sigma = {\left( {\bar{Z}}^{2}-z^{2} \right) ^{\frac{1}{2}}}= [\frac{1}{N-1} (\sum_{i=1}^2(Z_i)^2)-N(\bar{Z})^2]^{\frac{1}{2}}\) after <xref ref-type="bibr" rid="R642">Li <italic>et al.</italic> (2015)</xref> (29)</p>
<p>where, \(z=\frac{1}{N} \sum _{i=1}^{N}z_{i}\)and \(N\) is the number of samples. Height at a point \((x, y)\) is \(z(x, y)\) and \(z\) can be expressed with dimensions \(L_x\) and \(L_y\). Mean height (30) of the surface is:</p>
<p>\(z=\frac{1}{L_{x}L_{y}} \int _{L_{x}/2}^{L_{x}/2} \int _{L_{y}/2}^{L_{y}/2} z \left( x,~y \right) dx~dy\)after <xref ref-type="bibr" rid="R642">Li <italic>et al.</italic> (2015)</xref> (30)</p>
<p>and the second (31) is.,</p>
<p>\({\bar{z}}^2=\frac{1}{L_{x}L_{y}} \int _{L_{x}/2}^{L_{x}/2} \int _{L_{y}/2}^{L_{y}/2} {\bar{z}}^2 \left( x,~y \right) dx~dy\)after <xref ref-type="bibr" rid="R642">Li <italic>et al.</italic> (2015)</xref> (31)</p>
</sec>
<sec id="s3-13"><title>3.3.5 Surface Correlation Length (SCL)</title>
<p>Surface roughness can be represented by the standard deviation in surface height and surface correlation length (SCL). SCL indicates the surface smoothness and variations therefore, the backscattering coefficient decreases with increase in SCL (<xref ref-type="bibr" rid="R649">Narayanan and Hegde, 2000</xref>).</p>
<p><xref ref-type="bibr" rid="R696">Verhoest <italic>et al.</italic> (2008)</xref> have reported that several studies were undertaken to improve the roughness characterisation, assess errors and estimating scaling behaviour of the roughness parameters. <xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.</italic> (2011)</xref> have used \(HV/VV\) ratio for assessment of \(rms\) height of soil surface roughness. However, comprehensive assessment needs for analysis of impact of roughness problems on the SM retrieval (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2008</xref>).</p>
</sec>
<sec id="s3-14"><title>3.4 Backscattering Coefficient</title>
<p>The backscattering coefficient, \(\sigma ^{ {0} }\) of soil represents the relationships between soil properties and the scatterometer responses (<xref ref-type="bibr" rid="R679">Schmugge, 1976</xref>). Scattering coefficient of bare soil is a function of soil surface roughness (<xref ref-type="bibr" rid="R684">Sonobe <italic>et al.,</italic> 2008</xref>) and dielectric properties. It is the function for soil texture, structure, density, roughness (surface \(rms\) height), SM, and soil surface conditions (<xref ref-type="bibr" rid="R683">Song <italic>et al.,</italic> 2009</xref>). Therefore, it shows better agreements with measured SM and useful for SM estimations using different models (<xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>; Baghdadi <italic>et al.</italic>, 2015). Soil dielectric constant can be calculated directly from the \(\sigma ^{ {0} }\) (<xref ref-type="bibr" rid="R683">Song <italic>et al.,</italic> 2009</xref>). \(\sigma ^{ {0} }\) observes low and stable during dry season and increases with increasing SM and vegetation development (<xref ref-type="bibr" rid="R625">Jarlan <italic>et al.,</italic> 2003</xref>; <xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>). Radar signals from very wet soils (SM 32% to 41%) observed up to 4dB (<xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.,</italic> 2008</xref>) and higher \(\sigma ^{ {0} }\) observed for ploughed fields due to high surface roughness (<xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.,</italic> 2008</xref>). Biomass makes complexity and increases uncertainty in radar backscattering (<xref ref-type="bibr" rid="R600">Das <italic>et al.,</italic> 2008</xref>).</p>
<p>\(\sigma ^{ {0} }\) shows linear relationship (32) with SM as:</p>
<p>\(\sigma ^{{0} }=A+B \dot \ W\) after <xref ref-type="bibr" rid="R601">Das and Paul (2015)</xref> (32)</p>
<p>where \(A\) is the \(\sigma ^{ {0} }\) of a completely dry soil surface and \(B\) is the sensitivity of \(\sigma ^{ {0} }\) to change with the surface SM content.</p>
<p>Scholars have studied the variations of \(\sigma ^{ {0} }\) with SM, surface roughness, incidence angle and observation frequency (<xref ref-type="bibr" rid="R679">Schmugge, 1976</xref>). <xref ref-type="bibr" rid="R684">Sonobe <italic>et al.</italic> (2008)</xref> and <xref ref-type="bibr" rid="R623">Huang <italic>et al.</italic> (2010)</xref> have reported relationship of \(\sigma ^{ {0} }\) with \(rms\) height. Greater difference between backscattering signals from smooth and rough fields observed at high incidence angles (<xref ref-type="bibr" rid="R575">Baghdadi <italic>et al.,</italic> 2008</xref>). However, \(\sigma ^{ {0} }\) positively correlates with SM content (<xref ref-type="bibr" rid="R686">Srivastava <italic>et al.,</italic> 2015</xref>). <xref ref-type="bibr" rid="R681">Shoshany<italic> et al.</italic> (2000)</xref> have used method of Laur <italic>et al</italic>. (1997) to get the backscattering coefficient (\(\sigma ^{ {0} }\)) (33) in dB from DN of the ERS-2 SAR (PRI) image:</p>
<p>\(\sigma ^{ ^{0} }= \lfloor \frac{1}{N} \sum _{ij=1}^{ij=N}DN_{ij}^{2} \rfloor \frac{1}{k}c \left( \frac{sin \alpha }{sin \alpha _{ref}} \right)\)after <xref ref-type="bibr" rid="R681">Shoshany <italic>et al.</italic> (2000)</xref> (33)</p>
<p>where, \(N\) is the number of pixels, \(c\) is accounts for updating the gain due to the elevation antenna pattern implemented in ERSSAR PRI data processing, \(a\) and \(a_{ref}\) are the average and reference incidence angles, respectively, and \(k\) is the empirical calibration constant. Further, <xref ref-type="bibr" rid="R681">Shoshany <italic>et al.</italic> (2000)</xref> have used adjusted backscatter according to the local angle of incidence DEM (34):</p>
<p>\(\sigma ^{ {0} }=~ \sigma ^{ {0} }cos \theta _{i}\)</p>
<p>\(=\sigma ^{0} ( cos \theta _{n} cos \theta _{z} + sin \theta _{n}sin \theta _{z}cos \varnothing _{z}cos \varnothing _{n}+sin \theta _{z}sin \varnothing _{z}sin \theta _{n}sin \varnothing _{n})\) <xref ref-type="bibr" rid="R681">Shoshany <italic>et al.</italic> (2000)</xref> (34)</p>
<p>where, \(\theta _{z}\) and \(\varnothing _{z}\) are the zenith and azimuth angles of the source, \(\theta _{n}\) and \(\varnothing _{n}\) are the zenith and azimuth angles of the normal to the surface, \(\sigma ^{ {0} }\) is backscatter from a unit area perpendicular to the beam measured on the surface of the Earth and \(\theta _{i}\) is the angle between the direct radiation and the surface normal. Accurate co-registration of image to the DEM with root mean error at less than one pixel required for calculating the local angle of incidence for each SAR pixel.</p>
<p><xref ref-type="bibr" rid="R649">Narayanan and Hegde (2000)</xref> have established the empirical model using ‘Physical Optics Model’ and ‘Geometric Optics Model’ of <xref ref-type="bibr" rid="R690">Ulaby <italic>et al</italic>. (1982)</xref> to calculate co-polarized backscattering coefficients (35; 36) as:</p>
<p>\(\sigma _{VV}^{0} \left( \theta \right) =g\sqrt[]{q}cos^{3} \theta \left[ \Gamma _{V} \left( \theta \right) + \Gamma _{H} \left( \theta \right) \right]\) after <xref ref-type="bibr" rid="R649">Narayanan and Hegde (2000)</xref> (35)</p>
<p>\(\sigma _{HH}^{0} \left( \theta \right) =\frac{gcos^{3} \theta }{\sqrt[]{q}} \left[ \Gamma _{V} \left( \theta \right) + \Gamma _{H} \left( \theta \right) \right]\)after <xref ref-type="bibr" rid="R649">Narayanan and Hegde (2000)</xref> (36)</p>
<p>where,</p>
<p>\(g=0.7 \left[ 1-exp \left( -0.65 \left( ks \right) ^{1.8} \right) \right]\)</p>
<p>and</p>
<p>\(q= \left[ 1- \left( \frac{2 \theta }{ \pi } \right) ^{\frac{1}{3 \Gamma \left( ο \right) }} \right] ^{2}\)</p>
<p>where, \(\theta \) is the incident angle, \(\Gamma _{V,~H}\) is the Fresnel reflection coefficient for \(p\), \(k\) is the wave number and \(s\) is the \(rms\) height of the surface. The effect of correlation length of the surface is not considered in this model. Fresnel reflection coefficient (37) is:</p>
<p>\(\Gamma = \vert \frac{\sqrt[]{ \varepsilon _{r}-1}}{\sqrt[]{ \varepsilon _{r}+1}} \vert ^{2}\) (37)</p>
<p>Further, backscattering coefficient at \(HH\) -polarization (38) can be expressed (<xref ref-type="bibr" rid="R602">Das <italic>et al.,</italic> 2008</xref>) as:</p>
<p>\(\sigma _{HH}^{s}=10^{2.75} \left( \frac{cos^{1.5} \theta }{sin^{5} \theta } \right) 10^{0.028 \varepsilon ^{&apos;}tan \theta } \left( ks*sin \theta \right) ^{1.4} \lambda ^{0.7}\) after <xref ref-type="bibr" rid="R602">Das <italic>et al.</italic> (2008)</xref> (38)</p>
<p>and at \(VV\) polarization (39):</p>
<p>\(\sigma _{VV}^{s}=10^{2.35} \left( \frac{cos^{3} \theta }{sin^{3} \theta } \right) 10^{0.046 \varepsilon ^{&apos;}tan \theta } \left( ks*sin \theta \right) ^{1.1} \lambda ^{0.7}\) after <xref ref-type="bibr" rid="R602">Das <italic>et al.</italic> (2008)</xref> (39)</p>
<p>where, \(\theta \) is radar incidence angle<bold>, </bold> \(\lambda\) (cm) is the wavelength, \(k\) is the wave number, \(s\) is the surface \(rms\) height, and \(\varepsilon\) is the real part of the dielectric constant. <xref ref-type="bibr" rid="R623">Huang <italic>et al.</italic> (2010)</xref> have reported variation of <italic>rms</italic> height estimated for \(\sigma _{HH}^{s}\) and \(\sigma _{VV}^{s}\). \(\sigma _{HH}^{s}\) increases with increasing \(rms\) height faster than \(\sigma _{VV}^{s}\) (<xref ref-type="bibr" rid="R623">Huang <italic>et al.,</italic> 2010</xref>). Baup <italic>et al</italic>. (2007) have reported strong relationship of \(\sigma _{HH}^{s}\) with surface SM. Co-polarized backscatters from the land surface is the product (40) of three components (<xref ref-type="bibr" rid="R608">Entekhabi <italic>et al.,</italic> 2010</xref>) i.e. 1) the surface backscatter, \(\sigma _{PP}^{s}\) modified by the two-way attenuation through a vegetation layer of nadir opacity, \(\tau_{p}\), 2) the backscatter from the vegetation volume, \(\sigma _{PP}^{Vol}\), and 3) interactions between vegetation and the soil surface, \(\sigma _{PP}^{int}\).</p>
<p>\(\sigma _{PP}^{t}= \sigma _{PP}^{s}exp \left( -2 \tau_{p}sec \theta \right) + \sigma _{PP}^{Vol}+ \sigma _{PP}^{int}\) after <xref ref-type="bibr" rid="R608">Entekhabi <italic>et al. </italic>(2010)</xref> (40)</p>
<p><xref ref-type="bibr" rid="R602">Das <italic>et al.</italic> (2008)</xref> have proposed the equation for co-polarized radar backscattering specific region for a particular day (\(x\)) to involve dynamic nature of radar backscattering in SM estimations (41) as:</p>
<p>\(\sigma _{x}^{t}= \sigma _{x}^{s} \left( -\frac{2 \tau_{0}}{cos \theta } \right) + \sigma _{x}^{v}+ \sigma _{x}^{sv}\) after <xref ref-type="bibr" rid="R602">Das <italic>et al. </italic> (2008)</xref> (41)</p>
<p>where, \(x=1... n\), is daily data within the study period \(t\).</p>
<p>Cross-polarized backscattering coefficient, \(\sigma _{HP}^{0}\) have increasing and decreasing relationship with vegetation water content and crop height (<xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.,</italic> 2011</xref>). Cross-polarized \(\sigma ^{ {0} }\) is less sensitive than co-polarized \(\sigma ^{ {0} }\) to SM content (<xref ref-type="bibr" rid="R582">Barrett <italic>et al.,</italic> 2009</xref>).</p>
<p>Simulated radar backscattering coefficient from the radar signals in models like IEM presents the incidence angle, polarization, soil <italic>rms</italic> surface height, soil correlation length, the ACF, and soil dielectric constant (Baghdadi <italic>et al.</italic>, 2015). However, inversion process is highly required to determine SM from \(\sigma ^{ {0} }\) (<xref ref-type="bibr" rid="R683">Song <italic>et al</italic>., 2009</xref>). Errors in \(\sigma ^{ {0} }\) affects the accuracy the SM retrievals and increases nonlinearly. <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref> have simulated the \(\sigma ^{ {\circ} }\) from the calibrated IEM model for precise estimations of SM.</p>
</sec>
<sec id="s3-15"><title>3.5 Discrete Scatter Microwave Model</title>
<p>Vegetation canopy (leaves, branches, trunks, etc.) represents discrete scattering due to high moisture content and absorbs the elements of radar transmitted MWs (<xref ref-type="bibr" rid="R663">Patel <italic>et al.,</italic> 2006</xref>). It is useful for more realistic analysis of canopy (<xref ref-type="bibr" rid="R589">Bosisio <italic>et al.,</italic> 2004</xref>). Therefore, discrete scatter microwave model is useful for determination of attenuation and scattering from vegetation. It has been successfully applied for microwave studies of forest, grass and different crops like Soybeans, Crone, etc. (<xref ref-type="bibr" rid="R596">Chauhan, 1997</xref>). Backscatter Coefficient, \(\sigma ^{ {0} }\) can be calculated (42) as:</p>
<p>\(\sigma ^{0}= \sigma _{d}^{0}+ \sigma _{dr}^{0}+ \sigma _{r}^{0}+ \sigma _{s}^{0}\) after <xref ref-type="bibr" rid="R596">Chauhan (1997)</xref> (42)</p>
<p>where, \(\sigma _{d}^{0},~ \sigma _{dr}^{0},~ \sigma _{r}^{0}\) and \(\sigma _{s}^{0}\) are the direct, direct-reflected, reflected and surface backscatter coefficients, respectively. Further, <xref ref-type="bibr" rid="R634">Kim <italic>et al.</italic> (2010)</xref> have also successfully used this model for SM analysis using radar scattering at L-band.</p>
</sec>
<sec id="s3-16"><title>3.6 Scattering Cross-Section</title>
<p>Scholars e.g. <xref ref-type="bibr" rid="R602">Das <italic>et al.</italic> (2008)</xref>, <xref ref-type="bibr" rid="R666">Piles <italic>et al.</italic> (2015)</xref> have described scarpering cross-section into three terms: 1) first represents the soil surface, the function of complex number (\( e_{s}=e_{s}^{&apos;}+je_{s}^{&quot;} \)) and roughness which be modified by the two way vegetation attenuation; 2) vegetation volume; and 3) between soil and vegetation which depends on \(e_{s} \), soil roughness characteristics, and vegetation canopy in complex ways. The radar backscatter for a vegetation-covered soil layer can be expressed as following equation (43) for \(HH\) and \(VV\) polarizations,</p>
<p>\(\sigma ^{t}= \sigma ^{s}exp \left( -\frac{2 \tau_{0}}{cos \theta } \right) + \sigma ^{V}+ \sigma ^{SV}\) after <xref ref-type="bibr" rid="R602">Das <italic>et al.</italic> (2008)</xref> (43)</p>
<p>where, \(\sigma ^{t}\) is the total radar scattering cross-section, \(\sigma ^{s}\) is the scattering contribution of the soil surface modified by the two-way vegetation attenuation, \(\sigma ^{V}\) is the scattering cross-section of the vegetation volume and \(\sigma ^{SV}\) represents the multiple scattering interaction between the soil and vegetation (<xref ref-type="bibr" rid="R602">Das <italic>et al.,</italic> 2008</xref>).</p>
</sec>
</sec>
<sec id="s4"><title>Synthetic Aperture Radar (Sar)</title>
<p>Backscattering signals measured using SAR are affected by land surface characteristics i.e. the soil surface roughness, dielectric constant of the soil and the physical and geometrical properties of vegetation- water content, size, shape, orientation, etc. (<xref ref-type="bibr" rid="R576">Du <italic>et al.,</italic> 2010</xref>). Radar backscatter will increase with SM or soil dielectric values if the soil surface roughness and vegetation conditions remain the same. Reported advances of SAR (<xref ref-type="bibr" rid="R605">Du <italic>et al.,</italic> 2010</xref>) are: (a) measuring SM for bare soil quantitatively using dual-polarization L-band or three-polarization, (b) correcting the effects of surface roughness based on multi-incidence angle (c) correcting vegetation effects by a combining SAR data with optical observations, (d) estimating SM change using repeat observations, (e) estimating SM with the introducing of prior knowledge of SM, and (f) a combination of high spatial-resolution observations from active microwave sensors and coarse observations from passive microwave sensors.</p>
<p>SM can be retrieved from the radar backscattering coefficient based on established relationships between the volumetric water content and for all combinations of surface conditions (roughness and vegetation cover) and radar configurations (frequency, polarization, incident angle) <xref ref-type="bibr" rid="R637">Kong and Dorling, (2008)</xref>. Multi-incidence angle, multi-polarization and multi-frequency SAR data have been suggested to overcome environmental complexities to estimate the SM (<xref ref-type="bibr" rid="R710">Zhang <italic>et al</italic>., 2016</xref>). SAR sensors (<xref ref-type="table" rid="T48">Table 1</xref>) launched in recent decades provide data with this compatibilities and relatively higher resolutions.</p>
</sec>
<sec id="s5"><title>In-Situ Measurements</title>
<p>Majority of studies have been used conventional techniques for measurements of SM and surface roughness for estimations of SM using active microwave based models.</p>
<sec id="s5-1"><title>5.1 Soil Moisture Measurements</title>
<p>Several studies have been compared the estimated SM using active microwave sensors with field measurements for data calibration and validation of the results (<xref ref-type="bibr" rid="R681">Shoshany <italic>et al.,</italic> 2000</xref>; <xref ref-type="bibr" rid="R633">Kelly <italic>et al.</italic>, 2003</xref>). Many scholars have measured SM from the upper soil layers: 0-5cm (i.e. <xref ref-type="bibr" rid="R712">Zribi and Dechambre, 2003</xref>; <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.,</italic> 2006</xref>; <xref ref-type="bibr" rid="R668">Rahman <italic>et al.,</italic> 2008</xref>; <xref ref-type="bibr" rid="R715">Zribi <italic>et al.,</italic> 2011</xref>; <xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>; <xref ref-type="bibr" rid="R585">Bertoldi <italic>et al.</italic>, 2014</xref>, etc.) and 0-10cm (<xref ref-type="bibr" rid="R681">Shoshany <italic>et al., </italic>2000</xref>; <xref ref-type="bibr" rid="R632">Kaojarern <italic>et al.,</italic> 2004</xref>; <xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.,</italic> 2008</xref>; <xref ref-type="bibr" rid="R613">Gharechelou <italic>et al.,</italic> 2015</xref>, etc.). However, scholars <xref ref-type="bibr" rid="R588">like Blumberg <italic>et al.</italic> (2002)</xref>, <xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.</italic> (2008)</xref> have collected sample readings from soil profiles at i.e. 5, 15, 30, 45 and 60cm (<xref ref-type="bibr" rid="R588">Blumberg <italic>et al.</italic> 2002</xref>). <xref ref-type="bibr" rid="R610">Filion <italic>et al.</italic> (2016)</xref> have measured SM at two depths (0-5 and 5-10cm) using the gravimetric method and the TDR probe. <xref ref-type="bibr" rid="R658">Paloscia <italic>et al.</italic> (2010)</xref> have collected soil samples from soil layer of 10-20cm.</p>
<p><xref ref-type="bibr" rid="R681">Shoshany <italic>et al. </italic>(2000)</xref> and <xref ref-type="bibr" rid="R613">Gharechelou <italic>et al.</italic> (2015)</xref> have collected soil samples from soil layer of 10cm of homogeneous terrain. Further, <xref ref-type="bibr" rid="R585">Bertoldi et al. (2014)</xref> have collected soil readings from top soil layer (0-5cm) over mountainous area of South Tyrol, Italy. <xref ref-type="bibr" rid="R668">Rahman <italic>et al.</italic> (2008)</xref> have focused on two most dominant soil types in the region for measurement of SM. <xref ref-type="bibr" rid="R661">Pasolli <italic>et al.</italic> (2014)</xref> have collected 200 samples from wide range of dry pastures areas (5%) to wet, recently irrigated (63%). Thus, scholars have decided the soil samples based on terrain, surface homogeneity, soil type, soil wetness, etc.</p>
<p>Many researchers have used calibrated Time Domain Reflectometry (TDR) probe for collection of soil samples from well distributed points within the study area (<xref ref-type="bibr" rid="R632">Kaojarern <italic>et al.,</italic> 2004</xref>; <xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.,</italic> 2008</xref>; <xref ref-type="bibr" rid="R658">Paloscia <italic>et al.,</italic> 2010</xref>; <xref ref-type="bibr" rid="R661">Pasolli e<italic>t al.,</italic> 2014</xref>; <xref ref-type="bibr" rid="R617">Hajj <italic>et al</italic>., 2016</xref>, etc.). <xref ref-type="bibr" rid="R590">Bourgeau-Chavez <italic>et al.</italic> (2007)</xref> have measured SM from top soils (6cm) using a water content reflectometer within 24 hours from radar satellite overpassed over burn land of Alaska. Scholars like <xref ref-type="bibr" rid="R681">Shoshany <italic>et al. </italic>(2000)</xref> and <xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic> (2016)</xref> have used GPS to locate soil samples within the satellite overpasses and link to the SAR pixels. <xref ref-type="bibr" rid="R681">Shoshany <italic>et al. </italic>(2000)</xref> have estimated Gravimetric SM using ‘double weight’ method of <xref ref-type="bibr" rid="R669">Rowell (1994)</xref> and converted into volumetric SM (%).</p>
<p>Gravimetric residual moisture method and volumetric moisture content have been widely used for SM measurements. Gravimetric SM (mg) values were estimated using laboratory analysis and converted into volumetric SM, \(V_{sm} \) (44):</p>
<p>\(V_{sm}=mg \times sbd \) after <xref ref-type="bibr" rid="R601">Das and Paul (2015)</xref> (44)</p>
<p>where, \(sbd\) multiplying bulk density.</p>
<p>Further, <xref ref-type="bibr" rid="R646">Mohan<italic> et al.</italic> (2015)</xref> have estimated gravimetric SM, \( G_{SM}\) (45) as:</p>
<p>\(G_{SM}=\frac{M_{water}}{M_{soil}} = [ \frac {{W_{wet}-W_{dry}}} {{W_{dry}}}]\) after <xref ref-type="bibr" rid="R646">Mohan<italic> et al.</italic> (2015)</xref> (45)</p>
<p>Volumetric soil moisture in profile can be calculated using simple formula (46):</p>
<p>\(Wet ~weight–Dry~weight /height\) after <xref ref-type="bibr" rid="R632">Kaojarern <italic>et al.</italic> (2004)</xref> (46)</p>
<p>Further, <xref ref-type="bibr" rid="R646">Mohan<italic> et al.</italic> (2015)</xref> have used following equation (47) for estimation of volumetric SM, \(V_{sm}\) as:</p>
<p>\(V_{sm}=\frac{volume~of~water}{total~volume}\) after <xref ref-type="bibr" rid="R646">Mohan<italic> et al.</italic> (2015)</xref> (47)</p>
<p>He used this equation to establish Topp’s Equation.</p>
<p>Volumetric SM can be estimated using simple technique (48) as:</p>
<p>\(V_{sm}= \left[ \frac{W_{wet}-W_{dry}}{W_{dry}} \right] P_{b}\) after <xref ref-type="bibr" rid="R621">Holah <italic>et al.</italic> (2005)</xref> (48)</p>
<p>where, \(W_{wet}\) and \(W_{dry}\) are the weights of wet and dry sample, respectively; \(P_b\) is bulk density.</p>
</sec>
<sec id="s5-2"><title>5.2 Roughness Measurement</title>
<p>Soil roughness and vegetation optical depth are significant effects to retrieve SM using L-band radiometric observations (<xref ref-type="bibr" rid="R609">Fernandez<bold>-</bold>Moran, 2015</xref>). SAR backscattering coefficient of soil surface depends on characteristics of surface roughness and SM (<xref ref-type="bibr" rid="R712">Zribi and Dechambre, 2003</xref>). Quantification of roughness effects on backscattering is important for precise SM estimations using SAR data (<xref ref-type="bibr" rid="R704">Wang <italic>et al.</italic>, 2015</xref>). The vegetation optical thickness and the soil roughness play an important role in simulating microwave brightness temperature in a Radiative Transfer Model (<xref ref-type="bibr" rid="R629">Jia <italic>et al.,</italic> 2009</xref>). Multi-angular of ASCAT observations are useful for correction of vegetation effects in SM estimations (<xref ref-type="bibr" rid="R603">Djamai <italic>et al.,</italic> 2015</xref>)</p>
<p>Scholars have used laser profilometer (<xref ref-type="bibr" rid="R712">Zribi and Dechambre, 2003</xref>), Pin profiler (<xref ref-type="bibr" rid="R714">Zribi <italic>et al.,</italic> 2005</xref>; <xref ref-type="bibr" rid="R668">Rahman <italic>et al.,</italic> 2008</xref>) and needle profilemeter (<xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.,</italic> 2006</xref>; <xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.,</italic> 2008</xref>; <xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic>, 2016</xref>), for soil roughness measurements. <xref ref-type="bibr" rid="R712">Zribi and Dechambre (2003)</xref> have measured roughness using a laser profilometer (transect: 1.6m; spatial resolution: 2mm) or pin-profiler (total length: 1; spatial resolution: 5mm and total length: 1; spatial resolution: 10mm). <xref ref-type="bibr" rid="R714">Zribi <italic>et al</italic>. (2005)</xref> have used Pin profiler (total length: 2m and resolution: 1cm) for roughness measurements for 10 profiles for each field. <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref> have measured soil roughness using 2m long needle profile meter with 1cm sampling interval at 10 roughness profiles for calculation of \(rms\) surface height and correlation length based on mean of all experimental correlation functions i.e. parallel and perpendicular. <xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.</italic> (2008)</xref> have measured the surface roughness using a 1m long needle profile meter with an interval of 2cm distributed within the tillage classes: Rolled vegetables, Rolled cereal, Cereal, etc. <xref ref-type="bibr" rid="R668">Rahman <italic>et al.</italic> (2008)</xref> have used pin meter of 3m profile length to measure surface roughness for the 13 sample sites and traced the surface height variation at 1cm intervals and the trace documented in a digital photograph. <xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic> (2016)</xref> have measured roughness parameter needle profiler and digital camera. Matlabprogram has been used to calculate \(rms\) height and correlation length. <xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.</italic> (2011)</xref> have used 3m profile pin mete to measure soil surface roughness.</p>
<p>Sensitivity varies with roughness parameters like from low to high vegetation and from smooth to rough bare soils (<xref ref-type="bibr" rid="R651">Narvekar <italic>et al., </italic>2015</xref>). Active microwaves are less sensitive to large-scale roughness compared to passive sensing; however, wide studies require for precise conclusions. It is recommended that the incorporation of topography in radar scattering models will be helpful for precise estimations of SM in hilly regions (<xref ref-type="bibr" rid="R594">Burgin <italic>et al.</italic>, 2016</xref>). <xref ref-type="bibr" rid="R658">Paloscia <italic>et al.</italic> (2010)</xref> have used DEM to simulate ASAR backscattering with the local incidence angle. <xref ref-type="bibr" rid="R610">Filion <italic>et al.</italic> (2016)</xref> have adopted two-dimensional close range photogrammetric approach for roughness measurements.</p>
<p>Moisture status at forest floor has significant effect on ERS backscatter from vegetated lands (<xref ref-type="bibr" rid="R590">Bourgeau<bold>-</bold>Chavez <italic>et al.,</italic> 2007</xref>). Large leaves cause an increase microwave backscatters, whereas narrow leaves mainly absorb the signals (<xref ref-type="bibr" rid="R661">Pasolli <italic>et al.</italic> 2014</xref>). Vegetation strongly absorbs the signal in this \(VV\) -channel (<xref ref-type="bibr" rid="R661">Pasolli <italic>et al.</italic> 2014</xref>). However, <xref ref-type="bibr" rid="R648">Moran<italic> et al.</italic> (2000)</xref> have reported possibilities of SM retrieval without a priori information about dry biomass. Further, <xref ref-type="bibr" rid="R652">Necsoiu <italic>et al.</italic>(2013)</xref> have neglected the impact of vegetation layer in backscatter with consideration of (1) the permittivity vegetation is relatively small in frozen condition, (2) leaf losses of deciduous vegetation before winter, and (3) less canopy of sparse tall trees (conifers) cold region. <xref ref-type="bibr" rid="R696">Verhoest <italic>et al.</italic> (2008)</xref> have stated need of adequate research on roughness parameters to support backscatter modeling to retrieve SM.</p>
</sec>
</sec>
<sec id="s6"><title>Techniques And Models Of Soil Moisture Retrievals</title>
<p><xref ref-type="bibr" rid="R649">Narayanan and Hegde (2000)</xref> have classified the SM retrieval models into three categories: 1) empirical<bold>-</bold>relation based approaches, 2) matrix-based statistical inversion techniques, and 3) neural network based methods. <xref ref-type="bibr" rid="R712">Zribi and Dechambre (2003)</xref> have reported Physical Optics Model (PO), the Geometrical Optics (GO), Small Perturbation Model (SPM), Integral Equation Model (IEM), Empirical and Semi<bold>-</bold>Empirical Models. Further, <xref ref-type="bibr" rid="R712">Zribi and Dechambre (2003)</xref> have successfully introduced dual<bold>-</bold>angle configured IEM. <xref ref-type="bibr" rid="R696">Verhoest <italic>et al.</italic> (2008)</xref> have classified SM retrieval models into three groups: 1) Empirical Models; 2) Semi-Empirical Models and 3) Physically<bold>-</bold>based Models. <xref ref-type="bibr" rid="R637">Kong and Dorling (2008)</xref> reported that the Small Perturbation Model, the Physical Optics Model, the Geometric Optics Model and the Integral Equation Model are theoretical models to improve understanding of the microwave surface scattering processes. <xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic> (2016)</xref> have reported three types of the models: 1) theoretical model 2) empirical regression technique, and 3) semi-empirical model (<xref ref-type="bibr" rid="R569">Al-Bakri <italic>et al.,</italic> 2014</xref>).</p>
<p>Different theoretical and empirical models have been developed for SM estimations for bare soils using SAR data (Zribi <italic>et al.,</italic> 2007). Kirchhoff Approximation (KA), Geometrical Optics Model (GOM) and Physical Optics Model (POM), and Perturbation Model are popular theoretical models (<xref ref-type="bibr" rid="R582">Barrett <italic>et al.</italic>, 2009</xref>). Surface roughness modeling is impractical due to heterogeneity between various fields (<xref ref-type="bibr" rid="R686">Srivastava <italic>et al.,</italic> 2015</xref>) and difficult to extent the modeling techniques for SM mapping over complex large agricultural area (<xref ref-type="bibr" rid="R686">Srivastava <italic>et al.,</italic> 2015</xref>). Theoretical models like Integral Equation Model (IEM) are physically based radiative transfer models. This model simulates the backscattering coefficient which has composite expression of the sensor parameters (frequency, polarization, and incidence angle), surface properties (dielectric constant, roughness, and correlation length), and the autocorrelation function (<xref ref-type="bibr" rid="R569">Al-Bakri <italic>et al.,</italic> 2014</xref>). Theoretical, models are useful to predict general trend of backscattering coefficient with changes in roughness and SM content (<xref ref-type="bibr" rid="R701">Wang, 2009</xref>) with complexity of the parameterization of backscatter from vegetation and soil surface.</p>
<p>Semi-empirical models bridge the complicity of theoretical and simplicity of empirical models. Backscattering coefficient relates to sensor (frequency, incidence angle, and polarization) and surface (dielectric and random roughness). Empirical relation based approaches derive SM measurements using backscattering data at specified frequencies, angles and polarization combinations, average of coefficients for each set of relationships between the surface parameters and backscattering values, and multiple backscatter values from various sensors. <xref ref-type="bibr" rid="R710">Zhang <italic>et al</italic>. (2016)</xref> have used empirical and semi-empirical approaches for SM estimations from TerraSAR-X and Radarsat-2 over bare agricultural land. <xref ref-type="bibr" rid="R614">Gherboudj <italic>et al</italic>. (2011)</xref> have reported models: 1) backscattering model-based retrieval algorithms; and 2) polarimetric information derived from targeted composition techniques for estimations of SM. Backscattering models are site-specific and suitable for bare soils than vegetated surfaces (<xref ref-type="bibr" rid="R701">Wang, 2009</xref>).</p>
<p>The linear approach (<xref ref-type="table" rid="T47">Table 2</xref>) was widely used for linking the surface soil moisture to calibrated and validated SAR measurements (ERS, SIRC, RADARSAT, and so on) (Zribi <italic>et al.,</italic> 2007). Empirical models estimate the SM from statistical relationship between the radar backscattering coefficient and measured SM in the field. These models need to be calibrated using situ measurements (<xref ref-type="bibr" rid="R617">Hajj <italic>et al.,</italic> 2016</xref>). The regression model predicts a wider range for soil moisture (<xref ref-type="bibr" rid="R569">Al-Bakri <italic>et al.</italic>, 2014</xref>). However, Radar backscatters have nonlinear relationship with surface parameters, surface roughness, vegetation (<xref ref-type="bibr" rid="R585">Bertoldi <italic>et al.</italic>, 2014</xref>) and electric constant of the soil (<xref ref-type="bibr" rid="R699">Walker <italic>et al.,</italic> 2003</xref>). It shows nonlinear relationship with saturated soil (<xref ref-type="bibr" rid="R612">Geng <italic>et al.,</italic> 1996</xref>). Complex non-linear problems can be handled using advanced retrieval models to get combined effect of multi-angular, -polarimetric and ancillary data (<xref ref-type="bibr" rid="R661">Pasolli <italic>et al.,</italic> 2014</xref>). Therefore, Least Square Analysis (<xref ref-type="bibr" rid="R674">Said <italic>et al.</italic>, 2012</xref>), ANN (<xref ref-type="bibr" rid="R658">Paloscia <italic>et al</italic>., 2010</xref>), WCM, Support Vector Regression (SVR) Technique, Nonlinear Exponential etc. are widely used models for SM retrievals using MW data (<xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic> 1999</xref>).</p>
<table-wrap id="T47"><label>Table 2</label><caption><title>Techniques and models of soil moisture retrievals</title></caption><table frame="hsides" rules="groups">
<tbody>
<tr><td rowspan="2"><italic>Technique</italic></td><td rowspan="2"><italic>Description </italic></td><td rowspan="2"><italic>Author(s)</italic></td><td colspan="2"><italic>Data used</italic></td><td rowspan="2"><italic>Study area</italic></td><td rowspan="2"><italic>Remark</italic></td></tr>
<tr><td><italic>Satellite/bands</italic></td><td><italic>Laboratory / field</italic></td></tr>
<tr><td><italic>Backscattering Ratio (BR)</italic></td><td><italic>Ratio of backscattering recorded at to dates/time </italic></td><td>Oh <italic>et al.</italic> (1992);<break/><xref ref-type="bibr" rid="R681">Shoshany <italic>et al.</italic> (2000)</xref></td><td>ERS-2 SAR C-VV</td><td><italic>In-situ data</italic></td><td>Israel</td><td>Very sensitive to SM.</td></tr>
<tr><td>Ratio Vegetation Index</td><td></td><td><xref ref-type="bibr" rid="R635">Kim <italic>et al.</italic> (2012)</xref>;<break/>Bai and He (2015);<break/><xref ref-type="bibr" rid="R708">Yue <italic>et al.</italic> (2016)</xref></td><td>TerraSAR-X<break/>Polarized;<break/>RADARSAT-2; SAR</td><td><italic>In-situ data</italic></td><td>Ruoergai and Wutumeiren,<break/>Chin</td><td>Site-specific findings.<break/>Need more technical studies for wide applications.</td></tr>
<tr><td>Normalized Radar Backscatter Soil Moisture Index (NBMI)</td><td><italic>Index calculated using radar images captured at different times.</italic></td><td><xref ref-type="bibr" rid="R681">Shoshany <italic>et al.</italic> (2000</xref>);<break/><xref ref-type="bibr" rid="R647">Moran <italic>et al.</italic> (2004)</xref>;<break/><xref ref-type="bibr" rid="R620">Högström and Bartsch (2017)</xref></td><td>ERS-1/2;<break/>ENVISAT<break/>C</td><td><italic>In-situ data</italic></td><td>Mediterranean<break/>Lena Delta</td><td>Useful to normalize the surface roughness effects.</td></tr>
<tr><td>Image Difference Ratio</td><td><italic>Ration of deference backscattering from dry and wet soil.</italic></td><td><xref ref-type="bibr" rid="R687">Thoma <italic>et al.</italic> (2004)</xref></td><td>ERS-2</td><td><italic>In-situ data</italic></td><td>Arizona, USA.</td><td>Rarely used.</td></tr>
<tr><td>Integral Equation Model (IEM)</td><td>Inversion of Radar data procedures for retrieving SM</td><td><xref ref-type="bibr" rid="R611">Fung <italic>et al.</italic> (1992)</xref>;<break/><xref ref-type="bibr" rid="R574">Baghdadi <italic>et al.</italic> (2004</xref>, <xref ref-type="bibr" rid="R577">2006</xref>);<break/><xref ref-type="bibr" rid="R668">Rahman <italic>et al.</italic> (2008)</xref>;<break/><xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.</italic> (2008)</xref>;<break/><xref ref-type="bibr" rid="R683">Song <italic>et al.</italic> (2009)</xref>;<break/>Baghdadi <italic>et al.</italic> (2015); Etc.</td><td>ASAR, C- HH and VV;<break/>SIR C - HH or VV</td><td><italic>In-situ data</italic> dielectric and structural<break/>properties</td><td>France<break/>Spain<break/>Luxembourg<break/>Belgium, Germany,<break/>Italy</td><td>Good results for images captured with incidence angles between 20ºand 43º.<break/>More studies suggested for wide applications.</td></tr>
<tr><td>Dual-angle Configured Integral Equation Model</td><td>This model uses images captured at two angels.</td><td><xref ref-type="bibr" rid="R712">Zribi and Dechambre (2003)</xref>;<break/><xref ref-type="bibr" rid="R707">Yang <italic>et al.</italic> (2006)</xref></td><td>SAR, ASAR</td><td><italic>In-situ data</italic></td><td>France</td><td>Helps to reduce roughness effects.</td></tr>
<tr><td>Empirically Adopted Integral Equation Model (EA-IEM)</td><td>Models calibrated to obtain optimum values of parameter one that overcame the uncertainties.</td><td><xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref>;<break/><xref ref-type="bibr" rid="R571">Álvarez-Mozos et al. (2008)</xref>;<break/><xref ref-type="bibr" rid="R683">Song <italic>et al.</italic> (2009)</xref></td><td>ERS-2 SAR C-VV</td><td><italic>In-situ data</italic></td><td>Spain</td><td><italic>Further evolutions are required.</italic></td></tr>
<tr><td>Empirical Model</td><td>Empirical relation between backscatter and measured SM.</td><td><xref ref-type="bibr" rid="R637">Kong and Dorling, (2008)</xref>; <xref ref-type="bibr" rid="R604">Dubois <italic>et al.</italic> (1995)</xref>;<break/><xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic> (2016)</xref></td><td>Radarsat-2 C HH (5.3 GHz);<break/>TerraSAR X-HH (9.6 GHz)<break/>ASAR</td><td><italic>In-situ data</italic></td><td>China</td><td>Site specific application.</td></tr>
<tr><td>Semi-Empirical Model</td><td>Combination of theoretical and empirical approaches.</td><td><xref ref-type="bibr" rid="R712">Zribi and Dechambre (2003)</xref>;<break/><xref ref-type="bibr" rid="R707">Yang <italic>et al. </italic>(2006)</xref>;<break/><xref ref-type="bibr" rid="R601">Das and Paul, (2015)</xref>;<break/><xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic> (2016)</xref></td><td>RISAT-1 SAR (C) Polarized;<break/>SAR C, X;<break/>TerraSAR-X 29</td><td><italic>In-situ data</italic></td><td>France<break/>India<break/>China</td><td>It is more applicable for bare surface SM estimations.</td></tr>
<tr><td>Linear Model</td><td>Linear relationship between backscatter and in situ measurements.</td><td><xref ref-type="bibr" rid="R637">Kong and Dorling (2008)</xref>;<break/><xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> (2015)</xref>;<break/><xref ref-type="bibr" rid="R662">Patel and Srivastava, (2015</xref>); etc.</td><td>ASAR</td><td><italic>In-situ data</italic></td><td>Norfolk</td><td>Applicable for bare soil surface.</td></tr>
<tr><td>Power Ratio</td><td>It is more useful to determine linear correlation function between backscatter and surface parameters.</td><td><xref ref-type="bibr" rid="R588">Blumberg <italic>et al.</italic> (2002)</xref></td><td>ERS-2;<break/>SAR C -VV</td><td><italic>In-situ data</italic></td><td>Israel</td><td>Results positively tested with 99.8% significance.</td></tr>
<tr><td><italic>Non-Linear Model</italic></td><td><italic>SM retrieval using </italic>multi-angular, - polarimetric and ancillary data.</td><td><xref ref-type="bibr" rid="R612">Geng <italic>et al.</italic> (1996)</xref>;<break/><xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic> (1999)</xref>;<break/><xref ref-type="bibr" rid="R658">Paloscia <italic>et al.</italic> (2010)</xref>;<break/><xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012)</xref></td><td>SAR C - HH,VV,HV;<break/>ASAR</td><td><italic>In-situ data</italic></td><td>Canada,<break/>India<break/>Italian Alps</td><td><italic>Need more studies for wide applications.</italic></td></tr>
<tr><td>Support Vector Regression (SVR)</td><td>Non-linear machine learning technique for SM retrieval process with ancillary data.</td><td><xref ref-type="bibr" rid="R661">Pasolli <italic>et al.</italic> (2014)</xref>;<break/><xref ref-type="bibr" rid="R585">Bertoldi <italic>et al. </italic>(2014)</xref>;<break/><xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic> (2016)</xref></td><td>ASAR-HH,HV<break/>C, X-HH</td><td><italic>In-situ data</italic></td><td>Italy,<break/>China</td><td>Temporal analysis suggested for further studies.</td></tr>
<tr><td>Least Square Analysis</td><td>Expresses the relationship with surface roughness and SM.</td><td><xref ref-type="bibr" rid="R588">Blumberg <italic>et al.(</italic>2002)</xref>;<break/><xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012)</xref></td><td>SAR C – VV</td><td><italic>In-situ data</italic><break/>P-band airborne scatterometer</td><td>Northern Negev,<break/>North India</td><td>Sensitive to in-situ measurements and calibrations.</td></tr>
<tr><td><italic>Dubois model</italic></td><td><italic>Based on co-polarized backscattering and surface parameters. </italic></td><td><xref ref-type="bibr" rid="R604">Dubois <italic>et al.</italic> (1995)</xref>;<break/>Bai and He (2015)</td><td>TerraSAR X;<break/>RADARSAT-2; SAR</td><td><italic>In-situ data</italic></td><td>Ruoergai and Wutumeiren</td><td><italic>Used for modification in RVI and WCM.</italic><break/>Results depends on surface parameters.</td></tr>
<tr><td>Oh Model</td><td>Estimats SM over random bare soil surface.</td><td><xref ref-type="bibr" rid="R655">Oh <italic>et al.</italic> (2002)</xref>;<break/><xref ref-type="bibr" rid="R653">Oh (2004)</xref>; etc.</td><td>--</td><td>Polarized SAR data</td><td>--</td><td>Fully rely on field assessments of surface roughness.</td></tr>
<tr><td>Water Cloud Model</td><td>Balance between soil surface and vegetation Backscatters contribution.</td><td><xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012</xref>);<break/><xref ref-type="bibr" rid="R652">Necsoiu <italic>et al.</italic> (2013)</xref>;<break/>Bai and He (2015);<break/><xref ref-type="bibr" rid="R708">Yue <italic>et al.</italic> (2016)</xref></td><td>SAR;<break/>PALSAR L;<break/>TerraSAR X;<break/>RADARSAT-2; SAR C</td><td>LAI<break/>Vegetation map<break/><italic>In-situ data</italic></td><td>India<break/>Northwest Alaska<break/>Ruoergai and Wutumeiren<break/>China</td><td>EVI and LAI is the best descriptor to minimize the effect of vegetation.<break/>RVI has been also used.</td></tr>
<tr><td>Combination of Linear and Nonlinear Models</td><td>SM estimated using linear and nonlinear effects in single image.</td><td><xref ref-type="bibr" rid="R651">Narvekar <italic>et al.</italic> (2015)</xref></td><td>--</td><td>Airborne radar</td><td>--</td><td>---</td></tr>
<tr><td>Topp’s Equation</td><td>SM estimation using dielectric constant.</td><td><xref ref-type="bibr" rid="R689">Topp <italic>et al</italic>. (1980)</xref>;<break/><xref ref-type="bibr" rid="R618">Hallikainen <italic>et al. </italic>(1985)</xref>;<break/><xref ref-type="bibr" rid="R646">Mohan <italic>et al.</italic> (2015)</xref></td><td>--</td><td>--</td><td>--</td><td>--</td></tr>
<tr><td>Artificial Neural Networks</td><td>Trained neural<break/>Network.</td><td><xref ref-type="bibr" rid="R658">Paloscia <italic>et al.</italic> (2010)</xref>;<break/><xref ref-type="bibr" rid="R678">Santi <italic>et al.</italic> (2013</xref>);<break/><xref ref-type="bibr" rid="R617">Hajj <italic>et al.</italic> (2016)</xref></td><td>ASAR VV, HH/VV;<break/>SAR X</td><td><italic>In-situ data</italic></td><td>Northeastern Italy<break/>France</td><td><italic>Further evolutions are suggested.</italic></td></tr>
<tr><td><italic>Fusion: Active-passive images</italic></td><td><italic>SAR image combined with radiometric image. </italic></td><td><xref ref-type="bibr" rid="R596">Chauhan (1997)</xref>;<break/><xref ref-type="bibr" rid="R608">Entekhabi <italic>et al.</italic> (2010)</xref>;<break/><xref ref-type="bibr" rid="R695">Velde <italic>et al.</italic> (2015)</xref>;<break/><xref ref-type="bibr" rid="R662">Patel and Srivastava (2015)</xref></td><td>SMAPL2;<break/>PALSAR L and AMSR-E C;<break/>AMSR-E and SAR/ASAR</td><td><italic>In-situ data</italic><break/>Digital photograph</td><td>Netherlands<break/><italic>India</italic></td><td>Results varied with dry and wet season.</td></tr>
<tr><td><italic>Fusion</italic> : SAR with optical data</td><td><italic>SAR image combined with optical image. </italic></td><td><xref ref-type="bibr" rid="R639">Kurucu <italic>et al.</italic> (2009)</xref>;<break/><xref ref-type="bibr" rid="R605">Du <italic>et al.</italic> (2010)</xref>;<break/><xref ref-type="bibr" rid="R617">Hajj <italic>et al.</italic> (2016)</xref></td><td>Radarsat-1 C and SPOT-2 (NIR);<break/>SAR and NDVI (HJ);<break/>LAI and SAR</td><td></td><td>China<break/>India<break/>France</td><td>Useful for correction of vegetation effects in SM retrievals.</td></tr>
<tr><td><italic>Fusion: Multiple Polarized Images</italic></td><td><italic>SAR image combined with second SAR image acquired with different polarization. </italic></td><td>Zribi <italic>et al.</italic> (2007)</td><td>ASAR</td><td><italic>In-situ data</italic></td><td><italic>Niger</italic></td><td><italic>Rarely used. </italic></td></tr>
<tr><td><italic>Fusion : Images Acquired at Multiple Angle </italic></td><td><italic>SAR image combined with second SAR image acquired at different angle. </italic></td><td><xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic> (1999)</xref></td><td>L</td><td><italic>---</italic></td><td><italic>India</italic></td><td><italic>Rarely used.</italic></td></tr>
<tr><td>Change Detection Technique</td><td>SM estimates based on changes recorded in radar backscatter from bear soil at time one and time two.</td><td><xref ref-type="bibr" rid="R584">Bazi <italic>et al.</italic> (2005)</xref><break/><xref ref-type="bibr" rid="R707">Yang <italic>et al.</italic> (2006)</xref>;<break/><xref ref-type="bibr" rid="R664">Pathe <italic>et al.</italic> (2009)</xref>;<break/><xref ref-type="bibr" rid="R605">Du <italic>et al.</italic> (2010</xref>);<break/><xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> (2015)</xref></td><td>HJ SAR VV<break/>S<break/>ScanSAR C- HH;<break/>ASAR<break/>TerraSAR X-HH</td><td>Landsat 5 (TM)<break/><italic>In-situ data</italic></td><td>Italy<break/>China,<break/>USA<break/>Tunisia</td><td>SM changes within short time compare to surface roughness and vegetation.<break/>Need more studies for wide application.</td></tr>
<tr><td>Correlation Coefficient</td><td><italic>Correlation values depends on changes in </italic> \(σ\) recorded in MV images.</td><td><xref ref-type="bibr" rid="R644">Lu and Meyer (2002)</xref>;<break/><xref ref-type="bibr" rid="R682">Singh and Venkataraman (2010)</xref>;<break/><xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.</italic> (2011)</xref></td><td>ERS-1;<break/>ASAR</td><td>Landsat 5 (TM)</td><td>New Mexico,<break/>India</td><td><italic>It reduces vegetation effects.</italic><break/><italic>Rarely used.</italic></td></tr>
<tr><td>Principal Component Analysis (PCA)</td><td>All channels get together effect for SM estimations.</td><td><xref ref-type="bibr" rid="R584">Bazi <italic>et al.</italic> (2005)</xref>;<break/><xref ref-type="bibr" rid="R590">Bourgeau-Chavez <italic>et al.</italic> (2007)</xref>;<break/><xref ref-type="bibr" rid="R637">Kong X. and Dorling (2008)</xref></td><td>ERS SAR C;<break/>ASAR WSM C</td><td><italic>In-situ data</italic> Rainfall<break/>Soil samples, Map, Land use</td><td>Alaska<break/>Norwich</td><td>Need more intensive investigation for wide applications.</td></tr>
<tr><td>Individual Date Soil Moisture Mapping Procedure</td><td>Parametric approach based on Pearson correlation and linear and polynomial regression analysis.</td><td><xref ref-type="bibr" rid="R590">Bourgeau-Chavez <italic>et al.</italic> (2007)</xref></td><td>ERS SAR C</td><td><italic>In-situ data</italic> Rainfall</td><td>Alaska</td><td><italic>Rarely used.</italic><break/>Need more intensive investigations for wide applications.</td></tr>
<tr><td>Soil Moisture Index (SWI)</td><td>--</td><td><xref ref-type="bibr" rid="R570">Albergel <italic>et al.</italic> (2009)</xref>;<break/><xref ref-type="bibr" rid="R593">Brocca <italic>et al.</italic> (2010)</xref></td><td>ASCAT</td><td><italic>In-situ data</italic></td><td>Southwestern France</td><td>Show correlation with in-situ measurements at 5cm</td></tr>
<tr><td>SM Scaling Coefficients</td><td>Dry backscatter reference and sensitivity extracted from SAR images</td><td><xref ref-type="bibr" rid="R698">Wagner <italic>et al.</italic> (2008)</xref></td><td>ASAR</td><td><italic>In-situ data</italic></td><td>Duero basin, Spain</td><td><italic>Useful for coarse</italic><break/><italic>Resolution SM data at sub-pixel level.</italic><break/><italic>More studies require for good results.</italic></td></tr>
</tbody>
</table>
</table-wrap>
<p>Reported advances of SM retrieval models are (<xref ref-type="bibr" rid="R605">Du <italic>et al</italic>., 2010</xref>): (a) estimations using dual-polarization or three-polarization SAR with help of field measurements or theoretical simulations; (b) correcting the effects of surface roughness based on multi-incidence angle SAR data; (c) correcting vegetation effects by a combination of optical observations and SAR measurements; (d) estimating soil moisture change with repeat SAR observations; (e) estimating soil moisture with introducing of prior knowledge on soil moisture and \(rms\) height; (f) combination of observations with high spatial-resolution from active microwave sensors and coarse observations from passive microwave sensors. Inversion techniques are capable for estimations of SM content and surface roughness from active microwave data (Oh and Ulady, 1992).</p>
<sec id="s6-1"><title>6.1 Backscatter Ratio (BR)</title>
<p>The depolarization ratio (BR) is very sensitive to SM (Oh <italic>et al.,</italic> 1992). BR improves SM estimation through discriminating surface parameters, highlighting and minimizing the effects of certain parameters on the radar</p>
<p>signals (<xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.,</italic> 2011</xref>). Scholars have calculated polarization ratios: co-polarization ratio, \(\sigma _{HH}^{0}/\sigma _{VV}^{0}\) and cross-polarization ratio, \(\sigma _{HV}^{0}/\sigma _{VV}^{0}\) (Oh <italic>et al.,</italic> 1992). Co-polarization ratio increases with increasing incidence angle and soil moisture content whereas cross-polarization ratio have weak dependence with soil content in the soil. <xref ref-type="bibr" rid="R621">Holah <italic>et al.</italic>, (2005)</xref> have reported linear relationship between the ratio\(\sigma _{HH}^{0}/\sigma _{HV}^{0}\) and the soil moisture. \(\sigma _{HV}^{0}/\sigma _{VV}^{0}\), signal ratio at L-band are useful to distinguish bare soils from vegetation cover (<xref ref-type="bibr" rid="R573">Aubert <italic>et al.,</italic> 2013</xref>). Further, ratio of L-band, \(\sigma _{HV}^{0}/\sigma _{VV}^{0}\) greater than -11dB show more robust results for SM retrievals (<xref ref-type="bibr" rid="R606">Dubois <italic>et al., </italic>1995</xref>). Co-polarized ratios are sensitive to surface roughness however over vegetated lands, sensitivity disturbs vegetation effects (<xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.,</italic> 2011</xref>). Therefore, \(\sigma _{HH}^{0}/\sigma _{VV}^{0}\) have suggested to minimize the roughness effects and not recommended for SM mapping (<xref ref-type="bibr" rid="R612">Geng <italic>et al.</italic>, 1996</xref>) over vegetated lands.</p>
<p><xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.</italic> (2011)</xref> have calculated (49) it in dB as:</p>
<p>\(\chi _{v}= \sigma _{vh}^{0} \left( dB \right) - \sigma _{vv}^{0} \left( dB \right)\) after <xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.</italic> (2011)</xref> (49)</p>
<p>This model is more sensitive to surface roughness (Srivastava <italic>et al.,</italic> 2008) and vegetation, therefore disturbing accuracy of SM estimations (<xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.,</italic> 2011</xref>). Ratios like BR, NBMI, etc. help to reduce the common multiplicative effects of difference in soil types, surface roughness, etc. on the backscattering from the surface (Shoshany <italic>et al., </italic>2000).</p>
<p>\(V_{sm}=a \left( \frac{ \sigma _{t_{1}}}{ \sigma _{t_{2}}} \right) +b\) after <xref ref-type="bibr" rid="R681">Shoshany <italic>et al.</italic> (2000)</xref> (50)</p>
<p>where, \(V_{sm} \) is the volumetric SM (%), \(\sigma _{t_{1,2}}\) are backscatter(s) at different dates/times (\(t_{1} , t_{2}\)), and \(a \) and \(b \) are the linear coefficients. <xref ref-type="bibr" rid="R681">Shoshany <italic>et al.</italic> (2000)</xref> have used two backscatter data captured at two data-points i.e. maximum and minimum SM levels (50). Further they have calculated backscatter ratio with NBMI. PRs are very sensitive to variations in the roughness of bare fields (<xref ref-type="bibr" rid="R691">Ulaby <italic>et al.</italic>, 1986</xref>) and can be disturbed by the vegetation effect over agricultural fields. <xref ref-type="bibr" rid="R636">Kirimi <italic>et al.</italic> (2016)</xref> reported that elimination of vegetation effects improves the retrievals of SM for both dry and wet lands using this model. Further, <xref ref-type="bibr" rid="R648">Moran <italic>et al.</italic> (2000)</xref> have used Difference Backscatter, DB (51) for correction of vegetation.</p>
<p>\(DB= \sigma ^{0}- \sigma _{dry}^{0}\) (51)</p>
<p><xref ref-type="bibr" rid="R702">Wang<italic> et al</italic>. (2004)</xref> and <xref ref-type="bibr" rid="R684">Sonobe <italic>et al</italic>. (2007)</xref> used differential backscatter coefficient (\(\sigma _{wet}/ \sigma _{dry}\)) to reduce the effect of surface roughness in SM retrievals.</p>
</sec>
<sec id="s6-2"><title>6.2 Ratio Vegetation Index (RVI)</title>
<p>Ratio vegetation index originally has been developed by <xref ref-type="bibr" rid="R630">Joseph <italic>et al.</italic> (2008</xref>, 2010) to eliminate the vegetation effects in SM estimation. RVI is the function of incidence angle and show low sensitivity to bio-physical environmental conditions (<xref ref-type="bibr" rid="R635">Kim <italic>et al.,</italic> 2012</xref>). <xref ref-type="bibr" rid="R635">Kim <italic>et al.</italic> (2012)</xref> have used RVI estimated using co-and cross polarized radar data for estimations of water content in vegetation e.g. crops. Further, <xref ref-type="bibr" rid="R708">Yue <italic>et al.</italic> (2016)</xref> have been used RVI (52) to understand the vegetation effect on SM estimations using WCM.</p>
<p>\(RVI=\frac{8 \times \sigma _{HV}^{0}}{2 \times \sigma _{HV}^{0}+ \sigma _{HV}^{0}+ \sigma _{VV}^{0}}\) after <xref ref-type="bibr" rid="R708">Yue <italic>et al.</italic> (2016)</xref> (52)</p>
<p>RVI ranges from 0 for bare surface to 1 for vegetated land. They have suggested RVI for replacement of crop parameter (height, water contend, LAI) for SM estimations (<xref ref-type="bibr" rid="R708">Yue <italic>et al.</italic> 2016</xref>). <xref ref-type="bibr" rid="R635">Kim <italic>et al.</italic> (2012)</xref> noted that high-resolution radar data is very site sensitive.</p>
<p>Bai and He (2015) have used ratio (53) between backscattering from bare soil surface and observed backscattering coefficient:</p>
<p>\(RVI=\frac{ \sigma _{PP,soil}^{0}}{ \sigma _{PP}^{0}}\) after Bai and He (2015) (53)</p>
<p>Further, it has been modified by Bai <italic>et al.</italic> (2015) with linear and power-type function (54) to element vegetation effects.</p>
<p>\(RVI=\frac{ \sigma _{PP,soil}^{0}}{ \sigma _{PP}^{0}}=aV+bV^{c}\) after Bai and He (2015) (54)</p>
<p>Where, \(a \), \(b \), and \(c\) are coefficients dependent on site-specific vegetation conditions, \(V\) is vegetation parameters, and \(PP\) is polarization. This technique estimates more precise SM than the WCM (Bai and He, 2015). Bai and He (2015) have modified the equation using Dubois model (refer section 5.14).</p>
</sec>
<sec id="s6-3"><title>6.3 Normalized Radar Backscatter SM Index (NBMI)</title>
<p><xref ref-type="bibr" rid="R681">Shoshany <italic>et al.</italic> (2000)</xref> have introduced this technique for SM assessment using radar backscatter coefficient. NBMI (55) can be calculated using radar images captured at two times, \(t_1\) and \(t_2\). It is useful to normalize the effects of surface roughness, soil type and topography on \(\sigma ^{0}\).</p>
<p>\(NBMI=\frac{ \sigma _{t_{1}}^{0}+ \sigma _{t_{2}}^{0}}{ \sigma _{t_{1}}^{0}- \sigma _{t_{2}}^{0}}\) after <xref ref-type="bibr" rid="R681">Shoshany <italic>et al.</italic> (2000)</xref>; <xref ref-type="bibr" rid="R647">Moran <italic>et al</italic>. (2004)</xref> (55)</p>
<p>where, \(\sigma _{t_1}^{0}\) and \(\sigma _{t_2}^{0}\) are the backscatter coefficients at \(t_1\) and \(t_2\). Estimated NBMI values vary from 0 to 1 and show stronger correlations with SM range between 20 and 40%. <xref ref-type="bibr" rid="R705">Wagner and Scipal (2000)</xref> have used this method for backscatter normalization of ERS data acquired for 6 years from Canada, Iberian Peninsula, Ukraine and Western Africa. They offered the model for relative measurement of soil moisture, \(I_{m_{s}}\)(56) as:</p>
<p>\(I_{m_{s}}=~\frac{{ \sigma ^{0} (40^{\circ},t )}- {\sigma _{dry}^{0} ( 40^{\circ} },~t )} { \sigma _{wet}^{0} \left( 40^{ ^{\circ} },~t \right) - \sigma _{dry}^{0} ( 40^{ ^{\circ} },~t )}\) <xref ref-type="bibr" rid="R647">Moran <italic>et al</italic>. (2004)</xref>; <xref ref-type="bibr" rid="R570">Albergel, <italic>et al.</italic> (2009)</xref> (56)</p>
<p>where, \(\sigma _{dry}^{0} (40^{ ^{\circ} },~t)\) represents \(\sigma ^{0}\) from vegetated area under completely dry condition observed from last 6 years, \(\sigma _{wet}^{0} (40^{ ^{\circ} },~t)\) show \(\sigma ^{0}\) from completely saturated surface in last 6 years. These are relative values of MS from 0 (dry) to 100% (wet) estimated for top layer of the soil (<xref ref-type="bibr" rid="R570">Albergel, <italic>et al.,</italic> 2009</xref>). Further, <xref ref-type="bibr" rid="R620">Högström and Bartsch (2017)</xref> have calculated the Saturation Index (SI) in percentage for ASAR data captured at 30º intendance angle (57).</p>
<p>\(SI \left( t \right) =~\frac{ \sigma ^{0} \left( 30^{ ^{\circ} },~t \right) - \sigma _{dry}^{0} \left( 30^{ ^{\circ} },~t \right) }{ \sigma _{wet}^{0} \left( 30^{ ^{\circ} },~t \right) - \sigma _{dry}^{0} \left( 30^{ ^{\circ} },~t \right) } \times 100\) after <xref ref-type="bibr" rid="R620">Högström and Bartsch (2017)</xref> (57)</p>
<p><xref ref-type="bibr" rid="R601">Das and Paul (2015)</xref> have reported Soil Water Index (SWI) (58) as:</p>
<p>\(SWI \left( t \right) =~\frac{ \sum _{i}^{}m_{s} \left( t_{i} \right) e^{- \left( t-t_{i} \right) /T}}{ \sum _{i}^{}e^{- \left( t-t_{i} \right) /T}} \) for \(t_{i} \leq t \) after <xref ref-type="bibr" rid="R601">Das and Paul (2015)</xref> (58)</p>
<p>where, \(m_s\)is the SM estimated from scatterometer at time \(t_1\). The SWI can be calculated if we have at least three measurements with time interval [t-T, t]. T is the time length. <xref ref-type="bibr" rid="R593">Brocca <italic>et al.</italic> (2010)</xref> have used SWI (59) for runoff estimations in Upper Tiber river basin of Central Italy using ASCAT data.</p>
<p>\(SWI ( t_{n} ) = SWI ( t_{n-1})+ K_{n} [ m_{n} ( t_{n}) -SWI ( t_{n-1})]\) (59)</p>
<p>where, \(SWI \ ( t_{n})\) Soil Wetness Index for the profile averaged saturation degree; \(m_n \ ( t_{n})\) is the surface saturation degree captured by the satellite sensor and \(t_n\) is the acquisition time of the image by the sensor. \(k_n\) at time \(t_n\)can be estimated (60) by:</p>
<p>\(K_{n}=\frac {{K_{n}-1}} {{K_{n-1+e}}- (\frac{t_{n}-t_{n-1}}{T})}\) (60)</p>
<p>\(K_n\) varies between 0 and 1.</p>
<p>Index values show stronger relationship for the range between 20 and 40% volumetric SM (<xref ref-type="bibr" rid="R681">Shoshany <italic>et al.</italic>, 2000</xref>). However, this model is only useful when frequent and multi-year backscatter data is available. Some of the scholars have suggested empirical (61) assessments for application over wide area (<xref ref-type="bibr" rid="R681">Shoshany <italic>et al.,</italic> 2000</xref>).</p>
<p>\(W_{s}=a_{r}~ \cdot NBMI+~b_{r}\) (61)</p>
<p>where, \(a_r\) and \(b_r\) are empirical parameters fitted from in situ SM observations. They have also used logarithmic relationship (62) to minimize scattering of points at SM values higher than 20% as:</p>
<p>\(In \left( V_{sm} \right) =a~In \left( NBMI \right) +b\)after <xref ref-type="bibr" rid="R681">Shoshany <italic>et al. </italic>(2000)</xref> (62)</p>
<p>However, accurate retrieval of SM from radar images is not simple, since the backscatter coefficient is strongly influenced by surface and sensor-related parameters (<xref ref-type="bibr" rid="R674">Said <italic>et al</italic>., 2012</xref>). The surface-related parameters include dielectric constant, topography, type of vegetation and surface roughness.</p>
</sec>
<sec id="s6-4"><title>6.4 Image Difference Ratio</title>
<p>Image difference technique proposed by <xref ref-type="bibr" rid="R648">Moran <italic>et al.</italic> (2000)</xref> have been modified by <xref ref-type="bibr" rid="R687">Thoma <italic>et al.</italic> (2004)</xref> for normalizing pixel values of dry scene. This is known as delta index (63), \(\Delta -index \) :</p>
<p>\(\Delta -index=ads \left[ \left( \sigma _{wet}^{0}- \sigma _{dry}^{0} \right) / \sigma _{dry}^{0} \right] *100 \) after <xref ref-type="bibr" rid="R687">Thoma <italic>et al.</italic> (2004)</xref> (63)</p>
<p>\(\sigma _{wet}\) is average backscatter from wet soil and \(\sigma _{dry}\) is average backscatter from dry soil. It is better technique of SM prediction than the IEM (<xref ref-type="bibr" rid="R687">Thoma <italic>et al.,</italic> 2004</xref>; <xref ref-type="bibr" rid="R582">Barrett <italic>et al.,</italic> 2009</xref>).</p>
</sec>
<sec id="s6-5"><title>6.5 Integral Equation Model (IEM)</title>
<p>The backscattering IEM suggested by <xref ref-type="bibr" rid="R611">Fung <italic>et al.,</italic> (1992)</xref> has been widely used to estimate the backscattering coefficient based on: 1) characteristics of the sensor- incidence angle, polarization and radar wavelength; and 2) the land surface- dielectric constant, standard deviation of heights, correlation length, and correlation function (<xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.,</italic> 2006</xref>; <xref ref-type="bibr" rid="R668">Rahman <italic>et al.,</italic> 2008</xref>; <xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.,</italic> 2008</xref>; Baghdadi <italic>et al.,</italic> 2015). Small Perturbation Model (SPM), Geometrical Optic Model (GOM) and Physical Optic Model (POM) are useful for estimation of either for smooth or rough surfaces whereas IEM is useful for wide range of the surface roughness values of agricultural soils (<xref ref-type="bibr" rid="R577">Baghdadi <italic>et al</italic>., 2006</xref>). IEM is a promising algorithm for SM retrieval from active microwave data over bare soil and sparsely vegetated conditions (<xref ref-type="bibr" rid="R683">Song <italic>et al</italic>., 2009</xref>). IEM is most widely used in inversion procedures for retrieving SM as well as roughness parameters (<xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.,</italic> 2006</xref>, <xref ref-type="bibr" rid="R668">Rahman <italic>et al.,</italic> 2008</xref>). It includes soil surface roughness parameters i.e. surface root-mean-square (<italic>rms</italic>) height, surface power spectrum of the surface roughness correlation function and correlation length, sensing configuration parameters i.e. frequency (or wavelength) and look angle (or incidence angle) and dielectric constant of the soil (<xref ref-type="bibr" rid="R683">Song <italic>et al.,</italic> 2009</xref>).</p>
<p>It is difficult to estimate roughness parameters and SM directly at natural surface due to complexity of model and the implicit relationship between soil dielectric constant and active microwave data (<xref ref-type="bibr" rid="R683">Song <italic>et al.,</italic> 2009</xref>). Thus, the inversion of SM from \(\sigma ^{ {0} }\) observations requires the measurement / estimation of the two roughness parameters, \(s\) is the standard deviation of surface heights and the surface correlation length, \(l\) (<xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.,</italic> 2008</xref>). <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref> have suggested the new approach, ‘effective \(l\) values’ (see section 5.7) for realistic applications of IEM techniques and <xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.</italic> (2008)</xref> have been tested positive improvements in studies undertaken for North of Spain. IEM is expensive particularly to retrieve SM on a large scale using from active microwave data. IEM have poor agreement with estimated SM. <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2004)</xref> have proposed an empirical calibration of the IEM model by an optimal calibration parameter (Lopt) with replacing the measured correlation length for each radar configuration. Further, <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref> have reported more precise simulations based on the calibrated IEM with good performance and reduction in bias standard deviation error. They have suggested three calibration parameters e.g. \(rms\) surface height, correlation length, and SM. Baghdadi <italic>et al.</italic> (2015) have achieved better agreement between backscattering coefficient of SAR and simulated backscattering coefficient using calibrated IEM. They have used semi-empirical calibration at L-band of SAR. Experimental correlation length of each training site has been replaced a fitting parameter (Lopt) to achieve good fit between backscattering coefficient provided by the SAR sensor and that simulated by the IEM (Baghdadi <italic>et al.,</italic> 2015). They have used Lopt-1(the lowest value) and Lopt-2 (the highest value) and found Lopt-2 for suitable. Lopt-2 fitting parameter is strongly dependent on <italic>rms </italic>surface height and the incidence angle. Further, <xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.</italic> (2008)</xref> have evaluated approach adopted <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref> for SM retrieval using RADAESAT-1 (C-band, \(HH\) polarization) and reported that ‘effective \(l\) values’ is very promising for SM estimations.</p>
<p>IEM models have limitations of applicability for smooth soils with small slope (<xref ref-type="bibr" rid="R713">Zribi and Dechambre, 2003</xref>), requires knowledge of field conditions (<xref ref-type="bibr" rid="R632">Kaojarern <italic>et al.,</italic> 2004</xref>), underestimates SM (<xref ref-type="bibr" rid="R628">Ji <italic>et al.,</italic> 1996</xref>) and still insufficient for precise SM retrievals for wide applicability. <xref ref-type="bibr" rid="R582">Barrett <italic>et al.</italic> (2009)</xref> have reported the poor performs of IEM for SM estimations over a semi-arid rangeland where near surface rock fragments observed. Scholars have suggested further work:</p>
<list list-type="order">
<list-item><p>To evaluated the accuracy of SM estimation and roughness for bare agricultural areas (<xref ref-type="bibr" rid="R577">Baghdadi <italic>et al., </italic>2006</xref>; <xref ref-type="bibr" rid="R571">Alvarez-Mozos <italic>et al.,</italic> 2008</xref>).</p>
</list-item>
<list-item><p>To test the performances of the calibrated IEM version on surfaces other than bare agricultural soils.</p>
</list-item>
<list-item><p>To extend the calibration approach of the IEM model to SAR data in cross-polarization mode.</p>
</list-item>
</list>
</sec>
<sec id="s6-6"><title>6.6 Dual-angle Configured Integral Equation Model</title>
<p><xref ref-type="bibr" rid="R712">Zribi and Dechambre (2003)</xref> have introduced dual-angle configured Integral Equation Model for estimation of SM using polarized (\(HH\)) radar data captured at incidence angles of 23º and 39º. This model is based on independence of \(\Delta \sigma _{0}\) on SM and the simultaneity of radar data captured at dual-angle configuration. They have suggested additional experiments over wider range of surface roughness and SM conditions to achieve promising results for wide applicability. Further, <xref ref-type="bibr" rid="R707">Yang <italic>et al.</italic> (2006)</xref> have used two microwave radar measurements with different incidence angles for reduction in effects of surface roughness for SM retrievals (<xref ref-type="bibr" rid="R639">Kurucu <italic>et al.,</italic> 2009</xref>).</p>
</sec>
<sec id="s6-7"><title>6.7 Empirically Adopted Integral Equation Model (EA-IEM)</title>
<p>It is nonlinear regression analysis based empirically adopted IEM (EA-IEM). It derives from fitting the model equations to numerical simulations from the original IEM under wide range of soil dielectric constants, incidence angles, and surface roughness conditions (<xref ref-type="bibr" rid="R683">Song <italic>et al.,</italic> 2009</xref>). They have compared EA-IEM results with in-situ measurements to test applicability of the model and suggested for microwave data acquired at incidence angles between 10º and 60º, soil dielectric constants between 4 and 42, surface \(rms\) height from 4 to 31mm, and correlation length from 50 to 250mm. <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref> have confirmed robustness of the empirical calibration IEM proposed by <xref ref-type="bibr" rid="R574">Baghdadi <italic>et al.</italic> (2004)</xref> with good agreement between the IEM-simulated data and the radar-sensor data.</p>
<p><bold>Effective </bold> \(l\) <bold>values</bold></p>
<p><xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref> have suggested the effective value of parameter \(l\) to overcome the uncertainties in ground measurement and limitations of the IEM (Alvarez-Mozos <italic>et al.</italic>, 2008) using following equations (64):</p>
<p>\(l_{eff} \left( s, \theta ,PP \right) = \alpha s^{ \beta }\) after <xref ref-type="bibr" rid="R571">Álvarez-Mozos <italic>et al.</italic> (2008)</xref> (64)</p>
<p>where, \(l_{eff}\) is effective \(l\), \(\theta \) is incidence angle, \(PP\) is polarization, \(s\) is the standard deviation of surface heights, \(\alpha \) (65) and \(\beta\) (65) are coefficients. These coefficients depend on \(\theta \) and \(PP\) can be calculated as:</p>
<p>\(\alpha _{PP}= \delta \left( sin \theta \right) ^{ \mu }\) after <xref ref-type="bibr" rid="R571">Álvarez-Mozos <italic>et al.</italic> (2008)</xref> (65)</p>
<p>\(\beta _{PP}= \eta \theta + \xi\) after <xref ref-type="bibr" rid="R571">Álvarez-Mozos <italic>et al.</italic> (2008)</xref> (66)</p>
<p>where, \(\delta \) , \(\mu \), \(\eta \) and \(\xi \) are calibration coefficients. \(\delta \) and \(\xi \) are dependent on the polarization whereas \(\mu \) and \(\eta \) are independent. <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic>, (2006)</xref> have reported calibration coefficients: \(\delta _{vv}=3.289\), \(\mu =-1.744 \), \(\eta =-0.0025 \), \(\xi _{hh}=1.551 \) and \(\xi _{vv}=1.222\).</p>
<p><xref ref-type="bibr" rid="R571">Álvarez-Mozos <italic>et al.</italic> (2008)</xref> reported that methodology proposed by <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref> for the calculation of the effective correlation length, \(l_{eff}\) is very promising and forward (estimation of \(\sigma ^{ {\circ} }\)). Simulation results of IEM using \(l_{eff}\) are reasonably similar to observations. However, further evaluations with different observations and data sets for over rough surface are suggested for validity testing (<xref ref-type="bibr" rid="R571">Álvarez-Mozos <italic>et al.,</italic> 2008</xref>). <xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.</italic> (2006)</xref> suggested to extent this calibration approach of the IEM model for cross-polarized SAR data.</p>
</sec>
<sec id="s6-8"><title>6.8 Empirical Model (EM)</title>
<p>The empirical model of <xref ref-type="bibr" rid="R606">Dubois <italic>et al.</italic> (1995)</xref> has been widely used in SM retrievals (<xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>). The empirical relationship between radar backscattering and SM have been demonstrated in different studies with assumption of constant surface roughness. Some of them have established linear relationship (67) with incorporating roughness influences (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2008</xref>; <xref ref-type="bibr" rid="R701">Wang, 2009</xref>) as:</p>
<p>\(\sigma ^{ {0} } \left( dB \right) =a+bV_{sm}+ce^{-ks}\) after <xref ref-type="bibr" rid="R696">Verhoest <italic>et al.</italic>(2008)</xref> (67)</p>
<p>where, \(a\), \(b\), and \(c\) are calibration coefficients and \(k\) is the wave number, \(V_{sm}\)is volumatric SM, \(s\)<italic> is \(rms\)</italic> height. These models do not account the spatial properties of soil roughness (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2008</xref>). The empirical models are fully relied on field data to establish statistical laws (<xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>). <xref ref-type="bibr" rid="R604">Dobson <italic>et al.</italic> (1984)</xref> have reported that empirical mixing models are not consistently predicts the measured behavior of the imaginary part of the dielectric constant. Empirical models are useful to estimate precise SM conditions but not applicable for datasets of other than calibrated conditions (<xref ref-type="bibr" rid="R701">Wang, 2009</xref>). Therefore, the results are site- and time-dependent and difficult to generalize for a wide application (<xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>).</p>
</sec>
<sec id="s6-9"><title>6.9 Semi-Empirical Model (SEM)</title>
<p>Semi-empirical model is combination of theoretical and empirical approaches with acceptable compromise based on a theoretical foundation of parameters derived from experimental data (<xref ref-type="bibr" rid="R701">Wang, 2009</xref>). It shows relationship between surface SM (volumetric), \(V_{sm}\) and radar backscatter (dB), \(\sigma _{dB}^{0}\) (<xref ref-type="bibr" rid="R712">Zribi and Dechambre, 2003</xref>) (68) as:</p>
<p>\(\sigma _{dB}^{0}= \alpha V_{sm}+ \beta\) after <xref ref-type="bibr" rid="R712">Zribi and Dechambre (2003)</xref> (68)</p>
<p>where, \(\alpha \) and \(\beta\) are constants. This relation has been validated using data from many agriculture watersheds. The slope, \(\beta\) varies watershed to watershed and needs calibration for application at large area (<xref ref-type="bibr" rid="R712">Zribi and Dechambre, 2003</xref>). <xref ref-type="bibr" rid="R713">Zribi <italic>et al.</italic> (2006)</xref> have suggested a semi-empirical model to distinguish the effects of roughness and moisture in a surface scattering model for heterogeneous terrains. Further, <xref ref-type="bibr" rid="R707">Yang <italic>et al.</italic> (2006)</xref> have simplified semi-empirical surface backscattering model (69) for C-band polarized radar data from minimizing the effect vegetation (<xref ref-type="bibr" rid="R639">Kurucu <italic>et al.,</italic> 2009</xref>) as:</p>
<p>\(\sigma _{hh}^{s} ( \theta ) =A ( \theta ,~Sr ) +B ( \theta ) log_{10} ( \Gamma ^{0})\) after <xref ref-type="bibr" rid="R707">Yang <italic>et al.</italic> (2006)</xref> (69)</p>
<p>where, \(\sigma _{hh}^{s}\) is the backscattering coefficients (dB) at \(HH\) polarization, \(\Gamma ^{0} \) is the flat surface reflectivity at normal incidence. \(\theta \) is the incidence angle. \(B\) is the the function of the Radarsat incidence angle, \(A\) is the roughness parameter, \(Sr\) is surface roughness. The semi-empirical model useful to estimate SM at frequencies above 4 GHz, however, does not fully account for the dielectric properties of bound water at low moisture contents (<xref ref-type="bibr" rid="R606">Dubois <italic>et al.,</italic> 1995</xref>). Therefore, many scholars e.g. <xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic> (2016)</xref> have used Dubois model for estimations of SM from SAR data. They have used this model based on C- and X-band SAR for SM estimations with semi-empirical approach. Semi-empirical models are only valid for bare soil surfaces and inadequate for precise SM estimation (<xref ref-type="bibr" rid="R628">Ji <italic>et al.,</italic> 1996</xref>).</p>
</sec>
<sec id="s6-10"><title>6.10 Linear Model</title>
<p>Scholars like <xref ref-type="bibr" rid="R647">Moran <italic>et al.</italic> (2004)</xref>, <xref ref-type="bibr" rid="R684">Sonobe <italic>et al.</italic> (2008)</xref>, <xref ref-type="bibr" rid="R637">Kong and Dorling (2008)</xref>, <xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> (2015)</xref>, etc. have understood the relationship between radar backscatter and in situ SM data with the help of linear regression model. <xref ref-type="bibr" rid="R647">Moran <italic>et al.</italic> (2004)</xref> given simple formula (70) for estimation of SM:</p>
<p>\(m_{s}=a+b \sigma _{s}^{0}\) after <xref ref-type="bibr" rid="R647">Moran, <italic>et al.</italic> (2004)</xref>, <xref ref-type="bibr" rid="R662">Patel and Srivastava (2015)</xref> (70)</p>
<p>However, this linear relationship is only applicable when: 1) surface is uniform, 2) two-way attenuation of the vegetation, and 3) direct backscatter contribution of the vegetation and multiple scattering from the vegetation and ground surface are negligible (<xref ref-type="bibr" rid="R647">Moran <italic>et al.,</italic> 2004</xref>)</p>
<p><xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic> (1999)</xref> have given formula (71) to estimate \(V_{sm}\) using dielectric constant.</p>
<p>\(\sigma ^{ {0} }=A^{&apos;}+B^{&apos;}V_{sm}+C^{&apos;} \sigma +D^{&apos;}m\) after <xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic> (1999)</xref> (71)</p>
<p>where, \(A^{&apos;}\), \(B^{&apos;}\), \(C^{&apos;}\) and \(D^{&apos;}\) are constants however, they are valid for low values of \(V_{sm}\) and dielectric constant.</p>
<p><xref ref-type="bibr" rid="R637">Kong and Dorling (2008)</xref> have characterized the relationship (72) between field mean near-surface SM and average radar signal over the field on seven images acquired at different dates:</p>
<p>\(\sigma _{dB}^{0}=aW_{c}+b \) after <xref ref-type="bibr" rid="R637">Kong and Dorling (2008)</xref> (72)</p>
<p>where, \(\sigma _{dB}^{0}\) is the field average radar backscatter in dB; \(W_c\) is the field mean soil moisture measured by the TDR instrument; and \(a\) and \(b\) are coefficients.</p>
<p><xref ref-type="bibr" rid="R696">Verhoest <italic>et al. </italic>(2008)</xref> have reported popular equation (73) as:</p>
<p>\(\sigma ^{0} \left( dB \right) =a+b~V_{sm}+ce^{-ks}\)after <xref ref-type="bibr" rid="R696">Verhoest <italic>et al. </italic>(2008)</xref> (73)</p>
<p>where, \(a\) , \(b\) and \(c\) are calibration coefficients, \(k\) is the wave number (\(k=2 \pi \)). \(\lambda \) is wavelength. This model is depend on polarization and incidence angle.</p>
<p><xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> (2015)</xref> have used simple model (74) as:</p>
<p>\(\sigma _{dB}^{0}=S_{0}~V_{sm}+f \left( R \right)\) after <xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> (2015)</xref> (74)</p>
<p>where, \(S_0\) radar signal sensitivity to SM and \(f(R)\) is function of the roughness. However, they have considered Negligible Roughness Effect for change detection using consecutive radar backscatter images and expressed (75):</p>
<p>\(\Delta \sigma ^{ ^{0} }=S_{0} \vert \Delta V_{sm}\) after <xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> (2015)</xref> (75)</p>
<p><xref ref-type="bibr" rid="R610">Filion <italic>et al.</italic> (2016)</xref> have established following regression equation (76) for SM (10 to 26%) estimation from dB \(VV\) -polarized C-band SAR data (ENVISAT ASAR):</p>
<p>\(ESM=3.0dB+38.1\) after <xref ref-type="bibr" rid="R610">Filion <italic>et al.</italic> (2016)</xref> (76)</p>
<p>Further, <xref ref-type="bibr" rid="R686">Srivastava <italic>et al.</italic> (2015)</xref> have used \(In \left( \sigma _{HH}^{0}- \sigma _{HH}^{0} \right)\) to improve the model efficiency through incorporating surface roughness (77) as:</p>
<p>\(SM=A+B* \left( \sigma _{VV}^{0} \right) +C*In \left( \sigma _{HH}^{0}- \sigma _{HH}^{0} \right)\) after <xref ref-type="bibr" rid="R686">Srivastava <italic>et al.</italic> (2015)</xref> (77)</p>
<p>They used following equation (78) for incorporating the crop effect as:</p>
<p>\(SM \_ WAP=A+B* \left( \sigma _{VV}^{0} \right) +C*In \left( \sigma _{VH}^{0} \right)\)after <xref ref-type="bibr" rid="R686">Srivastava<italic> et al.</italic> (2015)</xref> (78)</p>
<p>\(\sigma ^{ {0} }\), \(VV\)-polarization and field measurements of SM show good agreement (regression coefficient) in vegetated agriculture areas (<xref ref-type="bibr" rid="R658">Paloscia <italic>et al</italic>., 2010</xref>). An internal closed-loop calibration procedure should be developed to provide a good calibration for the return signals (<xref ref-type="bibr" rid="R598">Choudhury <italic>et al</italic>., 1975</xref>). Exponential correlation functions give a good fit to the majority of experimental surfaces for agricultural soil studies (<xref ref-type="bibr" rid="R712">Zribi <italic>et al.,</italic> 2002</xref>).</p>
</sec>
<sec id="s6-11"><title>6.11 Nonlinear Model</title>
<p>Radar backscatters have nonlinear relationship with surface parameters, surface roughness, vegetation (<xref ref-type="bibr" rid="R585">Bertoldi <italic>et al.</italic>, 2014</xref>) and electric constant of the soil (<xref ref-type="bibr" rid="R699">Walker <italic>et al</italic>., 2003</xref>). <xref ref-type="bibr" rid="R612">Geng <italic>et al.</italic> (1996)</xref> have reported nonlinear of radar backscatters with saturated soil. Complex non-linear problems can be handled using advanced retrieval models to get combined effect of multi-angular, - polarimetric and ancillary data (Pasolli <italic>et al.,</italic> 2014). Least Square Analysis (<xref ref-type="bibr" rid="R674">Said <italic>et al.</italic>, 2012</xref>), ANN (<xref ref-type="bibr" rid="R658">Paloscia <italic>et al.</italic>, 2010</xref>), WCM, Support Vector Regression (SVR) (<xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic>, 2016</xref>) technique are widely used techniques for SM retrieval using MW data. <xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic> (1999)</xref> have developed nonlinear exponential relationship (79) of radar response at specified frequency, polarization and incidence angle with surface parameters SM, surface roughness, and slope.</p>
<p>\(\sigma ^{{0} }=A+Bexp \left( -\frac{V_{sm}}{V_{sm^{0}}} \right) +Cexp \left( -\frac{ \sigma }{ \sigma _{0}} \right) +Dexp \left( -\frac{m}{m_{o}} \right)\)after <xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic> (1999</xref>) (79)</p>
<p>where, \(A^{&apos;}\), \(B^{&apos;}\), \(C^{&apos;}\) \(D^{&apos;}\), \(V_{sm}\) and \(\sigma ^{ {\circ} }\) are constants, they are depend on frequency, polarization combinations and incidence angle and valid for saturation values of \(V_{sm}\) and dielectric constant.</p>
<p><xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic> (1999)</xref> have re-conceptualized the model equation (80) as:</p>
<p>\(M_{1} \left( \theta _{1},f_{1},PP_{1} \right) = A_{1}+B_{1} exp \{-\frac{V_{sm}} {V_{sm^{0}}}\} + C_{1}exp \{- \frac { \sigma }{ \sigma _{0}} \} +D_{1}exp~ \{ -\frac{m}{m_{o}}\}\), after <xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic> (1999</xref>) (80)</p>
<p>\(M_{2} \left( \theta _{2},f_{2},PP_{2} \right) = A_{2}+B_{2} exp \{-\frac{V_{sm}} {V_{sm^{0}}}\} + C_{2}exp \{ -\frac { \sigma }{ \sigma _{0}} \} +D_{2}exp~ \{ -\frac{m}{m_{o}}\}\) , after <xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic> (1999</xref>) (81)</p>
<p>\(M_{N} \left( \theta _{N},f_{N},PP_{N} \right) = A_{N}+B_{N} exp \{-\frac{V_{sm}} {V_{sm^{0}}}\} + C_{N}exp \{ -\frac { \sigma }{ \sigma _{0}} \} +D_{N}exp~ \{ -\frac{m}{m_{o}}\}\), after <xref ref-type="bibr" rid="R650">Narayanan <italic>et al.</italic> (1999)</xref> (82)</p>
<p>here, \(V_{{sm}^0}\), \(\sigma _{ {\circ} }\) and \(m _{ {\circ} }\) are mean values and \(A\), \(B\), \(C\) and \(D\) are recomputed constants, \(M\) is measurable backscatter coefficient, \(\theta \) is incidence angle, \(f\) is frequency and \(PP\) is polarization combinations and \(N\) is the number of variables involved in inversion. Over constrain shows in calculation, if \(N &lt;3\) . Nonlinear techniques improve the accuracy the SM estimations (<xref ref-type="bibr" rid="R649">Narayanan and Hegde, 2000</xref>). However, nonlinear classifiers fail to recognize boundaries (<xref ref-type="bibr" rid="R649">Narayanan and Hegde, 2000</xref>).</p>
</sec>
<sec id="s6-12"><title>6.12 Support Vector Regression (SVR)</title>
<p>SVR is robust and customized nonlinear machine learning technique for retrieval process with ancillary data (<xref ref-type="bibr" rid="R585">Bertoldi <italic>et al.</italic>, 2014</xref>). <xref ref-type="bibr" rid="R661">Pasolli <italic>et al.</italic> (2014)</xref> introduced Support Vector Regression (SVR) model into SM inversion using microwave remote sensing data. <xref ref-type="bibr" rid="R710">Zhang <italic>et al.</italic> (2016)</xref> have used SVR for empirical analysis with two cases of C-band or X-band image: (1) using single image of C-band or X-band and (2) using combination of a pair of C-band and X-band images. <xref ref-type="bibr" rid="R585">Bertoldi <italic>et al.</italic> (2014)</xref> have successfully estimated volumetric SM using SVR and multiple polarizations (\(HH\) and \(HV\)) together with high resolution DEM, land cover map and NDVI maps in mountain areas. Analyses for temporal SM dynamics using SAR data has been suggested for further studies.</p>
</sec>
<sec id="s6-13"><title>6.13 Least Square Analysis</title>
<p>Least square equation expresses the relationship of backscatter (dB) with surface roughness and soil-water content (<xref ref-type="bibr" rid="R588">Blumberg <italic>et al., </italic>2002</xref>). Backscatter expressed in power ratio (83) is more convenient than in dB to establish a linear correlation between radar backscatter and surface parameters (<xref ref-type="bibr" rid="R588">Blumberg <italic>et al., </italic>2002</xref>).</p>
<p>\(\sigma _{dB}^{ {\circ} }=10~log^{10} \left( \sigma ^{ {\circ} } \right)\) after <xref ref-type="bibr" rid="R588">Blumberg <italic>et al.</italic>(2002)</xref> (83)</p>
<p><xref ref-type="bibr" rid="R588">Blumberg<italic> et al.</italic> (2002)</xref> have used the following equations (84; 85) to establish the relationship between backscatter energy ratio and the incidence angle parameter:</p>
<p>\(Cos \theta \cdot10^{ \left( \frac{ \sigma _{asc}^{ ^{0} }}{10} \right) }=0.005094+0.00102~Mvol\%+7.85*10^{-5}h\) after <xref ref-type="bibr" rid="R588">Blumberg<italic> et al.</italic> (2002)</xref> (84)</p>
<p>\(Cos \theta \cdot10^{ \left( \frac{ \sigma _{desc}^{ ^{0} }}{10} \right) }=0.005139+0.001031~Mvol\%+7.94*10^{-5}h\)after <xref ref-type="bibr" rid="R588">Blumberg<italic> et al.</italic> (2002)</xref> (85)</p>
<p>where, \(\sigma _{asc}^{ {0}}\) is the backscatter measured in the ascending images, \(\sigma _{desc}^{ {0}}\) is the backscatter measured in the descending images, \(\theta \) is the incidence angle for the specific pixel, \(Mvol\) is the volumetric water content in % and \(h\) is the \(rms\) height (in mm). <xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012)</xref> have used nonlinear Least Square Analysis (LSA) method for volumetric SM over cropped area. They have used direct-vegetation corrected backscatter coefficient computed using the physically-based modeling (WCM) approach, calculated backscatter coefficient obtained from the Dubois model, and the observed soil moisture as inputs to LSA for estimations volumetric SM. This results from errors in-situ measurements and calibrations (<xref ref-type="bibr" rid="R674">Said <italic>et al.,</italic> 2012</xref>).</p>
</sec>
<sec id="s6-14"><title>6.14 Dubois Model</title>
<p>The ‘Dubois model’ (<xref ref-type="bibr" rid="R606">Dubois <italic>et al.,</italic> 1995)</xref> simplifies relationship between the dielectric constant and co-polarization backscattering coefficients (<xref ref-type="bibr" rid="R628">Ji <italic>et al.,</italic> 1996</xref>). It establishes the statistical relationship (86, 87) between the co-polarized backscattering coefficients of bare soil surface and root mean square (RMS) height \(s\), the real part of the dielectric constant, \(\varepsilon \), incidence angle, \(\theta \), wavelength, \(\lambda \) (cm) and the wave numbers, \(k \) :</p>
<p>\(\sigma _{VV,~~soil}^{0}=10^{2.35} \left( \frac{cos^{3} \theta }{sin^{3} \theta } \right) 10^{0.046~ \varepsilon ~tan \theta } \left( ks~sin \theta \right) ^{1.1} \lambda ^{0.7}\)after Bai and He (2008) (86)</p>
<p>\(\sigma _{HH,~soil}^{s}=10^{2.75} \left( \frac{cos^{1.5} \theta }{sin^{5} \theta } \right) 10^{0.028~ \varepsilon ~tan \theta } \left( ks~sin \theta \right) ^{1.4} \lambda ^{0.7}\) after Bai and He (2008) (87)</p>
<p>were, \(\sigma _{VV, soil}^{0}\) and \(\sigma _{HH, soil}^{0}\) are the backscattering coefficients of \(VV\) and \(HH\) polarizations, respectively. The effect of correlation length is not considered in this model. Bayesian approach with Dubois model was used for estimation of SM however <xref ref-type="bibr" rid="R659">Paloscia <italic>et al.</italic> (2005)</xref> have found general agreement with ground measurements.</p>
<p>Bai and He (2015) have simplified the Dobois model with ration vegetation method (88) as:</p>
<p>\(\varepsilon =5.49 \times \left( \sigma _{VV}^{0} \left( a_{VV}V+b_{VV}V^{c_{VV}} \right) \right) -4.31 \times \left( \sigma _{HH}^{0} \left( a_{HH}V+b_{HH}V^{c_{HH}} \right) \right) +25.22\) after Bai and He (2015) (88)</p>
<p>where, \(\sigma _{VV}^{0}\) and \(\sigma _{HH}^{0}\) are the backscattering coefficients of \(VV\) and \(HH\) polarizations, \(a_{VV}\), \(b_{VV}\), \(c_{VV}\), \(a_{HH}\), \(b_{HH}\) and \(c_{HH}\), are model coefficients. Dubois model uses broad frequency range (1.4 to 18 GHz) and provides both the real and imaginary components of the dielectric constant for soil texture, bulk density and volumetric soil moisture. It is best suitable to achieve SM estimations over bare to sparsely vegetated land, used co-polarized backscattering coefficients and easier to calibrate (<xref ref-type="bibr" rid="R582">Barrett <italic>et al.,</italic> 2009</xref>). This model produces better results than the Oh and IEM (<xref ref-type="bibr" rid="R628">Ji <italic>et al.,</italic> 1996</xref>). Bai and He (2015) have used this model to update WCM (Refer section 5.16). However, valid only for co-polarized terms (<xref ref-type="bibr" rid="R628">Ji <italic>et al.,</italic> 1996</xref>), overestimates the radar response and depend on site-specific vegetation and soil surface.</p>
</sec>
<sec id="s6-15"><title>6.15 Oh model</title>
<p>Oh <italic>et al.</italic> (1992) have suggested semi-empirical polarimetric backscattering model and improved model in <xref ref-type="bibr" rid="R655">2002</xref> for estimations of SM over random bare soil surface. However, these models are relied on field assessment of surface roughness. Further, <xref ref-type="bibr" rid="R653">Oh (2004)</xref> models can retrieve SM using only one surface parameter e.g. \(rms\) height from multi-polarized data. It can invert dielectric constant and surface roughness without field measurements (<xref ref-type="bibr" rid="R582">Barrett <italic>et al.,</italic> 2009</xref>). However, this model is using co- and cross-polarized ratios which cross-polarized ratio shows uncertainty than co-polarized backscatter. Therefore, it shows poor agreement between inversed and measured SM (<xref ref-type="bibr" rid="R628">Ji <italic>et al.,</italic> 1996</xref>) with limitation to produce promising results of SM retrievals (<xref ref-type="bibr" rid="R582">Barrett <italic>et al.,</italic> 2009</xref>). <xref ref-type="bibr" rid="R569">Al-Bakri <italic>et al.,</italic> (2013)</xref> have observed low spatial ACF SM maps produced from Oh model. This model ignores effects of soil texture on \(\sigma ^{0}\) (<xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.,</italic> 2011</xref>). <xref ref-type="bibr" rid="R636">Kirimi <italic>et al.</italic> (2015)</xref> have used Oh Model for SM retrievals over Malinda Wetland, Tanzania. <xref ref-type="bibr" rid="R711">Zhao <italic>et al.</italic> (2016)</xref> have suggested improved semi-empirical surface backscattering model for SM retrieval without ground measurements after Oh model and validated with ground observations. Additional studies using different SAR data are suggested for application of wide data sources and regions.</p>
</sec>
<sec id="s6-16"><title>6.16 Water Cloud Model</title>
<p>Water Cloud Model (WCM) (89) was developed by <xref ref-type="bibr" rid="R572">Attema and Ulaby (1978)</xref> to minimize effect of vegetation on the backscattering coefficient.</p>
<p>\(\sigma ^{0}= \sigma _{veg}^{0}+ \tau^{2} \sigma _{soil}^{0}\) <xref ref-type="bibr" rid="R677">Sano <italic>et al.</italic> (1998)</xref> (89)</p>
<p>where, \(\sigma ^{ {\circ} }\)backscatter coefficient of a canopy, \(\sigma _{veg}^{ {\circ}}\) is backscatter from vegetation, \(\sigma _{soil}^{ {\circ}}\) backscatter from soil and \(\tau^{2}\) two way attenuation of the vegetation layer.</p>
<p>It is semi-empirical model modified by various authors and widely used for modeling the total backscattered radar signal from SM and vegetation parameters (<xref ref-type="bibr" rid="R674">Said <italic>et al.</italic>, 2012</xref>; <xref ref-type="bibr" rid="R617">Hajj <italic>et al.,</italic> 2016</xref>). <xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012)</xref> have used this model to eliminate the vegetation effects on the backscatter coefficient for SM estimations using ERS-2 SAR images. <xref ref-type="bibr" rid="R652">Necsoiu <italic>et al.</italic> (2013)</xref> have used WCM for SM estimation (90):</p>
<p>\(\sigma _{t}= \sigma _{c}+ \sigma _{as}\) after <xref ref-type="bibr" rid="R652">Necsoiu <italic>et al.</italic> (2013)</xref> (90)</p>
<p>\(\sigma _{c}=074 \omega \left[ 1+0.54 \omega \tau-0.24 \left( \omega \tau \right) ^{2} \right] \left[ 1-e^{\frac{2 \tau}{cos \theta }} \right] cos \theta \) after <xref ref-type="bibr" rid="R652">Necsoiu <italic>et al.</italic> (2013)</xref> (91)</p>
<p>\(\sigma _{as}=e^{\frac{2 \tau}{cos \theta }} \sigma _{s}\) after <xref ref-type="bibr" rid="R652">Necsoiu <italic>et al.</italic> (2013)</xref> (92)</p>
<p>where, \(\sigma _{ s }\) is the soil backscattering, \(\sigma _{ as }\) contribution simulated using Oh’s (2004) model, and \(\sigma _{ c }\) is the contribution from the canopy, \(\sigma _{ c }\) is the local incidence angle, \(\tau^{}\) is the optical thickness and \(\omega \) is the albedo. Scholars like <xref ref-type="bibr" rid="R638">Kumar <italic>et al.</italic> (2017)</xref>, <xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012)</xref>, etc. have been used Interferometric Water Cloud Model (IWCM) for estimations of above ground biomass based on decomposition modeling (93) of SAR data as well as PolInSAR coherence estimation.</p>
<p>\(\sigma _{canopy}^{0}= \sigma _{veg}^{0}+ \gamma ^{2} \sigma _{soil}^{0}\) <xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012)</xref> (93)</p>
<p>\(\sigma _{veg}^{0}=AV_{1}cos \alpha _{ref} \left( 1- \gamma ^{2} \right)\) <xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012)</xref> (94)</p>
<p>\(\gamma ^{2}=exp \left( -2V_{2}B/cos \alpha _{ref} \right)\) <xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012)</xref> (95)</p>
<p>\(\sigma _{soil}^{0}=C+Dm_{v}\) <xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012)</xref> (96)</p>
<p>where, \(\sigma _{canopy}^{0}\) is the total backscatter (SAR) coefficient over the canopy; \(\sigma _{veg}^{0}\) is the backscatter from vegetation only; \(\gamma ^{2}\) is the two-way canopy transmitting factor; and \(\sigma _{soil}^{0}\) backscatter (SAR) coefficient of the soil underneath vegetation. It includes soil moisture and soil surface roughness. \(V_1\) and \(V_2\) are the canopy descriptors, \(A\) and \(B\) are coefficients varies with the type of vegetation, and <italic>mv </italic>is the volumetric soil moisture. \(C\) and \(D\) are soil parameters related to moisture and soil surface roughness.</p>
<p>\( \sigma _{can}^{0} \left( \theta \right) = \sigma _{veg}^{0} \left( \theta \right) + \gamma ^{2} \left( \theta \right) \sigma _{soil}^{0} \left( \theta \right)\) (97)</p>
<p>\(\sigma _{veg}^{0} \left( \theta \right) =A~m_{veg}cos \left( \theta \right) \left( 1- \gamma ^{2} \left( \theta \right) \right)\) (98)</p>
<p>\(\gamma \left( \theta \right) _{pp}^{0}=exp \left( -2Bm_{veg}sec⁡ \left( \theta \right) \right)\) (99)</p>
<p>where, \(\sigma _{can}^{0}\) is the total backscattering from vegetated surface, \(\sigma _{veg}^{0} \left( \theta \right)\) is the backscattering of vegetation, \(\sigma _{soil}^{0} \left( \theta \right)\) is the direct backscattering from soil surface, \(\gamma ^{2} \left( \theta \right)\) is the one-way attenuation factor of the canopy, \(A\) and \(B\) are dependent on vegetation type, \(m_{veg} \) is the vegetation water content and \(\theta\) is the incident angle. However, very few studies have compared different vegetation parameters to define the optimal use in WCM (<xref ref-type="bibr" rid="R617">Hajj <italic>et al.</italic>, 2016</xref>).</p>
<p>Further, Bai and He (2015) have used this formula (100) for polarized data as:</p>
<p>\(\sigma _{PP}^{0}= \sigma _{PP,veg}^{0}+ \tau^{2} \sigma _{PP,~soil}^{0}\)after Bai and He (2015) (100)</p>
<p><xref ref-type="bibr" rid="R708">Yue <italic>et al.</italic> (20016)</xref> have used RVI for correction of vegetation effects on SM estimations (101) in China using RADARSAT-2 SAR data.</p>
<p>\(\sigma _{pq \_ soil}^{0}=M \times MV+N\) after <xref ref-type="bibr" rid="R708">Yue <italic>et al.</italic> (20016)</xref> (101)</p>
<p>Further, simplified model would be express as:</p>
<p>\(\sigma _{pq}^{0}=a \times RVI^{c} \times cos \theta \left( 1-e^{ \left( -2 \times b \times RVI^{d} \times sec \theta \right) } \right) + \left( M \times MV+N \right) \times e^{ \left( -2 \times b \times RVI^{d} \times sec \theta \right)}\) after <xref ref-type="bibr" rid="R708">Yue <italic>et al.</italic> (2016)</xref> (102)</p>
<p>where, \(M\) and \(N\) are the parameters of soil model, MV is the soil moisture and \(a\), \(b\), \(c\), and \(d\) are model parameters. They have claimed that no need of vegetation parameters like crop parameter height, water contend, LAI for SM estimation using this model since RVI used in this study. Bai and He (2015) have modified (103) this model for SM estimation using polarized data:</p>
<p>\(\sigma _{PP}^{0}=aV^{2}+b \sigma _{PP,soil}^{0}+ \sigma _{PP,soil}^{0}\) Bai and He (2015) (103)</p>
<p>They have updated (104) this model based on the simplified Dubison model as:</p>
<p>\(\varepsilon =5.49 \times \left( \frac{ \sigma _{VV}^{0}-a_{VV}^{0}V^{2}}{b_{VV}V+1} \right) -4.31 \times \frac{ \sigma _{HH}^{0}-a_{HH}^{0}V^{2}}{b_{HH}V+1}+25.22\) after Bai and He (2015) (104)</p>
<p>These models are very site-specific requires more studies to reach findings for wide applicability.</p>
</sec>
<sec id="s6-17"><title>6.17 Combination of Linear and Nonlinear Models</title>
<p>Bear soils show nonlinear relationship between backscatter and volumetric SM whereas linear relation observed over vegetated areas (<xref ref-type="bibr" rid="R651">Narvekar <italic>et al.,</italic> 2015</xref>). \(P_{VV}\) is more sensitive to VSM than \(P_{HH}\). Therefore, <xref ref-type="bibr" rid="R651">Narvekar <italic>et al.</italic> (2015)</xref> combined these linear and nonlinear effects in single equation (105) as:</p>
<p>\(\sigma _{VV}= \left[ dB \right] =Sensitivity*m_{v}^{⋌}+Intercept\)after <xref ref-type="bibr" rid="R651">Narvekar <italic>et al.</italic> (2015)</xref> (105)</p>
<p>\(Sensitivity\) and \(Intercept\) are function of soil surface roughness and vegetation. \(Sensitivity\) varies from low to high vegetation and from smooth to rough bare soils (<xref ref-type="bibr" rid="R651">Narvekar <italic>et al. </italic>2015</xref>). \(Intercept\) is the backscatter value and function of surface roughness estimated more for bare soils and less for low vegetation. It becomes function of vegetation for vegetated land and of surface for barren lands. \(\lambda \) is a function of vegetation level showing SM dependence. \(\lambda =1\)(linear relation) for vegetated surfaces with a closed canopy and \(\lambda &lt;1\) (nonlinear relation) is for bear soil and sparsely vegetated surface.</p>
</sec>
<sec id="s6-18"><title>6.18 Topp’s Equation</title>
<p>The scholars have used Topp model (<xref ref-type="bibr" rid="R689">Topp <italic>et al.,</italic> 1980</xref>) for retrieving the SM using dielectric constant (<xref ref-type="bibr" rid="R582">Barrett <italic>et al. </italic>2009</xref>). <xref ref-type="bibr" rid="R601">Das and Paul (2015)</xref> have been used <xref ref-type="bibr" rid="R618">Hallikainen <italic>et al.</italic> (1985)</xref> equation (106) for calculation of dielectric constant. Individual polynomial expressions were formulated for \(\varepsilon &apos;\) and \(\varepsilon^ {&quot;} \) as a function of SM for each frequency and soil type. They are then combined into a single polynomial:</p>
<p>\(\varepsilon = \left( a_{0}+a_{1}s+a_{2}c \right) + \left( b_{0}+b_{1}s+b_{2}c \right) M_{v}+ \left( c_{0}+c_{1}s+c_{2}c \right) M_{v}^{2}\)after <xref ref-type="bibr" rid="R618">Hallikainen <italic>et al.,</italic> (1985)</xref> (106)</p>
<p>where, \(\varepsilon \) is dielectric constant, \(s\) and \(c\) are the percentage of sand and clay in a sample, and \(a_i\) , \(b_i\) and \(c_i\) are the frequency dependent coefficients. Further, <xref ref-type="bibr" rid="R646">Mohan<italic> et al.</italic> (2015)</xref> have given following equation for estimation of volumetric water content,\(V_{sm}\) in the soil.</p>
<p>\(V_{sm}=4.3x10^{-6}x \varepsilon _{r}^{&apos;3}-5.5x10^{-4}x \varepsilon _{r}^{&apos;2}+2.92x10^{-2}x \varepsilon _{r}^{&apos;}-5.3x10^{-2} \) after <xref ref-type="bibr" rid="R646">Mohan<italic> et al.</italic> (2015)</xref> (107)</p>
<p>This comparison of retrieved SM and backscatter coefficient does not require prior information about soil texture and surface roughness (<xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>).</p>
</sec>
<sec id="s6-19"><title>6.19 Artificial Neural Network:</title>
<p>Combination effect of soil parameters e.g. SM, roughness and vegetation cover on radar backscattering response make impact on SM retrievals (<xref ref-type="bibr" rid="R658">Paloscia <italic>et al.,</italic> 2010</xref>). Sensors at different frequencies, polarizations and incidence angles make it possible to estimate SM at optimal accuracy however, space-borne multi-frequency and multi-angle sensors satellites are limited in number. Therefore, SM can be estimated more precisely using the Neural Network Inversion (NNI) than the Multiple Regression (MR) approaches (<xref ref-type="bibr" rid="R710">Zhang <italic>et al.,</italic> 2016</xref>). It is more practical method estimates more optimal results of accuracy and stability in estimation of SM with speed (<xref ref-type="bibr" rid="R582">Barrett <italic>et al.,</italic> 2009</xref>; <xref ref-type="bibr" rid="R710">Zhang <italic>et al.,</italic> 2016</xref>). <xref ref-type="bibr" rid="R678">Santi <italic>et al.</italic> (2013)</xref> have used Artificial Neural Network based model for SM using ENVISAT/ASAR data and reported similar results to hydrological models. <xref ref-type="bibr" rid="R617">Hajj <italic>et al</italic>. (2016)</xref> have successfully used multi-layer perceptron Neural Networks (NNs) for SM retrievals based Levenberg–Marquardt optimization algorithm. <xref ref-type="bibr" rid="R657">Paloscia <italic>et al.</italic> (2008)</xref> have recommended this technique after comparison with other algorithms. They have used Bayes’ theorem and an iterative algorithm based on the Nelder-Mead direct-search method for preparation of two hidden layers for Feed Forward Artificial Neural Network (ANN) with statistical approach. However, enough ground data from study area is highly required for ANN training for reliable SM estimations (<xref ref-type="bibr" rid="R658">Paloscia <italic>et al.,</italic> 2010</xref>).</p>
<p>This approach has limited applicability for operational use for areas out of study area in both space and time and wide analyses and more tests in different geo-physical environment are required for global applicability (<xref ref-type="bibr" rid="R658">Paloscia <italic>et al.</italic> 2010</xref>). <xref ref-type="bibr" rid="R673">Sahebi <italic>et al.</italic> (2004)</xref> have used theoretical and empirical datasets at learning. The Bayesian and neural network methods have similar capability of estimating SM content. However, estimation error in SM products prepared using Bayesian method increases with increasing number of input parameters and error decreases using the neural network method for increasing the number of input parameters (<xref ref-type="bibr" rid="R710">Zhang <italic>et al.,</italic> 2016</xref>).</p>
</sec>
<sec id="s6-20"><title>6.20 Fusion Approach of SAR Data</title>
<p>Image fusion is the combination of two or more different images in new image using a specific algorithm for SM retrievals (<xref ref-type="bibr" rid="R639">Kurucu <italic>et al.,</italic> 2009</xref>). Scholars have fused images acquired: 1) active and passive sensors; 2) SAR and optical sensors; 3) SAR images acquired with different polarisation; and 4) SAR images acquired at different angle.</p>
<p>a) Combination of Radar and Radiometer Data</p>
<p>Scholars have reported excellent agreement of the SM estimated using combination of active and passive microwave remote sensing data with <italic>in situ SM </italic>measurements (<xref ref-type="bibr" rid="R596">Chauhan, 1997</xref>, <xref ref-type="bibr" rid="R608">Entekhabi <italic>et al.,</italic> 2010</xref>; <xref ref-type="bibr" rid="R695">Velde <italic>et al.,</italic> 2015</xref>; <xref ref-type="bibr" rid="R662">Patel and Srivastava, 2015</xref>). Radar data is available at high resolution but 1) influenced by surface roughness and vegetation structure, 2) water content and less sensitive to SM compared to radiometer and 3) algorithms for SM retrieval performs adequately only in low-vegetation water content conditions whereas radiometers like L-band are better sensitive to SM even in moderate vegetation and SM retrievals well established but the spatial resolution is relatively coarse. Advantages of Radar data and Radiometer data have been used to achieve high resolution and avoid individual limitations of both technologies of SM estimations i.e. SMAPL2_SM_A/P hydrometeorology product at 10 km resolution (<xref ref-type="bibr" rid="R608">Entekhabi <italic>et al.,</italic> 2010</xref>). Further, <xref ref-type="bibr" rid="R695">Velde <italic>et al. </italic>(2015)</xref> have combined L-band SAR (PALSAR) and VUA-NASA C-band AMSR-E data for SM retrieval in Netherlands. <xref ref-type="bibr" rid="R662">Patel and Srivastava (2015)</xref> have used the two-stage upscaling approach for analysis of the deviation of AMSR-E-derived SM from SAR-derived SM over Kuchh district of India.</p>
<p>b) SAR and Optical Data</p>
<p>Optical data is useful for estimations of biophysical parameter. Therefore, scholars like <xref ref-type="bibr" rid="R648">Morana <italic>et al.</italic> (2000)</xref>, <xref ref-type="bibr" rid="R639">Kurucu <italic>et al.</italic> (2009)</xref>, <xref ref-type="bibr" rid="R605">Du <italic>et al.</italic> (2010)</xref>, <xref ref-type="bibr" rid="R617">Hajj <italic>et al.</italic> (2016)</xref>, <xref ref-type="bibr" rid="R610">Filion <italic>et al.</italic> (2016)</xref>, etc. have combined SAR with optical data for operational mapping of SM over vegetated area. <xref ref-type="bibr" rid="R639">Kurucu <italic>et al.</italic> (2009)</xref> have used pixel based image fusion technique to combine C-band of Radarsat-1 with NIR of SPOT-2 image for SM estimations and suggested as useful technique for monitoring of SM as an alternative approach. <xref ref-type="bibr" rid="R605">Du <italic>et al.</italic> (2010)</xref> have used NDVI calculated using optical data of HJ. <xref ref-type="bibr" rid="R702">Wang <italic>et al. </italic>(2004)</xref> combined NDVI with differential backscatter coefficient to reduce roughness effects. <xref ref-type="bibr" rid="R674">Said <italic>et al.</italic> (2012)</xref> was found LAI as the best descriptor to minimize the effects of vegetation on SM retrieval from SAR images. Bai and He (2016) have suggested EVI and LAI for parameterization however, optical sensors are susceptible to cloud. However, fusion SAR images with optical images leads to more difficulties in co-registration at high resolution and suggested block registration technique (<xref ref-type="bibr" rid="R709">Zhang, 2010</xref>). <xref ref-type="bibr" rid="R610">Filion <italic>et al.</italic> (2016)</xref> have suggested integration of types of SAR and optical sensors for better SM retrievals.</p>
<p>c) Combination of Polarized Data</p>
<p><xref ref-type="bibr" rid="R659">Paloscia<italic> et al. </italic>(2005)</xref> have used Bayesian approach for SM retrieval from \(\sigma^{0}\) at C-band in HH and VV polarization. Focus was on the retrieval of the dielectric constant of soil to be estimated by means of the <xref ref-type="bibr" rid="R604">Dobson <italic>et al.</italic> (1985)</xref> model. <xref ref-type="bibr" rid="R581">Barber <italic>et al.</italic> (2016)</xref> have used Bayesian algorithm to enhance field-based retrievals of SM using: 1) Co-polarized backscattering coefficients- \(HH\) and \(VV\); and 2) V-polarized brightness temperature. They have reported overall improvement in SM estimations. Further, Zribi <italic>et al.</italic> (2007) have estimated (108) soil moisture using different polarization e.g. \(HH\) and \(VV\):</p>
<p>\(V_{sm}=\frac{V_{smHH}+V_{smVV}}{2}\) after Zribi <italic>et al.</italic> (2007) (108)</p>
<p>It is average of pixel-by-pixel estimated SM. A combination two images acquired at low and high incidence angles is suggested for SM estimations at mix of terrain types like low relief agricultural fields and high relief mountainous areas (<xref ref-type="bibr" rid="R650">Narayanan <italic>et al.,</italic> 1999</xref>)</p>
</sec>
<sec id="s6-21"><title>6.21 Change Detection Technique</title>
<p>Change detection approach has been suggested for SM analysis and monitoring, if long time-series data is not available (<xref ref-type="bibr" rid="R652">Necsoiu <italic>et al.,</italic> 2013</xref>). Change detection techniques assume that SM changes within short time compare to surface roughness and vegetation (<xref ref-type="bibr" rid="R622">Hornáček <italic>et al.,</italic> 2012</xref>). It is pixel to pixel comparison of two backscattering images. <xref ref-type="bibr" rid="R647">Moran <italic>et al.</italic> (2004)</xref> have been used NBMI for change detection of SM. <xref ref-type="bibr" rid="R584">Bazi <italic>et al.</italic> (2005)</xref> have used this technique for SM retrieval using multi-temporal SAR images. Soil moisture change is the ratio between change in soil moisture detected for radar backscatter captured at time first (\(t_1\)) and time second (\(t_2\)). Therefore, it can be expressed as ratio (109) of Fresnel reflectivity from multi-temporal observations at vertical polarization (\(R_V\)):</p>
<p>\(\frac{R_{V} ( t_{2} ) }{R_{V} (_{1} )}\) (109)</p>
<p><xref ref-type="bibr" rid="R707">Yang <italic>et al.</italic> (2006)</xref> have calculated changes in SM using following model (110) after elimination of vegetation effect in radar backscatter as:</p>
<p>\(\frac{V_{sm} \left( t1 \right) }{V_{sm} \left( t2 \right) }= \{ \frac{1}{c}\frac{ \sigma _{HH}^{s} \left( t1 \right) }{ \alpha ^{*} \left[ \sigma _{HH}^{s} \left( t2 \right) \right] ^{ \beta }} \} ^{1/d}\) after <xref ref-type="bibr" rid="R707">Yang <italic>et al.</italic> (2006)</xref> (110)</p>
<p>where, \(\sigma _{HH}^{s} \) is the \(HH\) polarized backscattering coefficients (dB), \(\alpha \) and \(\beta \) are parameters, \(c\) and \(d\) are parameters established by using the simulated data of soil type, \(V_{sm}\) is volumetric soil moisture, \(t\) is time. For details refer <xref ref-type="bibr" rid="R707">Yang <italic>et al.</italic> (2006)</xref>. <xref ref-type="bibr" rid="R664">Pathe <italic>et al.</italic> (2009)</xref> have used following change detection model (111) based on empirical backscatter parameters and the relative surface SM:</p>
<p>\( \sigma ^{0} \left( \theta ,t \right) = \sigma _{dry}^{0} \left( \theta ,t \right) +S \left( t \right) V_{sm} \left( t \right)\) after <xref ref-type="bibr" rid="R664">Pathe <italic>et al.</italic> (2009)</xref> (111)</p>
<p>where, \(\theta \) is incidence angel, \(t\) is time, \(\sigma _{dry}^{ {\circ}}\) backscattering from dry surface, \(S\) is the sensitivity of the backscattering coefficient \(\sigma ^{0}\) to changes in SM. Further, <xref ref-type="bibr" rid="R605">Du <italic>et al.</italic> (2010)</xref> have composed simple formula (112) to estimate SM changes using HJ SAR data based on simplified scattering models from vegetation and soil.</p>
<p>\(\frac{ \sigma _{VV \_ total}^{0} \left( t_{2} \right) - \sigma _{VV \_ veg}^{0}~ \left( t_{2} \right) } { \sigma _{VV \_ total}^{0} \left( t_{1} \right) - \sigma _{VV \_ veg}^{0}~ \left( t_{1} \right)}\) after <xref ref-type="bibr" rid="R605">Du <italic>et al.</italic> (2010)</xref> (112)</p>
<p>where, \(\sigma _{VV \_ total}^{0} \) is total backscatter at \(VV\) polarization from vegetated soil, \(\sigma _{VV \_ veg}^{0} \) is backscatter at \(VV\) polarisation from vegetation, and \(t_1\) and \(t_2\) are time for data acquisition. <xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> (2015)</xref> have proposed simple change detection technique (113) for the spatial resolution of the TerraSAR-X radar sensor. They have considered Negligible Roughness Effect for change detection using consecutive radar backscatter images of TerraSAR-X image as:</p>
<p>\(\Delta \sigma ^{{0} }=S_{0} \vert \Delta V_{sm}\) after <xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> (2015)</xref> (113)</p>
<p>and pixel level estimations (114) as:</p>
<p>\(\Delta V_{sm,x}=\frac{ \Delta \sigma _{x}^{0}}{S_{0}}\) after <xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> (2015)</xref> (114)</p>
<p>Further, they have expressed (115) these changes with considering roughness effect as:</p>
<p>\(\Delta V_{sm,x}=\frac{ \Delta \sigma _{x}^{0}- \Delta f \left( R \right) }{S_{0}}\) after <xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> (2015)</xref> (115)</p>
<p>They considered only moisture variations during the studied period and influence of temporal changes in roughness. This technique is applicable for bare soil class identified using optical data (<xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> 2015</xref>). Further, <xref ref-type="bibr" rid="R688">Tomer <italic>et al.</italic> (2015)</xref> have detected SM using change detection technique (116) as:</p>
<p>\(RSM_{i,t}=\frac{BC_{i,t}-BC_{i,dry}}{BC_{i,wet}-BC_{i,dry}}\) <xref ref-type="bibr" rid="R688">Tomer <italic>et al.</italic> (2015)</xref> (116)</p>
<p>\(RSM\) is relative SM. \(BC_{i,wet}\) and \(BC_{i,dry}\) are observed highest and lowest backscattering values in the image. <xref ref-type="bibr" rid="R616">Gorrab <italic>et al.</italic> (2015</xref>) have used linear relationship model (117) for change detection of SM using TerraSAR-X data as:</p>
<p>\(\sigma _{dB}^{0}=S_{0}SM+f \left( R \right)\) <xref ref-type="bibr" rid="R616">Gorrab <italic>et al. </italic>(2015)</xref> (117)</p>
<p>where, \(S_0\) is the signal’s sensitivity to SM and \(f(R)\) is a function of the roughness.</p>
<p>The curvelet-based approach to change detection has been successfully adopted to polarimetric SAR data. <xref ref-type="bibr" rid="R592">Brisco <italic>et al.</italic> (2013)</xref> have used this approach, polarimetric SAR data for analysis of flooded vegetation in China. This approach allows estimations of bare SM using multi-temporal radar with one incidence angle and one polarization (<xref ref-type="bibr" rid="R616">Gorrab <italic>et al.,</italic> 2015</xref>).</p>
</sec>
<sec id="s6-22"><title>6.22 Correlation Coefficient</title>
<p>The correlation measures the changes of scattering characteristics of the ground surface recorded on two SAR images (<xref ref-type="bibr" rid="R641">Lu and Meyer, 2002</xref>). Scholars like <xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.</italic> (2011)</xref> and <xref ref-type="bibr" rid="R682">Singh and Venkataraman (2010)</xref> have used co-polarization correlation coefficient for analysis of surface roughness. It is complex amplitude of VV and HH channels (<xref ref-type="bibr" rid="R682">Singh and Venkataraman, 2010</xref>). Co-polarized correlation coefficient estimated for VV, HH channels captured at 30° incidence angle by RADARSAT-2 interprets function of crop height and crop type (<xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.,</italic> 2011</xref>).</p>
<p>\(p_{VV,HH}=\frac{ \vert \langle S_{HH}S_{VV}^{*} \rangle }{\sqrt[]{ \vert S_{HH} \vert ^{2} \vert S_{VV} \vert ^{2}}}\) (118)</p>
<p>where, \(S\) is soil surface roughness. It helps to reduce vegetation effect on SM retrievals using semi-empirical and WCM. Higher bias shows significant correlation coefficient and suggests the scaling effect of the relative SM into the absolute SM.</p>
</sec>
<sec id="s6-23"><title>6.23 Principal Component Analysis (PCA)</title>
<p>Principal component analysis (PCA) can orthogonalize the multi-channel and multi-date datasets based on components generated from an eigenvector-derived factor-loading matrix (Rogan and Chen, 2004). The factor-loading matrix is based on correlation matrix approach (standardized) or based on the variance-covariance matrix. The first component is representative of the overall multiple channels variance and higher components (i.e. PC2, PC3, etc.) are representative of changes in image variance between the channels. The first component, PC1 represents the temporal changes (<xref ref-type="bibr" rid="R584">Bazi <italic>et al.</italic> 2005</xref>).</p>
<p>PCA have distinct advantage for SM retrievals using SAR data with good preforms at high degree of autocorrelation (<xref ref-type="bibr" rid="R671">Romshoo and Musiake, 20004</xref>). <xref ref-type="bibr" rid="R637">Kong and Dorling (2008)</xref> have used PCA to retrieve near-surface soil moisture from ASAR data. It transforms the effect of surface roughness, land cover, vegetation, and topography within the limit of datasets used. <xref ref-type="bibr" rid="R637">Kong and Dorling (2008)</xref> have reported PC2 as an indicator on SM. <xref ref-type="bibr" rid="R590">Bourgeau-Chavez <italic>et al.</italic> (2007)</xref> have used formula after the Jensen (1996) to calculate the PCA:</p>
<p>\(R_{kp}=\frac{a_{kp}*\sqrt[]{ \lambda _{p}}}{\sqrt[]{Var_{k}}}\) after <xref ref-type="bibr" rid="R590">Bourgeau-Chavez <italic>et al.</italic> (2007)</xref> (119)</p>
<p>where, \(a_{kp}\)is eigenvector for image date \(k \) and component \(p\) , \(\lambda _{p}\) is eigenvalue for component \(p\), and \(Var_{k}\) is variance of image date \(k \) in the covariance matrix. This was applied to each time series of image sets to create seasonal SM index. The map was validated based on rainfall, Fire Weather Index data, and situ moisture measurements. PCA works better for high degree of temporal autocorrelation (<xref ref-type="bibr" rid="R671">Romshoo and Musiake, 2004</xref>). Further, they have reported potential PCA for mapping soil drainage in burned lands. However, the technique is based on only the statistical properties of the data. Water holding capacities and dielectric properties vary according to soil texture therefore PAC cannot directly estimate absolute SM (<xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>). It is difficult to generalize the interpretation of PCA axis to other datasets, different times and different areas (Bhagat, 2012).</p>
<p>6.24 Individual Date Soil Moisture Mapping Procedure</p>
<p>The individual date model consists of parametric methods including Pearson correlation and linear and polynomial regression development (<xref ref-type="bibr" rid="R590">Bourgeau-Chavez <italic>et al.,</italic> 2007</xref>). It is fully based on in-situ SM measurements and ERS-2 SAR backscatter. This method is useful tool for assessment of hydrologic condition of burned boreal forests worldwide underlain by deep organic layers.</p>
</sec>
</sec>
<sec id="s7"><title>Stability Analysis</title>
<sec id="s7-1"><title>7.1 Temporal Stability Analysis</title>
<p><xref ref-type="bibr" rid="R672">Rötzer <italic>et al.</italic> (2015)</xref> have analyzed the temporal stability (120) of SM products using spatial mean SM(\( \bar{\theta} \left( t \right)\)) with the help of method suggested by <xref ref-type="bibr" rid="R693">Vachaud <italic>et al.</italic> (1985)</xref>.</p>
<p>\(​​​​\bar{\theta} \left( t \right) =\frac{1}{N} \sum _{n=1}^{N} \theta _{n,t}\) (120)</p>
<p>where, \(n\) is number of pixels and \(t\) is time. Relative difference \(\delta _{n,t}\) is estimated SM values \(\theta _{n,t}\) for every pixel (121).</p>
<p>\(\delta _{n,t}=\frac{ \theta _{n,t}- \theta \left( t \right) }{ \theta \left( t \right)}\) (121)</p>
<p>Mean relative deference (122) is calculated over all time steps for ever pixel using:</p>
<p>\(\delta \left( n \right) =\frac{1}{T} \sum _{n=1}^{T} \delta _{n,t}\) (122)</p>
<p>Dry soils show a low mean relative difference (MRD) and wet soil higher values. These values are arranged in ascending order for every SM product and the correlation was performed for different climatic region.</p>
<p><xref ref-type="bibr" rid="R698">Wagner <italic>et al.</italic> (2008)</xref> have estimated the coefficients \(a\) and \(b\) of the backscatter scaling model from SAR image for selected time periods \((t- \Delta t/2, t+ \Delta t/2)\). Temporal Stability (123) of SM and Radar Backscatter has been observed by the ASAR as:</p>
<p>\(c_{lr} \left( x,y \right) =\frac{a \left( x,y,t \right) +b \left( x,y,t \right) \sigma _{dry,l}^{0} \left( t \right) - \sigma _{dry,l}^{0} \left( x,y,t \right) }{S_{l} \left( x,y,t \right) }\)</p>
<p>\(d_{lr} \left( x,y \right) =b \left( x,y,t \right) \frac{S_{r} \left( t \right) }{S_{l} \left( x,y,t \right)}\) (123)</p>
<p>The coefficient \(c_{lr}\) indicates the competitive status of SM as drier or wetter that the surrounding region and coefficient \(d_{lr}\) gives the information about the relative SM changes in the selected period.</p>
</sec>
<sec id="s7-2"><title>7.2 Spatial Variability</title>
<p>Spatial distribution of SM has been estimated using approach of <xref ref-type="bibr" rid="R645">Mittelbach and Seneviratne (2012)</xref> and spatial variance (\(\sigma ^{2} \left( t \right)\)) decomposed into its time-varying and time-invariant contributors using the modified equation (124):</p>
<p>\(\sigma ^{2} \left( t \right) = \sigma ^{2} \left( \theta \left( n \right) \right) +2cov~ \left( \theta \left( n \right) A_{n,t} \right) + \sigma ^{2} \left( A_{n,t} \right)\) (124)</p>
<p>where, \(\sigma ^{2} ( \theta ( n))\) is the variance of the temporal mean, \(cov~ \left( \theta \left( n \right) A_{n,t} \right)\) is the sum of the covariance between temporal mean and anomalies, and the variance of anomalies is \(\sigma ^{2} \left( A_{n,t} \right)\). Spatial standard deviation (<xref ref-type="bibr" rid="R672">Rötzer et al. 2015</xref>) of SM changes as a power of the extent scale (125) as:</p>
<p>\(\sigma ^{2} \left( t \right) =b*a^{ \mu }\) (125)</p>
<p>where, \(a\) is the area of the respective extent scale, \(\mu \) is a fractal power and \(b\) is a parameter.</p>
<p><xref ref-type="bibr" rid="R662">Patel and Srivastava (2015)</xref> have compared SAR derived SM with AMSR-E-derived SM to estimate the bias (126) as:</p>
<p>\(Bias= \mu \left( SAR-derived~SM \right) - \mu \left( AMSR-E-derived~SM \right)\) after <xref ref-type="bibr" rid="R662">Patel and Srivastava (2015)</xref> (126)</p>
<p>Estimated bias is depend on vegetation water content.</p>
</sec>
</sec>
<sec id="s8"><title>Current And Future Developments</title>
<p>Space-borne active microwave remote sensing is an efficient technique to acquire knowledge of land surface soil moisture (SM). Several studies have reported comparable results of surface SM using space-borne scatterometer responses to backscattering from soil layer. However, detection and measuring of SM using these techniques require an appropriate filtering of data, site-specific calibration of surface roughness parameters, prior knowledge of the study area, specific research purpose, careful selection of model, different suitable datasets with appropriate time series, etc. Reported success studies are very site-, data- and situation-specific and show uncertainty of models in SM estimations therefore, insufficient to reach global conclusions and applications. Scientific challenge before the community is to develop or modify models and appropriate datasets for SM estimations with simplification and high precision with global applicability for complex bio-physical units. The field is new, active, attractive, challenging and interesting area of research for sustainable land and climate change management.</p>
<list list-type="order">
<list-item><p>Active microwave sensors perform better than passive microwave sensors for estimations of near-surface SM (<xref ref-type="bibr" rid="R700">Wanders <italic>et al.,</italic> 2012</xref>).</p>
</list-item>
<list-item><p>The Radars, SAR provides high-resolution SM data with poor temporal resolution (<xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>) and more sensitivity to surface roughness and vegetation scattering (<xref ref-type="bibr" rid="R588">Blumberg <italic>et al.,</italic> 2002</xref>; <xref ref-type="bibr" rid="R647">Moran <italic>et al.,</italic> 2004</xref>; <xref ref-type="bibr" rid="R639">Kurucu <italic>et al.,</italic> 2009</xref>; <xref ref-type="bibr" rid="R701">Wang, 2009</xref>; <xref ref-type="bibr" rid="R608">Entekhabi <italic>et al.,</italic> 2010</xref>). Therefore, needs scientific and technological improvements for operational use (<xref ref-type="bibr" rid="R627">Jeu <italic>et al.,</italic> 2008</xref>).</p>
</list-item>
<list-item><p>PALSAR data has been reported as the most cost effective compared to ASAR versus RADARSAT at \(VV\) polarization (<xref ref-type="bibr" rid="R676">Sanli <italic>et al.,</italic> 2008</xref>).</p>
</list-item>
<list-item><p>Fully polarimetric space-borne SAR sensors, (e.g., ALOSPALSAR, TerraSAR-X and Radarsat-2) with L-, X-, and C-bands are very promising sources for SM estimations (<xref ref-type="bibr" rid="R582">Barrett <italic>et al.,</italic> 2009</xref>).</p>
</list-item>
<list-item><p>Short wavelengths are more sensitivity to soil roughness and vegetation (<xref ref-type="bibr" rid="R658">Paloscia <italic>et al.,</italic> 2010</xref>; <xref ref-type="bibr" rid="R588">Blumberg <italic>et al.,</italic> 2002</xref>; <xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>).</p>
</list-item>
<list-item><p>Cross-polarized data is useful for analyzing the contribution of vegetation in the total radar backscattering (<xref ref-type="bibr" rid="R652">Necsoiu <italic>et al</italic>., 2013</xref>). It is suggested for effective applicability of IEM for SM retrievals (<xref ref-type="bibr" rid="R577">Baghdadi <italic>et al.,</italic> 2006</xref>).</p>
</list-item>
<list-item><p>Co-polarization, \(VV\) channel of ASAR data is more affected by vegetation and less suitable for SM retrievals (<xref ref-type="bibr" rid="R661">Pasolli <italic>et al.,</italic> 2014</xref>).</p>
</list-item>
<list-item><p>More studies should be conducted to include multi-polarization and multi-incidence angle radar configured data over deferent geo-physical conditions before recommendations for operational use (<xref ref-type="bibr" rid="R674">Said <italic>et al.,</italic> 2012</xref>).</p>
</list-item>
<list-item><p>SAR unable to provide suitable datasets with appropriate time series (<xref ref-type="bibr" rid="R582">Barrett <italic>et al.,</italic> 2009</xref>).</p>
</list-item>
<list-item><p>The radar signal are less sensitive to very wet soils (SM &gt; 35 %) and difficult to accurately map of these soils (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2008</xref>). ASAR data have a limited capability to identify extreme moisture conditions (<xref ref-type="bibr" rid="R661">Pasolli <italic>et al.,</italic> 2014</xref>).</p>
</list-item>
<list-item><p>Backscattering ratio like BR, NBMI are useful for generalizing the relationships between radar backscatter and VSM between 0 and 40%. However, empirical assessments are suggested prior to applications for over large areas (<xref ref-type="bibr" rid="R681">Shoshany <italic>et al.,</italic> 2000</xref>).</p>
</list-item>
<list-item><p>SAR shows promising results of SM retrievals however, they give good results with particular range of incidence angle, to bare soil or grassland areas and can only penetrate the soil surface layer (<xref ref-type="bibr" rid="R585">Bertoldi <italic>et al.</italic>, 2014</xref>) therefore, further research with more complex spatially-explicit models has been suggested (<xref ref-type="bibr" rid="R678">Santi <italic>et al</italic>., 2013</xref>).</p>
</list-item>
<list-item><p>Empirical models are useful to estimate the precise SM within the calibrated conditions (<xref ref-type="bibr" rid="R577">Baghdadi <italic>et al</italic>., 2006</xref>; <xref ref-type="bibr" rid="R701">Wang, 2009</xref>) therefore, further studies are recommended for modification in models for wide applicability (<xref ref-type="bibr" rid="R569">Al-Bakri <italic>et al.</italic>, 2014</xref>).</p>
</list-item>
<list-item><p>Empirical models need field measurements for calibration and field measurements are not possible in cases of emergencies (<xref ref-type="bibr" rid="R591">Braun and Hochschild, 2017</xref>).</p>
</list-item>
<list-item><p>Radar backscatters are not only sensitive to soil dielectric constant but also geometric surface of the soil. These relationships have been analyzed in several studies however, the empirical models are very site specific and lack of full understanding of surface geometry for global applicability (<xref ref-type="bibr" rid="R697">Wagner <italic>et al.,</italic> 2007</xref>).</p>
</list-item>
<list-item><p>Theoretical models require surface roughness data and measurements of surface roughness are very time-consuming (<xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>).</p>
</list-item>
<list-item><p>The roughness, vegetation, topography and SM effects on radar response can be separated using multi-frequency or -polarization measurements (<xref ref-type="bibr" rid="R637">Kong and Dorling, 2008</xref>).</p>
</list-item>
<list-item><p>De-polarization models are more sensitive to vegetation cover which disturbing accuracy of the SM (<xref ref-type="bibr" rid="R614">Gherboudj <italic>et al.,</italic> 2011</xref>).</p>
</list-item>
<list-item><p>LAI and RVI are best descriptor to minimize the effect of vegetation on SM retrieval from SAR images using Water Cloud Model (<xref ref-type="bibr" rid="R674">Said <italic>et al</italic>., 2012</xref>; <xref ref-type="bibr" rid="R708">Yue <italic>et al.,</italic> 2016</xref>).</p>
</list-item>
<list-item><p>Calibration based models are very sit-specific and not useful to extrapolate for different bio-physical units (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2008</xref>).</p>
</list-item>
<list-item><p>Surface roughness modelling is impractical due to heterogeneity between various fields (<xref ref-type="bibr" rid="R686">Srivastava <italic>et al.</italic>, 2015</xref>)</p>
</list-item>
<list-item><p>Comprehensive assessment needs for analysis of roughness problems to avoid uncertainties of the SM retrievals (<xref ref-type="bibr" rid="R696">Verhoest <italic>et al.,</italic> 2008</xref>).</p>
</list-item>
<list-item><p>The incorporation of topography effect in radar scattering models has been recommended for precise estimations of SM using radar data in hilly regions (<xref ref-type="bibr" rid="R594">Burgin <italic>et al.,</italic> 2016</xref>).</p>
</list-item>
<list-item><p>EM models should be developed and validated for monitoring SM over frozen ground (<xref ref-type="bibr" rid="R652">Necsoiu <italic>et al.</italic>, 2013</xref>).</p>
</list-item>
<list-item><p>Reported causes of uncertainties is SM estimations are incorrect weather forcing, model parameter uncertainty, and incorrect land surface model formulation (<xref ref-type="bibr" rid="R665">Pellarin <italic>et al.,</italic> 2009</xref>). Therefore, they fail to provide results with good agreement with experimental observations (<xref ref-type="bibr" rid="R601">Das and Paul, 2015</xref>).</p>
</list-item>
<list-item><p>Results of SM retrieval models vary region to region and can’t be transfer to other regions and require testing different environmental conditions for wide applicability with optimal accuracy (<xref ref-type="bibr" rid="R658">Paloscia <italic>et al.</italic>, 2010</xref>; <xref ref-type="bibr" rid="R672">Rötzer <italic>et al.,</italic> 2015</xref>).</p>
</list-item>
<list-item><p>The land surface models are unable to reproduce the rapid dynamics of the near-surface SM at the local and regional scales (<xref ref-type="bibr" rid="R665">Pellarin <italic>et al.,</italic> 2009</xref>).</p>
</list-item>
<list-item><p>Roughness and moisture inversion models are not valid for SM retrievals (<xref ref-type="bibr" rid="R712">Zribi <italic>et al.,</italic> 2002</xref>).</p>
</list-item>
<list-item><p>SAR data acquired in wet season have shown poor relationship with SM (<xref ref-type="bibr" rid="R677">Sano <italic>et al.,</italic> 1998</xref>).</p>
</list-item>
<list-item><p>Simulation of backscattering models depend on roughness description and not satisfactory (<xref ref-type="bibr" rid="R712">Zribi <italic>et al.,</italic> 2002</xref>).</p>
</list-item>
<list-item><p>Linear models require calibration, neglecting roughness and suggested for SM modeling over large area (<xref ref-type="bibr" rid="R712">Zribi <italic>et al.,</italic> 2002</xref>).</p>
</list-item>
<list-item><p>It is difficult to extent the modeling techniques for SM mapping over complex large agricultural area (<xref ref-type="bibr" rid="R686">Srivastava <italic>et al.,</italic> 2015</xref>)</p>
</list-item>
<list-item><p>Well specified research objectives, prior knowledge about the major impact factors and conditions of the study area required for pricise estimations of SM (<xref ref-type="bibr" rid="R582">Barrett <italic>et al.,</italic> 2009</xref>).</p>
</list-item>
<list-item><p>Many scholars have noted need of further research to develop a higher spatio-temporal-resolution for monitoring the surface elements at short-term and small spatial-scales like SM (<xref ref-type="bibr" rid="R643">Liu <italic>et al.,</italic> 2017</xref>)</p>
</list-item>
<list-item><p>Upcoming research should be focused on intensive applications in humanitarian action, robust and automatic analysis with precise and reliable services, short response time for emergency scenarios, improvement in user’s accuracy for human applications, collaboration between scientists and users for minimizing limitations of applications, participation of users will specify their needs, contribute for calibration and validation to improve quality of products (<xref ref-type="bibr" rid="R591">Braun and Hochschild, 2017</xref>).</p>
</list-item>
</list>
</sec>
</body>
<back>
<ack>
<title>Acknowledgements</title>
<p>Author gratefully acknowledges the anonymous reviewers for constructive comments and suggestions for improvement in the draft.</p>
</ack>
<glossary>
<title>Abbreviations</title>
<p><bold>MW</bold>: Microwave; <bold>SM</bold>: Soil Moisture; <bold>RS</bold>: Remote Sensing; <bold>RMS</bold>: Root Mean Square; <bold>AMWRS</bold>: Active Microwave Remote Sensing; \(e\): Microwave emissivity; \(f\): Function; L, C, K, X, S: Microwave bands; \(⋌\): Wavelength;<italic>θ</italic>: Incidence angle; \(\tau^{}\): Attenuation of the vegetation; \(\varepsilon \): Complex dielectric constant; \(\omega \): Signal-scattering albedo; <bold>P</bold>: Polarization; <bold>V</bold>: Vertical polarization; <bold>H</bold>: Horizontal Polarization; <bold>R</bold>: Roughness term; \(s\): Soil surface; \(h_{rms}\): Root Means Squared Height; <bold>DN</bold>: Digital Number; \(V_{sm}\): Volumetric soil moisture;\(G_{sm}\): Gravimetric soil moisture; \(l\): Correlation length; \(\tau^{2}\): Two-way attenuation of the vegetation; \(\sigma ^{ {\circ} }\): Backscattering coefficient; <bold>a, b, c</bold>: Empirical coefficients; \(t_{1,2,...}\); Time one, two, …; dry: <bold>Dry</bold> <bold>soil</bold>; wet: Wet soil; \(veg\): Vegetation; \(int\): Multiple scattering from the vegetation and ground surface; <bold>SAR</bold>: Synthetic Aperture Radar ; <bold>ASAR</bold>: Advanced Synthetic Aperture Radar; <bold>PALSAR</bold>: Phased Array type L-band Synthetic Aperture Radar; <bold>TDR</bold>: Time Domain Reflectometry; <bold>DEM</bold>: Digital Elevation Model; <bold>BR: </bold>Backscatter Ratio; <bold>RVI: </bold>Radar Vegetation Index; <bold>NBMI</bold>: Normalized Radar Backscatter Soil Moisture Index; <bold>IDR</bold>: Image Difference Ratio; <bold>IEM: </bold>Integral Equation Model; <bold>DACIEM: </bold>Dual-angle Configured Integral Equation Model; <bold>EM</bold>: Empirical Model; <bold>LM: </bold>Linear Model; <bold>NLM: </bold>Nonlinear Model; <bold>LSA: </bold>Least Square Analysis; <bold>DM: </bold>Dubois Model; <bold>EA-IEM</bold>: Empirically Adopted Integral Equation Model; <bold>ANN: </bold>Artificial Neural Network; <bold>NN: </bold>Neural Network; <bold>NDVI</bold>: Normalized Difference Vegetation Index : SWI: Soil Wetness Index; <bold>PCA</bold>; Principal Components Analysis; <bold>WCM: </bold>Water Cloud Model.</p>
</glossary>
<fn-group>
<fn fn-type="coi-statement">
<p>The author declares no conflict of interest.</p>
</fn>
</fn-group>
<ref-list>
<title>References</title>
<ref id="R569"><mixed-citation>Al-Bakri, J., Suleiman, A. and Berg , A., 2014. A comparison of two models to predict soil moisture from remote sensing data of RADARSAT 2. <italic>Arab J Geosci</italic>, 7(11), 4851-4860. <pub-id pub-id-type="doi">10.1007/s12517-013-1115-y</pub-id></mixed-citation></ref>
<ref id="R570"><mixed-citation>Albergel, C., Rudiger, C., Carrer, D., Calvet, J. C., Fritz , N., Naeimi, V., Bartalis, Z. and Hasenauer, S., 2009. An evaluation of ASCAT surface soil moisture products with in-situ observations in southwestern France. <italic>Hydrol. Earth Syst. Sci.</italic>, 13, 115-124.</mixed-citation></ref>
<ref id="R571"><mixed-citation>Alvarez<bold>-</bold>Mozos, J., Gonzalez<bold>-</bold>Audicana, M., Casali, J. and Larranaga, A., 2008. Effective versus measured correlation length for radar<bold>-</bold>based surface soil moisture retrieval. <italic>Int. J. Remo. Sens.</italic>, 29(17-18), 5397-5408. <pub-id pub-id-type="doi">10.1080/01431160802036367</pub-id></mixed-citation></ref>
<ref id="R572"><mixed-citation>Attema, E. and Ulaby, F., 1978. Vegetation modeled as a water cloud. <italic>Radio Science</italic>, 13, 357-364. <pub-id pub-id-type="doi">10.1029/RS013i002p00357</pub-id></mixed-citation></ref>
<ref id="R573"><mixed-citation>Aubert, M., Baghdadi, M., Zribi, M., Ose, K., Hajj, M.E., Vaudour, E., and Gonzalez-Sosa, E., 2013. Toward an operational bare soil moisture mapping using TerraSAR-X data acquired over agricultural areas. <italic>IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing</italic>, 6 (2), 900-916. <pub-id pub-id-type="doi">10.1109/JSTARS.2012.2220124</pub-id></mixed-citation></ref>
<ref id="R574"><mixed-citation>Baghdadi, N., Gherboudj, I., Zirbi, M., Sahebi, M., King, C. and Bonn, F., 2004. Semi-empirical calibration of the IEMbackscatteringmodel using radar images and moisture and roughness field measurements. <italic>Int. J. Remo. Sens.</italic>, 25, 3593-3623. <pub-id pub-id-type="doi">10.1080/01431160310001654392</pub-id></mixed-citation></ref>
<ref id="R575"><mixed-citation>Baghdadi, N., Cerdan, O., Zribi, M., Auzet, V., Darboux, F., El Hajj, M. and Bou Keir, R., 2008. Operational performance of current synthetic aperture radar sensors in mapping soil surface characteristics: application to hydrological and erosion modelling. <italic>Hydrological Processes, </italic>22(1), 9-20. <pub-id pub-id-type="doi">10.1002/hyp.6609</pub-id></mixed-citation></ref>
<ref id="R576"><mixed-citation>Baghdadi, N., Dubois-Fernandez, P., Dupuis, X. and Zribi, M., 2013. Sensitivity of main polarimetric parameters of multifrequency polarimetric sar data to soil moisture and surface roughness over bare agricultural soils. <italic>IEEE Geoscience and Remote Sensing Letters</italic>, 2013, 10 (4), 731-735. <pub-id pub-id-type="doi">10.1109/LGRS.2012.2220333</pub-id></mixed-citation></ref>
<ref id="R577"><mixed-citation>Baghdadi, N., Holah, N. and Zribi, M., 2006. Calibration of the Integral Equation Model for SAR data in C-band and HH and VV polarizations. <italic>Int. J. Remo. Sens.</italic>, 27(4), 805-816. <pub-id pub-id-type="doi">10.1080/01431160500212278</pub-id></mixed-citation></ref>
<ref id="R578"><mixed-citation>Baghdadi, N., Zribi, M., Paloscia, S., Verhoest, N. E. C., Lievens, H., Baup, H. and Mattia, F., 2015. Semi-Empirical Calibration of the Integral Equation Model for Co-Polarized L-Band Backscattering. <italic>Remote Sens</italic>, <italic>7</italic>, 13626-13640. <pub-id pub-id-type="doi">10.3390/rs71013626</pub-id></mixed-citation></ref>
<ref id="R579"><mixed-citation>Bai, X. and He, B., 2015. Potential of Dubois model for soil moisture retrieval in prairie areas using SAR and optical data. Int. J. Rem. Sens., 36(22), 5737-5753 <pub-id pub-id-type="doi">10.1080/01431161.2015.1103920</pub-id> <ext-link ext-link-type="uri" xlink:href="http://www.tandfonline.com/doi/abs/10.1080/01431161.2015.1103920?journalCode=tres20">http://www.tandfonline.com/doi/abs/10.1080/01431161.2015.1103920?journalCode=tres20</ext-link></mixed-citation></ref>
<ref id="R580"><mixed-citation>Bai, X., He, B., Xing, M. and Li, X. 2015. Method for soil moisture retrieval in arid Prairie using Terrasar-X data. <italic>Journal of Applied Remote Sensing</italic>, 9, 096062.</mixed-citation></ref>
<ref id="R581"><mixed-citation>Barber, M.<italic>, </italic>Bruscantini, C.<italic>, </italic>Grings, F. and Karszenbaum, H., 2016. Bayesian combined active/passive (B-CAP) soil moisture retrieval algorithm. <italic>IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing</italic>, 9(12), 5449-5460. <pub-id pub-id-type="doi">10.1109/IGARSS.2015.7325687</pub-id></mixed-citation></ref>
<ref id="R582"><mixed-citation>Barrett, B.W., Dwyer, E. and Whelan, P., 2009. Soil moisture retrieval from active spaceborne microwave observations: an evaluation of current techniques. <italic>Remote Sens.</italic> 1, 210-242. <pub-id pub-id-type="doi">10.3390/rs1030210</pub-id></mixed-citation></ref>
<ref id="R583"><mixed-citation>Baup, F., Mougin, E., de Rosnay, P., Timouk, F. and Chênerie, I., 2007. Surface soil moisture estimation over the AMMA Sahelian site in Mali using ENVISAT/ASAR data. <italic>Remote Sensing of Environment</italic>, 109(4), 473-481. <pub-id pub-id-type="doi">10.1016/j.rse.2007.01.015</pub-id></mixed-citation></ref>
<ref id="R584"><mixed-citation>Bazi, Y., Bruzzone, L. and Melgani, F., 2005. An unsupervised approach based on the generalized Gaussian Model to automatic change detection in multitemporal SAR images. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 43(4), 874-887. <pub-id pub-id-type="doi">10.1109/TGRS.2004.842441</pub-id></mixed-citation></ref>
<ref id="R585"><mixed-citation>Bertoldi, G., Chiesa, S.D, Notarnicola, C., Pasolli L., Niedrist, G. and Tappeiner, U., 2014. Estimation of soil moisture patterns in mountain grasslands by means of SAR RADARSAT2 images and hydrological modeling. <italic>Journal of Hydrology</italic> ,516, 245-257. <pub-id pub-id-type="doi">10.1016/j.jhydrol.2014.02.018</pub-id></mixed-citation></ref>
<ref id="R586"><mixed-citation>Bhagat, V. S., 2012. Use of remote sensing techniques for robust digital change detection of land: a review. <italic>Recent Patents on Space Technology</italic>, 2 (2), 123-144. <pub-id pub-id-type="doi">10.2174/1877611611202020123</pub-id></mixed-citation></ref>
<ref id="R587"><mixed-citation>Bhagat, V. S., 2014. Space-borne passive microwave remote sensing of soil moisture: a Review. <italic>Recent Patents on Space Technology</italic>, 4, 119-150.</mixed-citation></ref>
<ref id="R588"><mixed-citation>Blumberg, D. G., Freilikher, V., Kaganovskii, Y. and Maradudin, A. A., 2002. Subsurface microwave remote sensing of soil-water content:Field studies in the Negev Desert and optical modelling.<italic>International Journal of Remote Sensing</italic>, 23(19), 4039-4054. <pub-id pub-id-type="doi">10.1080/01431160110116329</pub-id></mixed-citation></ref>
<ref id="R589"><mixed-citation>Bosisio, A.V. and Dechambre, M., 2004. Predictions of microwave attenuation through vegetation: a comparison with measurements. <italic>Int. J. Remo. Sens.</italic>, 25(19), 3973-3997. <pub-id pub-id-type="doi">10.1080/01431160310001657524</pub-id></mixed-citation></ref>
<ref id="R590"><mixed-citation>Bourgeau<bold>-</bold>Chavez, L. L., Kasischke, E. S., Riordan, K., Brunzell, S., Nolan, M., Hyer, E., Slawski, J., Medvecz, M., Walters, T. and Ames, S., 2007. Remote monitoring of spatial and temporal surface soil moisture in fire disturbed boreal forest ecosystems with ERS SAR imagery. <italic>Int. J. Rem. Sens.</italic>, 28(10), 2133-2162. <pub-id pub-id-type="doi">10.1080/01431160600976061</pub-id></mixed-citation></ref>
<ref id="R591"><mixed-citation>Braun, A. and Hochschild, V., 2017. Potential and Limitations of Radar Remote Sensing for Humanitarian Operations. <italic>Journal for Geographic Information Science</italic>, 1, 228-243. <pub-id pub-id-type="doi">10.1553/giscience2017_01_s228</pub-id></mixed-citation></ref>
<ref id="R592"><mixed-citation>Brisco, B., Schmitt, A., Murnaghan, K., Kaya, S. and Roth, A., 2013. SAR polarimetric change detection for flooded vegetation. <italic>International Journal of Digital Earth</italic>, 6(2), 103-114. <pub-id pub-id-type="doi">10.1080/17538947.2011.608813</pub-id></mixed-citation></ref>
<ref id="R593"><mixed-citation>Brocca, L.,Melone, F. ,Moramarco, T., Wagner, W., Naeimi, V., Bartalis Z. and Hasenauer, S., 2010. Improving runoff prediction through the assimilation of the ASCAT soil moisture product. <italic>Hydrol. Earth Syst. Sci.</italic>, 14, 1881-1893. <pub-id pub-id-type="doi">10.5194/hess-14-1881-2010</pub-id></mixed-citation></ref>
<ref id="R594"><mixed-citation>Burgin, M. S, Khankhoje, U. K., Duan, X., and Moghaddam, M., 2016. Generalized terrain topography in radar scattering models. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 54(7), 3944-3952. <pub-id pub-id-type="doi">10.1109/TGRS.2016.2532123</pub-id></mixed-citation></ref>
<ref id="R595"><mixed-citation>Callens, M., Verhoest, N. E. C. and Davidson, M. W. J., 2006. Parameterization of tillage-induced single-scale soil roughness from 4-m profiles. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 44(4), 478-488. <pub-id pub-id-type="doi">10.1109/TGRS.2005.860488</pub-id></mixed-citation></ref>
<ref id="R596"><mixed-citation>Chauhan, N. S., 1997. Soil moisture estimation under a vegetation cover: combined active passive microwave remote sensing approach. <italic>Int. J. Remo. Sens.</italic>, 18(5), 1079-1097. <pub-id pub-id-type="doi">10.1080/014311697218584</pub-id></mixed-citation></ref>
<ref id="R597"><mixed-citation>Chauhan, N. S., 2002. Soil moisture inversion at L-band using adual-polarization technique: A model-based sensitivity analysis. <italic>Int. J. Rem. Sens.</italic>, 23(16), 3209-3227. <pub-id pub-id-type="doi">10.1080/01431160210136597</pub-id></mixed-citation></ref>
<ref id="R598"><mixed-citation>Choudhury, B. J., Chang, A. T. C. , Salomonson, V. V., Schmugge, T. J. and Wang, J. R., 1975. Preliminary results of SAR soil moisture experiment, November 1975. NASA Technical Paper 1404.</mixed-citation></ref>
<ref id="R599"><mixed-citation>Colliander, A., Njoku, E. G., Jackson, R. J., Chazanoff, S., McNairn, H., Powers, J. and Cosh, M. H., 2016. Retrieving soil moisture for non-forested areas using PALS radiometermeasurements in SMAPVEX12 field campaign. <italic>Remote Sensing of Environment</italic>, 184, 86-100. <pub-id pub-id-type="doi">10.1016/j.rse.2016.06.001</pub-id></mixed-citation></ref>
<ref id="R600"><mixed-citation>Das, K. and Paul, P. K, 2015. Present status of soil moisture estimation by microwave remote sensing. <italic>Cogent Geoscience</italic>, 1, 1084669. <pub-id pub-id-type="doi">10.1080/23312041.2015.1084669</pub-id></mixed-citation></ref>
<ref id="R601"><mixed-citation>Das, K. and Paul, P.K., 2015. Soil moisture retrieval model by using RISAT-1, C-band data in tropical dry and sub-humid zone of Bankura district of India. <italic>The Egyptian Journal of Remote Sensing and Space Sciences</italic>, 18, 297-310. <pub-id pub-id-type="doi">10.1016/j.ejrs.2015.09.004</pub-id></mixed-citation></ref>
<ref id="R602"><mixed-citation>Das, N. N., Mohanty, B. P. and Njoku, E.G., 2008. Characterization of backscatter by surface features in L-band active microwave remote sensing of soil moisture, <italic>IGARSS.</italic> <pub-id pub-id-type="doi">10.1109/IGARSS.2008.4779119</pub-id></mixed-citation></ref>
<ref id="R603"><mixed-citation>Djamai, N., Magagi, R., Goïta, K, Hosseini, M., Cosh, M. H., Berg, A. and Toth, B., 2015. Evaluation of SMOS soil moisture products over the CanEx-SM10 area. <italic>Journal of Hydrology</italic>, 520, 254-267. <pub-id pub-id-type="doi">10.1016/j.jhydrol.2014.11.026</pub-id></mixed-citation></ref>
<ref id="R604"><mixed-citation>Dobson, M. C., Ulaby, F. T., Hallikainen, M. and El Rayes, M., 1985. Microwave dielectric behaviour of wet soil – part II: dielectric mixing models. <italic>IEEE Transaction on Geoscience and Remote Sensing</italic>, GE-23, 35-46. <pub-id pub-id-type="doi">10.1109/TGRS.1985.289498</pub-id></mixed-citation></ref>
<ref id="R605"><mixed-citation>Du, J., Shi, J. and Sun, R., 2010. The development of HJ SAR soil moisture retrieval algorithm. <italic>Int. J. Remo. Sens.</italic>, 31(14), 3691-3705. <pub-id pub-id-type="doi">10.1080/01431161.2010.483486</pub-id></mixed-citation></ref>
<ref id="R606"><mixed-citation>Dubois, P. C., van Zyl, J. and Engman, T., 1995. Measuring soil moisture with imaging radars. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 33(4), 915-926. <pub-id pub-id-type="doi">10.1109/36.406677</pub-id></mixed-citation></ref>
<ref id="R607"><mixed-citation>Dwivedi, R. S., Rao, B. R. M. and Kushwaha, S. P. S., 2000. The utility of day-and-night observation and cloud- penetration capability of ERS-1 SAR data for detection of wetlands. <italic>Geocarto International</italic>, 15(1), 7-12. <pub-id pub-id-type="doi">10.1080/10106040008542134</pub-id></mixed-citation></ref>
<ref id="R608"><mixed-citation>Entekhabi, D., Entekhabi, D. Njoku, E. G., O’Neill, P. E., Kellogg, K. H., Crow, W. T., Edelstein, W. N., Entin, J. K., Goodman, S. D., Jackson, T. J., Johnson, J., Kimball, J., Piepmeier, J. R., Koster, R. D., Martin, N., McDonald, K. C., Moghaddam, M., Moran, S., Reichle, R., Shi, J. C., Spencer, M. W., Thurman, S.W., Tsang, L. and Van Zyl, J., 2010. The soil moisture active passive (SMAP) mission. <italic>Proceedings of the IEEE</italic>, 98.5, 704-716. <pub-id pub-id-type="doi">10.1109/JPROC.2010.2043918</pub-id></mixed-citation></ref>
<ref id="R609"><mixed-citation>Fernandez-Moran, R., Wigneron, J.-P., Lopez-Baeza, E., Al-Yaari, A., Coll-Pajaron, A., Mialon, A., Miernecki, M., Parrens, M., Salgado-Hernanz, P. M., Schwank, M., Wang, S. and Kerr, Y. H., 2015. Roughness and vegetation parameterizations at L-band for soil moisture retrievals over a vineyard field. <italic>Remote Sensing of Environment</italic>, 170, 269-279. <pub-id pub-id-type="doi">10.1016/j.rse.2015.09.006</pub-id></mixed-citation></ref>
<ref id="R610"><mixed-citation>Filion, R., Bernier, M., Paniconi, C., Chokmani, K., Melis, M., Soddu, A., Talazac, M., and Lafortune, F-X, 2016. Remote sensing for mapping soil moisture and drainage potential in semi-arid regions: applications to the Campidano plain of Sardinia, Italy. <italic>Science of the Total Environment</italic>. 573, 862-876. <pub-id pub-id-type="doi">10.1016/j.scitotenv.2015.07.068</pub-id></mixed-citation></ref>
<ref id="R611"><mixed-citation>Fung, A.K., 1994. <italic>Microwave Scattering and Emission Models and Their Applications,</italic> Norwood, MA: Artech House.</mixed-citation></ref>
<ref id="R612"><mixed-citation>Geng, H., Gwyn, Q. H. J, Brisco, B., Boisvert, J. and Brown, R. J., 1996. Mapping of soil moisture from c-band radar images. <italic>Canadian Journal of Remote Sensing,</italic> 22(1), 117-126. <pub-id pub-id-type="doi">10.1080/07038992.1996.10874642</pub-id></mixed-citation></ref>
<ref id="R613"><mixed-citation>Gharechelou, S., Tateishi, R. and Sumantyo, J.T.S., 2015. Interrelationship analysis of L-band backscattering intensity and soil dielectric constant for soil moisture retrieval using PALSAR data. <italic>Advances in Remote Sensing</italic>, 4, 15-24. <pub-id pub-id-type="doi">10.4236/ars.2015.41002</pub-id></mixed-citation></ref>
<ref id="R614"><mixed-citation>Gherboudj, I., Magagi, R., Berg, A. A. and Toth, B., 2011. Soil moisture retrieval over agricultural fields from multi-polarized andmulti-angular RADARSAT-2 SAR data. <italic>Remote Sensing of Environment,</italic> 115, 33-43. <pub-id pub-id-type="doi">10.1016/j.rse.2010.07.011</pub-id></mixed-citation></ref>
<ref id="R615"><mixed-citation>Gorrab, A., Zribi M., Baghdadi N., Mougenot B., Fanise P. and Chabaane Z. L., 2015. Retrieval of both soil moisture and texture using TerraSAR-X images. <italic>Remote Sens. 7</italic>, 10098-10116. <pub-id pub-id-type="doi">10.3390/rs70810098</pub-id></mixed-citation></ref>
<ref id="R616"><mixed-citation>Gorrab, A., Zribi, M., Baghdadi, N. and Chabaane, Z. L., 2015. Mapping of bare soil surface parameters from TerraSAR-X radar images over a semi-arid region. Proc. of SPIE, 9637, 96371F-1. <pub-id pub-id-type="doi">10.1117/12.2194947</pub-id></mixed-citation></ref>
<ref id="R617"><mixed-citation>Hajj, M.E., Baghdadi, N., Zribi, M., Belaud, G, Cheviron, B., Courault, D. and Charron, F., 2016. Soil moisture retrieval over irrigated grassland using X-band SAR data. <italic>Remote Sensing of Environment</italic>, 176, 202-218. <pub-id pub-id-type="doi">10.1016/j.rse.2016.01.027</pub-id></mixed-citation></ref>
<ref id="R618"><mixed-citation>Hallikainen, M.T., Ulaby, F.T., Dobson, M.C., Elrayes, M.A. and Wu, L. K., 1985. Microwave dielectric behavior of wet soil. 1: empirical models and experimental observations. <italic>IEEE Trans. Geosci. Remote Sens</italic>. 23 (1), 25-34. <pub-id pub-id-type="doi">10.1109/TGRS.1985.289497</pub-id></mixed-citation></ref>
<ref id="R619"><mixed-citation>Hégarat<bold>-</bold>Mascl, S. L., Zribi, M., Alem, F., Weisse, A. and Loumagne, C., 2002. Soil moisture estimation from ERS/SAR data: toward an operational methodology. IEEE Transactions on Geoscience and Remote Sensing, 40(12), 2647-2658. <pub-id pub-id-type="doi">10.1109/TGRS.2002.806994</pub-id></mixed-citation></ref>
<ref id="R620"><mixed-citation>Högström, E and Bartsch, A., 2017. Impact of backscatter variations over water bodies on coarse-scale radar retrieved soil moisture and the potential of correcting with meteorological data<italic>. EEE Transactions on Geoscience and Remote Sensing</italic>, 55(1), 3-13. <pub-id pub-id-type="doi">10.1109/TGRS.2016.2530845</pub-id></mixed-citation></ref>
<ref id="R621"><mixed-citation>Holah, N., Baghdadi, N., Zribi, M., Bruand, A. and King, C., 2005. Potential of ASAR/ENVISAT for the characterization of soil surface parameters over bare agricultural fields. <italic>Remote Sensing of Environment</italic>, 96, (1), 78-86. <pub-id pub-id-type="doi">10.1016/j.rse.2005.01.008</pub-id></mixed-citation></ref>
<ref id="R622"><mixed-citation>Hornáček, M., Wagner, W., Sabel, D., Truong, H.-L., Snoeij, P., Hahmann, Diedrich, E. and Doubková, M., 2012. Potential for high resolution systematic global surface soil moisture retrieval via change detection using Sentinel-1. <italic>IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, </italic>5(4), 1303-1311<italic>.</italic> <pub-id pub-id-type="doi">10.1109/JSTARS.2012.2190136</pub-id></mixed-citation></ref>
<ref id="R623"><mixed-citation>Huang, S., Tsang, L., Njoku, E.G. and Chan, K.S., 2010. Backscattering Coefficients, Coherent Reflectivities, and Emissivities of randomly rough soil surfaces at L-band for SMAP applications based on numerical solutions of Maxwell equations in three-dimensional simulations<italic>. IEEE Transactions on Geoscience and Remote Sensing</italic>, 48(6), 2557-2568. <pub-id pub-id-type="doi">10.1109/TGRS.2010.2040748</pub-id></mixed-citation></ref>
<ref id="R624"><mixed-citation>Ines, A. V. M., Das, N. N., Hansen, J. W. and Njoku, E. G., 2013. Assimilation of remotely sensed soil moisture and vegetation with a crop simulation model for maize yield prediction, <italic>Remote Sensing of Environment,</italic>138, 149-164. <pub-id pub-id-type="doi">10.1016/j.rse.2013.07.018</pub-id></mixed-citation></ref>
<ref id="R625"><mixed-citation>Jarlana, L., Mazzegab, P., Mougina, E., Lavenua, F. , Martya, G., Frisonc, P.L. and Hiernaux, P., 2003. Mapping of Sahelian vegetation parameters from ERS scatterometer data with an evolution strategies algorithm. <italic>Remote Sensing of Environment</italic>, 87, 72-84. <pub-id pub-id-type="doi">10.1016/S0034-4257(03)00164-0</pub-id></mixed-citation></ref>
<ref id="R626"><mixed-citation>Jensen, J.R., 1996, Principal component analysis. In <italic>Introductory Digital Image Processing; A Remote Sensing Perspective</italic>, K. C. Clarke (Ed.), 172–179.</mixed-citation></ref>
<ref id="R627"><mixed-citation>Jeu, De R.A. M., Wagner, W., Holmes, T. R. H., Dolman, A. J., van de Giesen, N. C. and Friesen, J., 2008. Global soil moisture patterns observed by space borne microwave radiometers and scatterometers. <italic>Surv Geophys</italic>, 29,399-420. <pub-id pub-id-type="doi">10.1007/s10712-008-9044-0</pub-id></mixed-citation></ref>
<ref id="R628"><mixed-citation>Ji, J., van der Keur, P., Thomsen, A. and Skriver, H., 1996. Soil moisture retrieval using the Danish L- and C-band polarimetric SAR. <italic>In Proceedings of the IEEE International Geoscience and Remote Sensing Symposium </italic>(IGARSS &apos;96), Lincoln, NB, USA, 2, 1300-1302. <pub-id pub-id-type="doi">10.1109/IGARSS.1996.516643</pub-id></mixed-citation></ref>
<ref id="R629"><mixed-citation>Jia, B. H., Xie, Z. H., Tian, X. J., and Shi, C. X., 2009. A soil moisture assimilation scheme based on the ensemble Kalman filter using microwave brightness temperature. <italic>SciChinaSer D-Earth Sci</italic>, 52(11), 1835-1848. <pub-id pub-id-type="doi">10.1007/s11430-009-0122-z</pub-id></mixed-citation></ref>
<ref id="R630"><mixed-citation>Joseph, A. T., Van Der Velde, R., O’Neill, P. E., Lang, R. H. and GishT. 2008. Soil moisture retrieval during a corn growth cycle using L-band (1.6 Ghz) radar observations. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 46, 2365-2374. <pub-id pub-id-type="doi">10.1016/j.rse.2010.05.017</pub-id> <ext-link ext-link-type="uri" xlink:href="http://www.sciencedirect.com/science/article/pii/S0034425710001641">http://www.sciencedirect.com/science/article/pii/S0034425710001641</ext-link></mixed-citation></ref>
<ref id="R631"><mixed-citation>Joseph, A. T., Van Der Velde, R., O’Neill, P. E., Lang, R. H. and GishT. 2008. Soil Moisture Retrieval during a Corn Growth Cycle Using L-Band (1.6 Ghz) Radar Observations. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 46, 2365-2374. <pub-id pub-id-type="doi">10.1109/TGRS.2008.917214</pub-id></mixed-citation></ref>
<ref id="R632"><mixed-citation>Kaojarern, S., Le Toan, T. and Davidson, M. W. J., 2004. Monitoring surface soil moisture in post-harvest rice areas using C-band radar imagery in Northeast Thailand. <italic>Geocarto International</italic>, 19(3), 61-71. <pub-id pub-id-type="doi">10.1080/10106040408542319</pub-id></mixed-citation></ref>
<ref id="R633"><mixed-citation>Kelly, R. E. J., Davie, T. J. A. and Atkinson, P. M., 2003. Explaining temporal and spatial variation in soil moisture in a bare field using SAR imagery. <italic>Int. J. Remo. Sens.</italic>, 24(15), 3059-3074. <pub-id pub-id-type="doi">10.1080/01431160110115771</pub-id></mixed-citation></ref>
<ref id="R634"><mixed-citation>Kim, S., van Zyl, J., McDonald, K. and Njoku, E., 2010. Monitoring surface soil moisture and freeze-thaw state with the high-resolution radar of the Soil Moisture Active/Passive (SMAP) mission. <italic>IEEE</italic>, 735-739. <pub-id pub-id-type="doi">10.1109/RADAR.2010.5494523</pub-id></mixed-citation></ref>
<ref id="R635"><mixed-citation>Kim, Y., Jackson, T., Bindlish, R., Lee, H. and Hong, S., 2012. Radar vegetation index for estimating the vegetation water content of Rice and Soybean. <italic>IEEE Geoscience and Remote Sensing Letters</italic>, 9(4), 564-568. <pub-id pub-id-type="doi">10.1109/LGRS.2011.2174772</pub-id></mixed-citation></ref>
<ref id="R636"><mixed-citation>Kirimi, F., Kuria, D. N., Thonfeld, F., Amler, E., Mubea, K., Misana, S. and Menz, G., 2016. Influence of vegetation cover on the Oh soil moisture retrieval model: a case study of the Malinda Wetland, Tanzania. <italic>Advances in Remote Sensing</italic>, 5, 28-42. <pub-id pub-id-type="doi">10.4236/ars.2016.51003</pub-id></mixed-citation></ref>
<ref id="R637"><mixed-citation>Kong, X. and Dorling, S. R., 2008. Near<bold>-</bold>surface soil moisture retrieval from ASAR Wide Swath imagery using a Principal Component Analysis. <italic>Int. J. Remo. Sens.</italic>, 29(10), 2925-2942. <pub-id pub-id-type="doi">10.1080/01431160701442088</pub-id></mixed-citation></ref>
<ref id="R638"><mixed-citation>Kumar, S., Khati, U.G, Chandola, S., Agrawal, S. and Kushwaha, S.P.S, 2017. Polarimetric SAR Interferometry based modeling for tree height and aboveground biomass retrieval in a tropical deciduous forest. <italic>Advances in Space Research</italic>, 60, 571-586. <pub-id pub-id-type="doi">10.1016/j.asr.2017.04.018</pub-id></mixed-citation></ref>
<ref id="R639"><mixed-citation>Kurucu, Y., Balik Sanli, F., Esetlili, M. T., Bolca, M. and Goksel, C., 2009. Contribution of SAR images to determination of surface moisture on the Menemen Plain, Turkey. <italic>Int. J. Remo. Sens.</italic>, 30(7), 1805-1817. <pub-id pub-id-type="doi">10.1080/01431160802639764</pub-id></mixed-citation></ref>
<ref id="R640"><mixed-citation>Laur, H., Bally, P., Meadows, P., Sanchez, J., Schaettler, J. and Lopinto, E., 1996. ERS SAR calibration: derivation of backscattering coefficient in ESA ERS SAR PRI products. ES-TN-RS-PM-HL09, 2(2). ESA/ESRIN Unpublished Report.</mixed-citation></ref>
<ref id="R641"><mixed-citation>Li, Q., Shi, J. and Chen, K. S., 2002. A generalized power law spectrum and its applications to the backscattering of soil surfaces based on the integral equation model. <italic>IEEE Trans. Geosci. Remote Sens.</italic>, 40(2), 271-280. <pub-id pub-id-type="doi">10.1109/36.992784</pub-id></mixed-citation></ref>
<ref id="R642"><mixed-citation>Li, X., Song, C., López, S., Li, Y. and López, J. F., 2015. Fast computation of bare soil surface roughness on a Fermi GPU. <italic>Computers and Geosciences</italic>, 82, 38-44. <pub-id pub-id-type="doi">10.1016/j.cageo.2015.05.013</pub-id></mixed-citation></ref>
<ref id="R643"><mixed-citation>Liu, L., Liao, J., Chen, X., Zhou, G., Su, Y., Xiang, Z., Wang, Z., Liu, X., Li, Y., Wu, J., Xiong, X. and Shao, H., 2017. The microwave temperature vegetation drought index (MTVDI) basedon AMSR-E brightness temperatures for long-term drought assessmentacross China (2003-2010). <italic>Remote Sensing of Environment</italic>, 199, 302-320. <pub-id pub-id-type="doi">10.1016/j.rse.2017.07.012</pub-id></mixed-citation></ref>
<ref id="R644"><mixed-citation>Lu, Z. and Meyer, D. J., 2002. Study of high SAR backscattering caused by an increase of soil moisture over a sparsely vegetated area: Implications for characteristics of backscattering. <italic>Int. J. Rem. Sens.</italic>, 23(6), 1063-1074.</mixed-citation></ref>
<ref id="R645"><mixed-citation>Mittelbach, H. and Seneviratne, S. I., 2012. A new perspective on the spatio-temporal variability of soil moisture: temporal dynamics versus time-invariant contributions. <italic>Hydrol. Earth Syst. Sci</italic>., 16, 2169-2179. <pub-id pub-id-type="doi">10.5194/hess-16-2169-2012</pub-id></mixed-citation></ref>
<ref id="R646"><mixed-citation>Mohan, R. R, Paul, B., Mridula S. and Mohanan, P., 2015. Measurement of Soil Moisture Content at Microwave Frequencies. <italic>Procedia Computer Science</italic>, 46, 1238-1245. <pub-id pub-id-type="doi">10.1016/j.procs.2015.01.040</pub-id></mixed-citation></ref>
<ref id="R647"><mixed-citation>Moran, M. S., Peters-Lidard, C. D., Watts, J. M. and McElroy, S., 2004. Estimating soil moisture at the watershed scale with satellite-based radar and land surface models. <italic>Can. J. Remote Sensing</italic>, 30(5), 805-826. <pub-id pub-id-type="doi">10.5589/m04-043</pub-id></mixed-citation></ref>
<ref id="R648"><mixed-citation>Moran, M. S., Hymer, D.C., Qi, J. and Sano, E.E., 2000. Soil moisture evaluation using multi-temporal synthetic aperture radar (SAR) in semiarid rangeland. <italic>Agricultural and Forest Meterology,</italic> 105, 69-80. <pub-id pub-id-type="doi">10.5589/m04-043</pub-id></mixed-citation></ref>
<ref id="R649"><mixed-citation>Narayanan, R.M. and Hegde, M. S., 2000. Soil moisture estimation using combined multi-frequency SAR data: a comparison between two inversion models using simulation. <italic>Geocarto International</italic>,15(3),65-76. <pub-id pub-id-type="doi">10.1080/10106040008542165</pub-id></mixed-citation></ref>
<ref id="R650"><mixed-citation>Narayanan, R.M., Horner, J.R. and St. Germain, K.M., 1999. Simulation Study of a Robus Algorithm for Soil Moisture and Surface Roughness Estimation Using L<bold>-</bold>Band Radar Backscatter.<italic>Geocarto International</italic>, 14(1), 6-13. <pub-id pub-id-type="doi">10.1080/10106049908542088</pub-id></mixed-citation></ref>
<ref id="R651"><mixed-citation>Narvekar, P. S., Entekhabi, D., Kim, S.-B. and Njoku, E.G., 2015. Soil moisture retrieval using L-band radar observations. <italic>IEEE Trans. Geosci. Remote Sens.</italic>, 53, 3492-3506. <pub-id pub-id-type="doi">10.1109/TGRS.2014.2377714</pub-id></mixed-citation></ref>
<ref id="R652"><mixed-citation>Necsoiu, M., Longépé, N. and Hooper, D.M., 2013. A new methodology to monitor soil moisture over a complex arctic environment, Kobuk River valley, Alaska. <italic>Remote Sensing Letters</italic>, 4(3), 251-260. <pub-id pub-id-type="doi">10.1080/2150704X.2012.723147</pub-id></mixed-citation></ref>
<ref id="R653"><mixed-citation>Oh, Y., 2004. Quantitative retrieval of soil moisture content and surface roughness from multipolarized radar observations of bare soil sur- faces. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 42, 591-601. <pub-id pub-id-type="doi">10.1109/TGRS.2003.821065</pub-id></mixed-citation></ref>
<ref id="R654"><mixed-citation>Oh, Y., Sarabandi, K. and Ulaby, F. T., 1992. An empirical model and an inversion technique for radar scattering from bare soil surfaces. <italic>IEEE Trans. Geoscience and Remote Sensing</italic>, 30(2), 370-381. <pub-id pub-id-type="doi">10.1109/36.134086</pub-id></mixed-citation></ref>
<ref id="R655"><mixed-citation>Oh, Y., Sarabandi, K. and Ulaby, F. T., 2002. Semi-empiricalmodel of the ensemble-averaged differential Muellermatrix formicrowave back-scattering frombare soil surfaces. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 40, 1348-1355. <pub-id pub-id-type="doi">10.1109/TGRS.2002.800232</pub-id></mixed-citation></ref>
<ref id="R656"><mixed-citation>Ouchi, K. 2013. Recent Trend and Advance of Synthetic Aperture Radar with Selected Topics. <italic>Remote Sens</italic>, 5(2), 716-807. <pub-id pub-id-type="doi">10.3390/rs5020716</pub-id></mixed-citation></ref>
<ref id="R657"><mixed-citation>Paloscia, S., Pampaloni, P., Pettinato, S. and Santi, E., 2008. A comparison of algorithms for retrieving soil moisture from ENVISAT/ASAR images. <italic>IEEE Transactions on Geoscience and Remote Sensing,</italic> 46(10), 3274- 3284. <pub-id pub-id-type="doi">10.1109/TGRS.2008.920370</pub-id></mixed-citation></ref>
<ref id="R658"><mixed-citation>Paloscia, S., Pampaloni, P., Pettinato, S. and Santi, E., 2010. Generation of soil moisture maps from ENVISAT/ASAR images in mountainous areas: a case study. <italic>Int. J. Remo. Sens.</italic>, 31(9), 2265-2276. <pub-id pub-id-type="doi">10.1080/01431160902953891</pub-id></mixed-citation></ref>
<ref id="R659"><mixed-citation>Paloscia, S., Pampaloni, P., Pettinato, S., Poggi P. and Santi E., 2005. The Retrieval of Soil Moisture from ENVISAT/ASAR Data. <italic>EARSeL eProceedings,</italic> 4, 44-51.</mixed-citation></ref>
<ref id="R660"><mixed-citation>Pant, T., Singh, D. and Srivastava, T., 2010. The potential application of fractal approach for surface roughness retrieval: A study for simulated surfaces. <italic>Geomatics, Natural Hazards and Risk</italic>, 1(3), 243-257. <pub-id pub-id-type="doi">10.1080/19475705.2010.494835</pub-id></mixed-citation></ref>
<ref id="R661"><mixed-citation>Pasolli, L., Notarnicola, C., Bertoldi, G., Dellachiesa, S., Niedrist, G., Bruzzone, L., Tappeiner, U. and Zebisch, M., 2014. Soil moisture monitoring in mountain areas by using high-resolution SAR images: results from a feasibility study. European Journal of Soil Science, <pub-id pub-id-type="doi">10.1111/ejss.12189</pub-id></mixed-citation></ref>
<ref id="R662"><mixed-citation>Patel, P. and Srivastava, H.S., 2015. An approach to validate soil moisture derived from passive microwave sensors using SAR as an interface. <italic>Int. J. Remo. Sens.</italic>, 36(9), 2353-2374. <pub-id pub-id-type="doi">10.1080/01431161.2015.1034889</pub-id></mixed-citation></ref>
<ref id="R663"><mixed-citation>Patel, P., Srivastava, H.S., Panigrahy S. and Parihar J.S., 2006. Comparative evaluation of the sensitivity of multi-polarized multi-frequency SAR backscatter to plant density. <italic>Int. J. Remo. Sens.</italic>, 27(2), 293-305. <pub-id pub-id-type="doi">10.1080/01431160500214050</pub-id></mixed-citation></ref>
<ref id="R664"><mixed-citation>Pathe, C., Wagner, W., Sabel, D., Doubkova, M. and Basara, J.B., 2009. Using ENVISAT ASAR GlobalMode Data for surface soilmoisture retrieval over Oklahoma, USA. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 47(2), 468-480. <pub-id pub-id-type="doi">10.1109/TGRS.2008.2004711</pub-id></mixed-citation></ref>
<ref id="R665"><mixed-citation>Pellarin, T., Laurent, J. P., Cappelaere, B., Decharme, B., Descroix, L. and Ramier, D., 2009. Hydrological modelling and associated microwave emission of a semi-arid region in South-western Niger. <italic>Journal of Hydrology,</italic> 375, 262-272. <pub-id pub-id-type="doi">10.1016/j.jhydrol.2008.12.003</pub-id></mixed-citation></ref>
<ref id="R666"><mixed-citation>Piles, M., McColl, K.A., Entekhabi, D., Das, N. and Pablos, M., 2015. Sensitivity of aquarius active and passive measurements temporal covariability to land surface characteristics. <italic>IEEE Transactions on Geoscience and Remote Sensing, </italic>53(8), 4700-4711. <pub-id pub-id-type="doi">10.1109/TGRS.2015.2407611</pub-id></mixed-citation></ref>
<ref id="R667"><mixed-citation>Rahman, M. M and Sumantyo, J.T.S., 2012. Quantifying deforestation in the Brazilian Amazon using Advanced Land Observing Satellite Phased Array L- band Synthetic Aperture Radar (ALOS PALSAR) and Shuttle Imaging Radar (SIR)-C data. <italic>Geocarto International</italic>, 27(6), 463-478. <pub-id pub-id-type="doi">10.1080/10106049.2011.638987</pub-id></mixed-citation></ref>
<ref id="R668"><mixed-citation>Rahman, M. M., Moran, M.S., Thoma, D.P., Bryant, R., Holifield Collins, C.D., Jackson T., Orr B.J., and Tischler M., 2008. Mapping surface roughness and soil moisture using multi-angle radar imagery without ancillary data. <italic>Remote Sensing of Environment,</italic> 112, 391-402. <pub-id pub-id-type="doi">10.1016/j.rse.2006.10.026</pub-id></mixed-citation></ref>
<ref id="R669"><mixed-citation>Rowell, D. L., 1994. <italic>Soil Science: Methods and Applications</italic> (Harlow: Longman Group).</mixed-citation></ref>
<ref id="R670"><mixed-citation>Rogan, J. and Chen, D.M., 2004. Remote sensing technology for mapping and monitoring land-cover and land-use change. <italic>Progress in Planning</italic>, 60, 301-325. <pub-id pub-id-type="doi">10.1016/S0305-9006(03)00066-7</pub-id></mixed-citation></ref>
<ref id="R671"><mixed-citation>Romshoo, S.A. and Musiake, K., 2004. Assessing the potential of space-borne C-band SAR data for spatial soil moisture information over a large area. <italic>Geocarto International</italic>, 19(1), 65-75. <pub-id pub-id-type="doi">10.1080/10106040408542300</pub-id></mixed-citation></ref>
<ref id="R672"><mixed-citation>Rötzer, K., Montzka, C. and Vereecken, H., 2015. Spatio-temporal variability of global soil moisture products. <italic>Journal of Hydrology</italic>, 522, 187-202. <pub-id pub-id-type="doi">10.1016/j.jhydrol.2014.12.038</pub-id></mixed-citation></ref>
<ref id="R673"><mixed-citation>Sahebi, M. R., Bonn, F. and Bénié G. B., 2004. Neural networks for the inversion of soil surface parameters from synthetic aperture radar satellite data. <italic>Can. J. Civ. Eng.</italic>, 31, 95-108. <pub-id pub-id-type="doi">10.1139/l03-079</pub-id></mixed-citation></ref>
<ref id="R674"><mixed-citation>Said, S., Kothyari, U.C. and Arora, M. K., 2012. Vegetation effects on soil moisture estimation from ERS-2 SAR images. <italic>Hydrological Sciences Journal</italic>, 57(3), 517-534. <pub-id pub-id-type="doi">10.1080/02626667.2012.665608</pub-id></mixed-citation></ref>
<ref id="R675"><mixed-citation>Saindranath, J., Narasimha Rao, P. V. and Thiruvengadachari, S., 2000. Radarsat data analysis for monitoring and evaluation of irrigation projects in the monsoon. <italic>Int. J. Remo. Sens.</italic>, 21(17), 3219-3226. <pub-id pub-id-type="doi">10.1080/014311600750019840</pub-id></mixed-citation></ref>
<ref id="R676"><mixed-citation>Sanli, F. B., Kurucu, Y., Esetlili,, M. T. and Abdikan, S., 2008. Soil moisture estimation from RADARSAT-1, ASAR and PALSAR data in agricultural fields of Menemen Plane of Western Turkey. <italic>Int. Archives of the Photogrammetry, Remote Sensing and Spatial Information Science</italic>, 37, Part- B7, Beijing.</mixed-citation></ref>
<ref id="R677"><mixed-citation>Sano, E.E., Huete, A. R., Troufleau, D., Moran, M. S. and Vidal, A., 1998. Relation between ERS-1 synthetic aperture radar data and measurements of surface roughness and moisture content of rocky soils in a semiarid rangeland. <italic>Water Resources Research</italic>, 34(6), 1491-1498. <pub-id pub-id-type="doi">10.1029/98WR00032</pub-id></mixed-citation></ref>
<ref id="R678"><mixed-citation>Santi, E., Paloscia, S., Pettinato, S., Notarnicola, C., Pasolli, L. and Pistocchi, A., 2013. Comparison between SAR Soil Moisture Estimates and Hydrological Model Simulations over the Scrivia Test Site. <italic>Remote Sens. </italic>5, 4961-4976. <pub-id pub-id-type="doi">10.3390/rs5104961</pub-id></mixed-citation></ref>
<ref id="R679"><mixed-citation>Schmugge, T., 1976. <italic>Remore Sensing of Soil Moisture</italic>. Goddard Space Flight Center, Greenbelt, Maryland.</mixed-citation></ref>
<ref id="R680"><mixed-citation>Schumann, G. and Di Baldassarre, G., 2010. The direct use of radar satellites for event-specific flood risk mapping. <italic>Remote Sensing Letters</italic>, 1(2), 75-84. <pub-id pub-id-type="doi">10.1080/01431160903486685</pub-id></mixed-citation></ref>
<ref id="R681"><mixed-citation>Shoshany, M., Svoray, T., Curran, P. J., Foody, G. M. and Perevolotsky, A., 2000. The relationship between ERS-2 SAR backscatter and soil moisture: generalization from a humid to semi-arid transect. <italic>Int. J. Remo. Sens.</italic>, 21(11), 2337-2343. <pub-id pub-id-type="doi">10.1080/01431160050029620</pub-id></mixed-citation></ref>
<ref id="R682"><mixed-citation>Singh, G. and Venkataraman, G., 2010. Snow permittivity retrieval inversion algorithm for estimating snow wetness. <italic>Geocarto International</italic>, 25(3), 187-212. <pub-id pub-id-type="doi">10.1080/10106040903486130</pub-id></mixed-citation></ref>
<ref id="R683"><mixed-citation>Song, K., Zhou, X. and Fan, Y., 2009. Empirically Adopted IEM for Retrieval of Soil Moisture From Radar Backscattering Coefficient. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 47(6), 1662-1672. <pub-id pub-id-type="doi">10.1109/TGRS.2008.2009061</pub-id></mixed-citation></ref>
<ref id="R684"><mixed-citation>Sonobe, R., Tani, H., Wang, X. and Fukuda, M., 2008. Estimation of soil moisture for bare soil fields using ALOS/PALSAR HH Polarization data. <italic>Agricultural Information Research</italic>, 17(4), 171-177. <pub-id pub-id-type="doi">10.3173/air.17.171</pub-id></mixed-citation></ref>
<ref id="R685"><mixed-citation>Srivastava, H. S., Patel, P., Navalgund, R. R. and Sharma, Y., 2008. Retrieval of surface roughness using multi-polarized Envisat-1 ASAR data. <italic>Geocarto International</italic>, 23(1), 67-77. <pub-id pub-id-type="doi">10.1080/10106040701538157</pub-id></mixed-citation></ref>
<ref id="R686"><mixed-citation>Srivastava, H. S., Sharma, P.K, Kumar, D., Sivasankar, T., Mishra, R.S., Mishra, M. and Patel, P., 2015. Soil moisture variation over parts of Saharanpur and Haridwar districts (India) during November-2006 to June-2007 as observed by multi-polarized (VV/HH and VV/VH) ENVISAT-1 temporal ASAR data. <italic>International Journal of Advanced Engineering Research and Science (IJAERS),</italic> 2(1), 31-39.</mixed-citation></ref>
<ref id="R687"><mixed-citation>Thoma, D., Moran, M., Bryant, R., Holifield Collins, C., Rahman, M. and Skirvin, S., 2004. Comparison of two methods for extracting surface soil moisture from C-band radar imagery. In Proceedings of the <italic>IEEE International Geoscience and Remote Sensing Symposium (IGARSS 04)</italic>, Anchorage, AK, USA, 827-830. <pub-id pub-id-type="doi">10.1109/IGARSS.2004.1368532</pub-id></mixed-citation></ref>
<ref id="R688"><mixed-citation>Tomer, S. T., Al Bitar, A., Sekhar, M, Zribi, M., Bandyopadhyay, S., Sreelash, K., Sharma,. A.K., Corgne, S. and Kerr, Y., 2015. Retrieval and Multi-scale Validation of Soil Moisture from Multi-temporal SAR Data in a Semi-Arid Tropical Region. <italic>Remote Sens.</italic>, 7, 8128-8153. <pub-id pub-id-type="doi">10.3390/rs70608128</pub-id></mixed-citation></ref>
<ref id="R689"><mixed-citation>Topp, G. C., Davis, J. L., Annan, A. P., 1980. Electromagnetic determination of soil water content: measurements in coaxial transmission lines. <italic>Water Resour. Res.,</italic> 16 (3), 574–582. <pub-id pub-id-type="doi">10.1029/WR016i003p00574</pub-id></mixed-citation></ref>
<ref id="R690"><mixed-citation>Ulaby, F. T., Moore, R. K. and Fung, A. K., 1982. <italic>Microwave Remote Sensing: Active and Passive</italic>, Vol. II, Addison-Wesley: Reading, MA, U.S.A.</mixed-citation></ref>
<ref id="R691"><mixed-citation>Ulaby, F. T., Moore, R. K. and Fung, A. K., 1986. <italic>Microwave Remote Sensing: Active and Passive</italic>, Vol. III, Artech House: Dedham, MA, U.S.A.</mixed-citation></ref>
<ref id="R692"><mixed-citation>Ulaby, F. T., Dubois, P.C. and van Zyl, J., 1996. Radar mapping of surface soil moisture. <italic>Journal of Hydrology</italic>, 184, 57-84.</mixed-citation></ref>
<ref id="R693"><mixed-citation>Vachaud, G., Passerat de Silans, A., Balabanis, P. and Vauclin, M., 1985. Temporal stability of spatially measured soil water probability density function. <italic>Soil Sci. Soc. Am. J.</italic>, 49, 822-828. <pub-id pub-id-type="doi">10.2136/sssaj1985.03615995004900040006x</pub-id></mixed-citation></ref>
<ref id="R694"><mixed-citation>Vannier, E. and Taconet, O., 2014. Statistical characterization of bare soil surface microrelief. Advanced Geoscience Remote Sensing <pub-id pub-id-type="doi">10.5772/57244</pub-id> <ext-link ext-link-type="uri" xlink:href="https://www.intechopen.com/books/advanced-geoscience-remote-sensing/statistical-characterization-of-bare-soil-surface-microrelief">https://www.intechopen.com/books/advanced-geoscience-remote-sensing/statistical-characterization-of-bare-soil-surface-microrelief</ext-link></mixed-citation></ref>
<ref id="R695"><mixed-citation>Velde, R. van der, Salama, M. S., Eweys, O.A., Wen, J. and Wang, Q., 2015. Soil moisture mapping using combined active/passive microwave observations over the East of the Netherlands. <italic>IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing</italic>, 8(9), 4355- 4372. <pub-id pub-id-type="doi">10.1109/JSTARS.2014.2353692</pub-id></mixed-citation></ref>
<ref id="R696"><mixed-citation>Verhoest, N.E.C.,Lievens, H., Wagner, W., Alvarez-Mozos, J., Moran, M. S. and Mattia, F., 2008. On the Soil Roughness Parameterization Problem in Soil Moisture Retrieval of Bare Surfaces from Synthetic Aperture Radar. <italic>Sensors,8</italic>, 4213-4248. <pub-id pub-id-type="doi">10.3390/s8074213</pub-id></mixed-citation></ref>
<ref id="R697"><mixed-citation>Wagner, W., Bloschl, G., Pampaloni, P., Calvet, J.-C., Bizzarri, B., Wigneron, J.-P. and Kerr, Y., 2007. Operational Readiness of Microwave Remote Sensing of Soil Moisture of Hydrologic Applications. <italic>Nordic Hydrology</italic>, 38(1), 1-20. <pub-id pub-id-type="doi">10.2166/nh.2007.029</pub-id></mixed-citation></ref>
<ref id="R698"><mixed-citation>Wagner, W., Pathe, C., Doubkova, M., Sabel, D., Bartsch, A, Hasenauer, S., Blöschl G., Scipal, K., Martínez-Fernández, J. and Löw, A., 2008. Temporal stability of soil moisture and radar backscatter observed by the Advanced Synthetic Aperture Radar (ASAR). <italic>Sensors</italic>, 8, 1174-1197. <pub-id pub-id-type="doi">10.3390/s80201174</pub-id></mixed-citation></ref>
<ref id="R699"><mixed-citation>Walker, J. P., Houser, P. R. and Willgoose, G. R., 2004. Active microwave remote sensing for soil moisture measurement: a field evaluation using ERS-2. <italic>Hydrol. Process, </italic>18(11), 1975-1997. <pub-id pub-id-type="doi">10.1002/hyp.1343</pub-id></mixed-citation></ref>
<ref id="R700"><mixed-citation>Wanders, N., Karssenberg, D., Bierkens, M., Parinussa, R., de Jeu, R., van Dam, J. and de Jong, S., 2012. Observation uncertainty of satellite soil moisture products determined with physically-based modeling.<italic> Remote Sensing of Environment, </italic>127, 341-356. <pub-id pub-id-type="doi">10.1016/j.rse.2012.09.004</pub-id></mixed-citation></ref>
<ref id="R701"><mixed-citation>Wang, L. and Qu, J. J., 2009. Satellite remote sensing applications for surface soil moisture monitoring: A review. <italic>Front Earth Sci Chin</italic>, 3(2), 237-247. <pub-id pub-id-type="doi">10.1007/s11707-009-0023-7</pub-id></mixed-citation></ref>
<ref id="R702"><mixed-citation>Wang, C., Qi, J., Moran, S. and Marsett, R., 2004. Soil moisture estimation in a semiarid rangeland using ERS-2 and TM imagery. <italic>Remote Sensing of Environment</italic>, 90, 178-189. <pub-id pub-id-type="doi">10.1016/j.rse.2003.12.001</pub-id></mixed-citation></ref>
<ref id="R703"><mixed-citation>Wang, D., Lin H., Chen, J., Zhang, Y. and Zeng, Q., 2010. Application of multi-temporal ENVISAT ASAR data to agricultural area mapping in the Pearl River Delta. <italic>Int. J. Remo. Sens.</italic>, 31(6), 1555-1572. <pub-id pub-id-type="doi">10.1080/01431160903475258</pub-id></mixed-citation></ref>
<ref id="R704"><mixed-citation>Wang, S., Wigneron, J.-P., Jiang, L.-M., Parrens, M., Yu, X.-Y., Al-Yaari, A., Ye, Q.-Y., Fernandez-Moran, R., Ji, W. and Kerr, Y., 2015. Global-Scale Evaluation of Roughness Effects on C-Band AMSR-E Observations. <italic>Remote Sens.</italic>7, 5734-5757. <pub-id pub-id-type="doi">10.3390/rs70505734</pub-id></mixed-citation></ref>
<ref id="R705"><mixed-citation>Wagner, W. and Scipal, K., 2000. Large-scale soil moisture mapping in Western Africa using the ERS scatterometer. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 38, 1777-1782. <pub-id pub-id-type="doi">10.1109/36.851761</pub-id></mixed-citation></ref>
<ref id="R706"><mixed-citation>Wigneron, J.-P., Calvet, J.-C., Pellarin, T., Van de Griend, A.A., Berger, M. and Ferrazzoli, P., 2003. Retrieving near-surface soil moisture from microwave radiometric observations: current status and future plans. <italic>Remote Sensing of Environment</italic>, 85, 489-506. <pub-id pub-id-type="doi">10.1016/S0034-4257(03)00051-8</pub-id></mixed-citation></ref>
<ref id="R707"><mixed-citation>Yang, H., Shi J., Li Z. and Guo H., 2006. Temporal and spatial soil moisture change pattern detection in an agricultural area using multi-temporal Radarsat ScanSAR data. <italic>Int. J. Remo. Sens.</italic>, 27(19), 4199-4212. <pub-id pub-id-type="doi">10.1080/01431160600754609</pub-id></mixed-citation></ref>
<ref id="R708"><mixed-citation>Yue, J., Yang, G., QI, X. and Wang, Y., 2016. Soil moisture retrieval in well covered farmland by Radarsat 2 SAR data. <italic>Geoscience and Remote Sensing Symposium (IGARSS)</italic>, 1699-1702. <pub-id pub-id-type="doi">10.1109/IGARSS.2016.7729434</pub-id></mixed-citation></ref>
<ref id="R709"><mixed-citation>Zhang, J., 2010. Multi-source remote sensing data fusion: status and trends. <italic>International Journal of Image and Data Fusion</italic>, 1(1), 5-24. <pub-id pub-id-type="doi">10.1080/19479830903561035</pub-id></mixed-citation></ref>
<ref id="R710"><mixed-citation>Zhang, X. Chen, B. Fan, H., Huang, J. and Zhao, H., 2016. The potential use of multi-band SAR data for soil moisture retrieval over bare agricultural areas: Hebei, China. <italic>Remote Sens,</italic> 8 (7), 1-14. <pub-id pub-id-type="doi">10.3390/rs8010007</pub-id></mixed-citation></ref>
<ref id="R711"><mixed-citation>Zhao, S., Zhang, C., Xiong, Y., Xiong, W., You, Y. and Li. Y., 2016. Soil moisture mapping using two scenes SAR imagery without knowing information on surface parameters. <italic>J Indian Soc Remote Sens</italic>, 44(4), 651-656. <pub-id pub-id-type="doi">10.1007/s12524-015-0528-3</pub-id></mixed-citation></ref>
<ref id="R712"><mixed-citation>Zribi, M. and Dechambre, M., 2003. A new empirical model to retrieve soil moisture and roughness from C-band radar data. <italic>Remote Sensing of Environment,</italic> 84, 42-52. <pub-id pub-id-type="doi">10.1016/S0034-4257(02)00069-X</pub-id></mixed-citation></ref>
<ref id="R713"><mixed-citation>Zribi, M., Baghdadi, N., and Guérin, C., 2006. Analysis of surface roughness heterogeneity and scattering behavior for radar measurements. <italic>IEEE Transactions on Geoscience and Remote Sensing</italic>, 44 (9), 2438-2444. <pub-id pub-id-type="doi">10.1109/TGRS.2006.873742</pub-id></mixed-citation></ref>
<ref id="R714"><mixed-citation>Zribi, M., Baghdadi, N., Holah, N., Fafin, O. and Gue´rin, C., 2005. Evaluation of a rough soil surface description withASAR-ENVISAT radar data. <italic>Remote Sensing of Environment</italic>, 95, 67-76. <pub-id pub-id-type="doi">10.1016/j.rse.2004.11.014</pub-id></mixed-citation></ref>
<ref id="R715"><mixed-citation>Zribi, M., Chahbi, A., Shabou, M., Lili-Chabaane, Z., Duchemin, B., Baghdadi, N., Amri, R., and Chehbouni, A., 2011. Soil surface moisture estimation over a semi-arid region using ENVISAT ASAR radar data for soil evaporation evaluation. <italic>Hydrol. Earth. Syst. Sci..</italic>, 15, 345-358. <pub-id pub-id-type="doi">10.5194/hess-15-345-2011</pub-id></mixed-citation></ref>
<ref id="R716"><mixed-citation>Zribi, M., Sahnoun, M., Baghdadi, N., Toan, T. L, Hamida, A. B., 2016. Analysis of the relationship between backscattered P-band radar signals and soil roughness. <italic>Remote Sensing of Environment</italic>, 186, 13-21. <pub-id pub-id-type="doi">10.1016/j.rse.2016.08.006</pub-id></mixed-citation></ref>
<ref id="R717"><mixed-citation>Zribi, M., Saux-Picart, S., André, C., Descroix, L., Ottlé ,C. and Kallel, A., 2007. Soil moisture mapping based on ASAR/ENVISAT radar data over a Sahelian region. <italic>Int. J. Remo. Sens.</italic>, 28(16), 3547-3565. <pub-id pub-id-type="doi">10.1080/01431160601009680</pub-id></mixed-citation></ref>
</ref-list>
</back>
<floats-group>
<fig id="F92"><label>Figure 1</label><caption><title>Behaviour of microwaves with land surface at different wavelengths</title></caption><graphic xlink:href="https://gathacognition.com/uploads/admin/articlefigure/acb5a3a8c6710dd36304ab4ca0016e35.png" mimetype="image" mime-subtype="png"/></fig>
</floats-group>
</article>
